Planning Application Details

1 x Hornbeam (applicants ref. T1) - Remove significant deadwood in the upper limbs on the north side. Inspect remaining limb as there is some evidence of bark peeling on the underside of this limb. 1 x Hornbeam (applicants ref. T2) - Reducing height by up to 50% back to good viable growth points where possible. As many of the cavities as possible should remain in situ for habitat. 1 x Hornbeam (applicants ref. T4) - Reduce or remove limb touching the fence line back to good viable points where possible. 1 x Hornbeam (applicants ref. T6) - Reduce the central stem to just above the cavity to allow for habitats and reduce remaining limbs by up to 3m back to good viable growth points to balance. 1 x Oak (applicants ref. T7) - Remove significant deadwood over footpath. 1 x Hornbeam (applicants ref. T9) - Remove significant Deadwood. If the client desires this could remain in situ as habitat. 1 x Hornbeam (applicants ref. T11) - Remove significant Deadwood and monitor closely at next survey. 1 x Oak (applicants ref. T12) - Remove significant dead wood. 1 x Holly (applicants ref. T15) - Fell to ground level. 1 x Oak (applicants ref. T22) - Remove significant dead wood overhanging the foot path. 1 x Oak (applicants ref. T26) - Remove significant Deadwood over footpath. 1 x Oak (applicants ref. T28) - Fell to ground level. 1 x Hawthorn (applicants ref. T29) - Fell to ground level. 1 x Hornbeam (applicants ref. T33) - Fell to a height of 5 m and leave remaining for habitat. 1 x Holly (applicants ref. T41) - Fell to ground level. 1 x Hornbeam (applicants ref. T43) - Crown reduce by 4 m back to good viable growth points. 1 x Hornbeam (applicants ref. T45) - Fell to the height of the adjacent yew hedge and retain as habitat 1 x Hawthorn (applicants ref. T50) - Remove fallen tree. 1 x Oak (applicants ref. T52) - Remove all Deadwood over 2.5 cm diameter.