10 Beeches Wood Kingswood Surrey KT20 6PR
Beech (rear garden LHS) - Reduce the lateral spread of the Northern canopy (towards house) by up to 2m, back to previous points of reduction, blending into existing upper canopy. Crown lift to provide 6m clearance from ground level. Remove all major deadwood over 25mm diameter.2m lateral reduction N canopy only. Pre works 23x19m, Post works 23x17m. Oak (rear garden LHS) - Crown Lift to provide 5m clearance from ground level by removing the established epicormic growth from the trunk, up to the main crown break union. Crown lift by removing established epicormic. No change in canopy dimensions. Scots Pine (rear garden RHS) - Remove split and hanging branch from canopy. Tidy up any additional damaged branches and remove all major deadwood over 25mm diameter. Use lowering blocks and lines as appropriate to enable a controlled descent. Removal of split and hanging limb. 5 day notice will suffice. Beech (rear garden RHS) - Reduce the lower lateral spread of the tree by up to 3.5m, to fall in-line with the existing upper canopy. Remove all major deadwood over 25mm diameter. Lower lateral reduction to balance and verbal canopy. Pre works 25x18.5m, post works 25x15m. Beech (rear garden RHS, closest house) Reduce the height/length of the protruding branches in the upper North-West canopy by no more than 2.5m, to fall in-line with the remaining upper canopy. Reduce lateral spread of the North and East canopy extents by up to 3m, blending into remaining existing canopy. Crown lift to provide 6m ground clearance from ground level. Remove all major deadwood over 25mm diameter. 3m lateral reduction N/NE canopy only. 2.5m reduction of selective protruding branch(es) in upper NW canopy to balance crown. Pre works 30x18.5m, post works 30x15.5m