G1 - Hazel, Holm Oak, YewPrune lateral growth back to 0.5 metres behind driveway edge. T2 - Cedar Reduce length of all branches by 1 metre ensuring natural shape and balance typical of species is maintained where possible. G3 - Holly, Laurel Lift to 2.5 metres over garden and prune back from house side by up to 1 metre. Lift over public footpath to 2.5 metres from ground level. T4 - Cedar Reduce low canopy over garden and neighbours garden back by 2 metres in branch length. Reduce section of upper crown over rear of house back by 1.5 metres.

T1, Oak To shorten Westerly limb with longitudinal seam (possible internal crack) by 6m in length, back to suitable secondary growing points. To shorten Southern branch ends towards the summer house by 2m and balance. Reasons Branch broke out and damaged house roof. Parent stem faulty with longitudinal seam, decay and possible internal crack.

Beech (rear garden LHS) - Reduce the lateral spread of the Northern canopy (towards house) by up to 2m, back to previous points of reduction, blending into existing upper canopy. Crown lift to provide 6m clearance from ground level. Remove all major deadwood over 25mm diameter.2m lateral reduction N canopy only. Pre works 23x19m, Post works 23x17m. Oak (rear garden LHS) - Crown Lift to provide 5m clearance from ground level by removing the established epicormic growth from the trunk, up to the main crown break union. Crown lift by removing established epicormic. No change in canopy dimensions. Scots Pine (rear garden RHS) - Remove split and hanging branch from canopy. Tidy up any additional damaged branches and remove all major deadwood over 25mm diameter. Use lowering blocks and lines as appropriate to enable a controlled descent. Removal of split and hanging limb. 5 day notice will suffice. Beech (rear garden RHS) - Reduce the lower lateral spread of the tree by up to 3.5m, to fall in-line with the existing upper canopy. Remove all major deadwood over 25mm diameter. Lower lateral reduction to balance and verbal canopy. Pre works 25x18.5m, post works 25x15m. Beech (rear garden RHS, closest house) Reduce the height/length of the protruding branches in the upper North-West canopy by no more than 2.5m, to fall in-line with the remaining upper canopy. Reduce lateral spread of the North and East canopy extents by up to 3m, blending into remaining existing canopy. Crown lift to provide 6m ground clearance from ground level. Remove all major deadwood over 25mm diameter. 3m lateral reduction N/NE canopy only. 2.5m reduction of selective protruding branch(es) in upper NW canopy to balance crown. Pre works 30x18.5m, post works 30x15.5m

T1. Cedar front garden RHS - Remove major deadwood greater than 25mm diameter and reduce the canopy to the NE round to the SE aspect by up to 1.5 metres to clear the house.20x16 down to 20x14.5 works to clear adjacent building (TPO)

(T1) Beech tree- reduce side (lateral) branches overhanging boundary of newton house by 1.5-2m to a height of 10m and 1m to a height of 15m shaping into upper crown (no height reduction) Raise crown to 5m To allow more light into property as is now very close to house and blocks a lot of light

T1 Beech Work Spec: Reduce back overhang to Seymour House by 2-3m to bring in line with other Beech trees. Reasons: Reduce debris falling on property. Increase light.

MODIFIED SPECIFICATION FOR THINNING SEE CONDITION 2 T1. 1x English Oak tree located in the front garden of 2 Warren lodge. Crown thin by 20% and remove major deadwood. Remove epicormic growth on the main stems up to a height of 5-6 metres. Reduce selective lateral branches in by 1-1.5 metres to give a better shape, also reduce back from the house by 1-1.5 metres to suitable secondary growth points to reduce the amount acorn litter on the house roof. (see photos attached with areas to be reduce back clearly marked in red.) The objective of this work is to provide more light into the property of 2 Warren lodge, reduce the amount of acorn litter on the house roof and to give the tree better aesthetics.

T1 Oak- Crown lift to height of 7m back to source, prune lateral branches growing towards house by 2m. Tree is mature specimen and is causing excessive shading. Crown lift will increase light spill. This crown lift will match pruning works carried out at 11 Jennings way to increase light spill. T2 Ash- Crown lift to height of 7m back to source, prune lateral branches growing towards house by 2m. Tree is mature specimen and is causing excessive shading. Crown lift will increase light spill. This crown lift will match pruning works carried out at 11 Jennings Way to increase light spill. T3 Hornbeam- Remove limb that is damaging fence and growing towards neighbours property. Reduce remaining crown by 2m maintaining natural shape. Limb is growing excessively over neighbours property and causing damage to fence.

T2 Oak - To remove deadwood (exempt) and remove two lowest limbs overhanging the summer house of 1 Deepfields. Client has had a few small branches fall recently as limbs are etiolated. To prevent limbs failing in the future and causing damage to the summerhouse.

T1. Hornbeam tag no. 386 - Remove major deadwood greater than 20mm in diameter, prune to clear street lamp by up to 1 metre, prune to clear building by 2 metres and raise crown over road to provide 5 metres clearance from ground level. T2. Hornbeam tag no. 387 - Remove major deadwood greater than 20mm in diameter and raise crown over road to provide 5 metres clearance from ground level Both trees roughly 15x13m works to clear neighbouring house and provide adequate clearance over the road