Sandalwood Drive Wigan
Working Amendment application for previously approved application A/19/88109/RMMJLA - Arrangement for external paving around Extra Care building updated, moving the paving closer to the building, omitting apartment patios and intermediate planting. Boundary treatment type 6, 7 and 8 added; Brick piers added to brick boundary walls. Boundary treatment amended for plots 6, 7, 13, 14 and 18 and the section between the external compound and site boundary. Re-location of solid timber fence from the front of the sub-station to the rear to exclude sub-station from compound. Brick wall to adjacent path extended vertically to act as guarding
Northern Part Of Bridgewater Business Park West Bridgewater Street Leigh
Working Amendment application for previously approved application A/19/86515/RMMAJ - To remove Plots 1-3 1m away from the boundary. Noise Report: Revised Report relating the St Helens Road only (Plots 1-3 / Apartments 4-27 / Plots 28-31)
Open Land Longridge Avenue Standish
Working Amendment application for previously approved application A/20/88976/FULL - The full height windows at ground floor on the rear elevation are to be replaced with half height windows as indicated on the proposed elevations. Air source heat pump units are to be installed beneath cill level to supply each of the 4no. apartments. The air source heat pump installation will comply wih the Microgeneration Certification Scheme Planning Standards (MCS 020); the volume of the outdoor compressor unit will be below 0.6 cubic metres and all parts of the unit will be sited more that 1m from the boundary.
Land Between 84 And 76-78 Almond Brook Road Standish Wigan WN6 0TA
Working Amendment application for previously approved application A/20/89561/LA - The full height windows at ground floor on the rear elevation are to be replaced with half height windows as indicated on the proposed elevations. Air source heat pump units are to be installed beneath cill level to supply each of the 4no. apartments. The air source heat pump installation will comply with the Microgeneration Certification Scheme Planning Standards (MCS 020); the volume of the outdoor compressor unit will be below 0.6 cubic metres and all parts of the unit will be sited more than 1m from the boundary.