TPO Application for 1 x Hazel (T1) - Reduce tree back to fence line pruning back by 2m retaining a canopy width of approximately 3.5m (as shown on photo), 1 x Ash (T4) - Fell tree due to excessive shading and 1 x Ash (T5) - Crown-lift tree over garden to a height of 6m.

TPO Application - Hornbeam (T1)- Fell because tree leaning significantly towards the property Ash (T2)- fell because tree is showing significant movement in the root plate during high winds Hornbeam (T3)- side prune back to the boundary fence to suitable growth points due to excessive shading Hornbeam x 3 (G4)- side prune back to the boundary fence to suitable growth points due to excessive shading Ash (T5)- fell, tree is leaning significantly, due to movement in root plate

TPO Application - T1 Silver Birch - Reduce crown by approximately 3m, currently approximately 10m tall to be reduced to around 7m. Reason: To allow for more light into garden. T2 Leylandii (In No.17s garden, overhanging No.18s drive) - Fell to ground level. Reason: To allow for more light into the garden and to prevent the risk of damaging the fence.

TPO Application for a (T1) row of 7no Field Maple trees along rear boundary and the right hand tree on other side of fence. Reduce back lateral growth by approx 1m to suitable growth points. Reduce the heights of the trees by up to 4m and to shape.

TPO application to trim one Conifer to final height of 4m, spread of 3m; Crown Reduce one Mulberry reducing the height to 4m and spread to 3m; Fell dead Sorbus stems; Lightly reduce one Acer to height of 6m, width of 2.5m; Reduce height of one Spruce to 10m; Prune canopies of nine Oaks back 3m out from fence line into owners garden; Reduce one Holly to height of 5m, spread of 3m, and trim hard all round; Remove dead top of one English Oak and 2no. broken and suspended branches. Remove to lower branches over hanging decking area as detailed in photo; Trim four Hollies hard all round - Front back hard overhang over decking area - to final height of 5m, and spread of 6m.

TPO Application - All three trees are mature oak trees. (T1) - Adjacent to footpath. We wish to remove all side branches (totem pole the tree) and allow it to recover and probably re-sprout new side growth. Reason: Tree keeps dropping branches and has caused damage to school fence, suspected root damage/tree is stressed and is now dropping branches. (T2 and 3) Both trees have a noticeable lean in the direction of the buildings. Should they fall they would damage the neighbour's buildings. We have monitored the trees since 2014 and now wish to remove the larger branches on the lean side of the two trees to reduce the gravitational 'pull' of these larger branches and allow the trees to grow away from the direction of the lean. Thus helping to reduce the likely hood of any collapse of the tree onto the buildings.

TPO Application for 4 x Oak trees to cut back the overhanging branches of the boundary fence as shown in photos.

TPO Application for the Ash trees - cut back the over hang into 7 Exton garden back to the boundary fence.

TPO application to cut back mixed trees of horse chestnut and lime branches growing through the fencing to a height of 3 meters and back to the fence line due to overhanging onto footpath, as identified within the site plan/photographs enclosed.

Group of Mixed Broad leaves (G1)- Side prune trees back to fence line, up to a height of 5m. Pruning secondary branches only and back to suitable growth points. Reason: To improve light to the property.