T1. Oak. Reduce the height by 1m and the lateral spread by 1.5m. Prune out any rubbing and crossing branches. T2. Beech. Reduce the height by 0.75m and the lateral spread by 1m. Prune out any rubbing and crossing branches. T3. Oak. Re-pollard at the original pollard points due to the proximity to two houses.

AMENDED SPECIFICATION SEE CONDITION 2 : T1: Pine: Action= Fell: Reason= No retention value. Leaning is over pronounced. T2: Beech: Action= Reduce height by 2 M . Reduce laterals by 2M : Reason= containment of over-large tree in position by home.

AMENDED SPECIFICATION SEE CONDITION 2 T1 and T2 Sweet Chestnut Actions: Crown reduction of 2-3m back to previous points Thin out crown by 15-20% Remove trunk suckers. Reasons: To allow more light into garden, and reduce domineering effect of the two trees.

T1 Oak (Dead) - This tree is dead and requires felling in the interest of Health and Safety management. T2 Ash - Reduce in outside dimensions by 1.5m back to previous points in the interest of Health and Safety management.

T001 Yew - Crown lift to 6 m over neighbouring side to clear BT cable and improve light ingress, crown lift to 3 m on owner's side to improve light ingress. T002 Sycamore - Crown lift to 6 m on neighbouring side to improve light ingress. T006 Sycamore - remove tree due to direct damage to the boundary wall. Replant same species in same area, winter 23/24. T007 Hazel - Crown lift to 6 m on neighbouring side to improve light ingress. T008 Sycamore - Crown lift to 6 m to improve light ingress. T009 Beech - Remove tree due to excessive stem decay. Replant same species in same area, winter 23/24. T010 Hazel - Crown lift to 3 m on neighbouring side to improve light ingress. T011 Ash - remove tree due to ash die back disease. Replant with Sycamore species in same area, winter 23/24. T012 Ash - remove tree as it?s dead. Replant with Sycamore species in same area, winter 23/24. T014 Hawthorn - Crown lift to 3 m for pedestrian clearance. T017 Sycamore - remove tree due to direct damage to fence post. Replant same species in same area, winter 23/24. Photographs contained within Tree Condition Survey Report dated 26th September 2023

T1 Oak Tree - Tip prune to reduce the height and spread by 1.5m. This is to control the size of the tree. T2 Beech tree - Tip prune to reduce the crown by 0.5m.

(T1) Beech tree- reduce crown by 2m all over leaving at a height of 16m and width of 12m. To allow more light into property and to keep in check as very close to house

T001 Holm Oak growing in front of house - Crown reduce by around 2 metres overall to leave an approximately 8 to 9 metre high tree. This is to ensure foliage is clear of the building and to maintain the tree at a manageable size, consistent with good arboricultural practice.

Sweet Chestnut (T1) - Crown reduce by approximately 2 - 2.5m. Remove epicormic growth from main stem to approximately 5m above ground level. Sweet Chestnut (G2) - Five Sweet Chestnuts in rear garden. Repollard at previous pollard points removing approximately 2 - 2.5m of regrowth. Remove epicormic growth from main stem to approximately 5m above ground level.

G1 - 3 x medium sycamore: Reduce the crown height and width by approx 1-1.5 metres back to the previous reduction points as before. Current Crown height is approx 9 metres & width is approx 3-5 metres. T1 - 1 x large sycamore: Reduce the crown height and width by approx 1-1.5 metres back to the previous reduction points as before. Current Crown height is approx 14 metres & width is approx 10 metres. G2 - 2 x Ash Trees: Reduce the crown height and width by approx 1-1.5 metres back to the previous reduction points as before. Current Crown height is approx 9 metres & width is approx 3-5 metres. Reasons for all tree works are to generate light into the property