Planning Application Details

Listed building application - change two aluminium sliding doors to three aluminium sliding doors on rear elevation, change approved rooflight to a velux GGL 3570H conservation pine laminated centre pivot roof window, align patio wall, aluminium clad to chimney and changes to approved static door on rear elevation of previously approved DC/20/0979/LB for a. demolish external walls to rear lean-to b. remove section of half height wall between kitchen and breakfast room c. remove modern timber studs and plate, remove timber head beam and break out modern brick plinth d. remove existing render/plaster from walls for new extension e. remove window to en-suite and block up to match existing wall construction f. remove existing modern timber beam and replace with steel beam between kitchen and breakfast room g. form flat roof structure to extension h. install new timber framed partition at first floor level, new doorway with architraves to match existing and fit new boarded and ledged door with ironmongery to match existing i. install roof light to kitchen roof and existing en-suite j. install pipework to connect kitchenette to existing SVP and foul drainage within existing bathroom k. install a new down pipe to the south elevation j. install underfloor heating to bathrooms at 1st floor l. install kitchen extract, reposition ventilation duct work and extract vent to en-suite and re-direct extract vent through tile vent in lean-to roof of ground floor bathroom m. remove external render and all associated modern substrates and replace with new substrate and lime render n. remove plasterboard ceilings to rooms within the historic core of building at ground and first floor level o. repair ceiling joists as required and infill soffits between joists with lime plaster with limewash or breathable paint finish, repairing and reinstating lathing p. remove existing modern first floor windows from rear elevation and replace with new timber casement windows