T1; Ash Tree, The tree is in extremely poor condition. Large cavity above the major union half way up the tree. Previously covered by Ivy. Over hanging neighbouring property boundary lines. Fell Tree to prevent failure in the near future. 6. Tree

Tree works

T1 Sycamore; Crown reduce by approximately 3.0-3.5 metres in height and laterally to balance pruning to suitable growth points to retain the flowing lines of the canopy. Remove stem suckers and branches indicated. T2 Sycamore; Section fell as close to ground level as possible. T3, T4, T5 & T6 Sycamore; Section fell as close to ground level as possible. T7 Sycamore; Section fell as close to ground level as possible. Works as agreed with Peter Canovan during site meeting.

T1 & T2 Ash; Crown reduce by up to 2.0 metres laterally on southern side to rebalance pruning to suitable growth points to retain the flowing lines of the canopy. Thin branch endings by 15%.

T1 - Willow tree too large for its location reduce by 5 meters

Ash Tree (T1) Reduce canopy by 2-3m to increase the distance from the property. Balancing the crown to ensure the tree continues to grow with good form into the future. Works are requested due to a limb failing and damaging the chimney of the property over the Christmas period. We will also be undertaking a full deadwood of the canopy also. (T2) I am unsure if the Holly trees x2 are under any form of TPO or Conservation area cover but if they are then I would like to inform that we would like to reduce the canopy of the Hollies to improve form in an effort to improve their physical appearance. Reduce by 1-1.5m and crown lift to allow better access beneath.

T1 Horse Chestnut - Prune to remove tertiary lateral branches that overhang the boundary fence and parking area. Prune back to viable branch unions or back to secondary branch retaining the branch collar and branch bark ridge working to BS:3998 T2 Horse Chestnut - Remove large secondary branch overhanging the boundary and parking area. Prune back to branch collar/branch bark ridge keeping intact branch collar working to BS:3998 T3 Horse Chestnut - Pruning of small tertiary branches that overhang the boundary fence and parking area. Prune back to viable branch unions or back to secondary branch retaining the branch collar and branch bark ridge working to BS:3998 T4 Horse Chestnut - Remove large secondary branch that overhangs the boundary fence and parking area. Prune back to branch collar/branch bark ridge keeping intact branch collar working to BS:3998 All pruning to manage the excessive overhang and help improve light and space while reducing tree debris falling on cars and driveways. Due to the nature of the nuisance that trees are causing I don't think branch extension reductions on the overhanging limbs would be beneficial as this will cause additional regrowth to branches that are already causing a nuisance. Therefore I have recommended whole branch removal to limit regrowth within the vicinity of the branch removed.

T1788 Lombardy Poplar; Fell to ground level. T1974 Ash; Crown reduce by 25% laterally, equating to a reduction in branch length of 3.0 - 4.0 metres. Works to be carried out as per the BHA decay test dated 20th November 2020.

T1 - Prunus Cerasifera - Dead Fell, T2 - Prunus Cerasifera - Dead Fell, T3 - Prunus Cerasifera - Dead Fell , T4 - Prunus Cerasifera - Dead Fell, T5 - Prunus Cerasifera - Reduce West limb by 2.5m to re-balance the tree, T6 - Betula Pendula - Reduce height by 25% T7 - Betula Pendula - Reduce height by 25%, T8 - Betula Pendula - Reduce height by 25%, T9 - Betula Pendula - Internal decay - Fell T10 - Betula Pendula - Reduce height by 25%, T11 - Betula Pendula - Reduce crown by 25%, T12 - Betula Pendula - Reduce crown by 25%, T13 - Betula Pendula - Savere lean towards house, rootplate movement - Fell

trees on Spey Close T1,T2 and T3 Lime trees to be reduced