TPO 275 T8 - Copper Beech Remove 3 lower limbs as per photo and as discussed with Tree Officer

T18 Horse Chestnut - Selective reduction of T18. Reduce storm damaged branches and those containing significant cavities by 10% of branch length. Reduce crown height by 15 % whilst retaining all lower internal growth. Reduction cuts to be made back to a suitable side branch that maintains a flowing branch line and character of the tree. This will allow the tree and habitats to be retained and will reduce wind loading on the trunk whilst not overly exposing the adjacent trees to significant increased wind loading. This will allow the tree to be retained in the short term and provide a safe, phased, decline pathway.

Tree works to be carried out as per JJH Arboriculture tree survey and inspection report.

Recommendations following Tree assessment: Deodar Cedar: Selective crown and branch reduction. Crown - small reduction of selective branches as shown by red dots on Pic 1. South side - cut back low primary scaffold branch by 2.5m to strong green secondary growth to reduce weight on this extended limb as per red dots on Pic2. North/West - reduce extended branches by nor more than 1.6m to clear lamp posts as per red marks on Pic4. East - prune back extended growth over drive by nore more than 1m to strong green suitable secondary growth, all an an on-going maintenance and care programme. The tree shows signs of normal vitality with no visible or notable dysfunction. The work is being undertaken to balance the tree, and to reduce nuisance from falling branches and bird droppings over public footpaths and private driveways.

3 Horse Chestnut trees at the eastern end of a row of 7 identified as G1 on the Tree Protection Order TBC/TR/92. The trees overhang the rear garden of No.8, The Close and are situated adjacent to the North-East boundary on land belonging to Southam End Cottage. Works requested: to crown raise the 3 trees to a height of 6-7 metres from ground level to prevent damage to the roof of a garden room, to prevent injury from falling debris in a seating area and reduce excessive shading.

To reduce trees T3, T4 - Lime and T5, T6 - London Plane back to previous points at the Grange ( see map attached)

TPO 249 Recommended works following tree inspection - Pollard tree back to original pollard height, prune two lower branches as shown in submitted photos.

TPO 275 - T11 (Shown as T29 on TPO) & T12 (Shown as T30 on TPO) - 2 limes reduce back to previous Reduction/pollard points between 8-10m T10 (shown as T31 on TPO) - 1 Sycamore pollard at previous pollard point between 8-10m. 2 days with minimum 25m MEWP. Reason for work cyclical pruning.

The tree that we would like to carry work out on is the Magnolia Tree identified on the attached plan as T2 and also noted as T2 in the Tewkesbury Council Tree Preservation Order No. 313 Reduce branch back to an appropriate point as it is damaging gate and touching glass on the kitchchen window which may break. See photographs accompanying the application which explains the issues and proposed works.

TPO 275 - T9, T10 and T11 T9:-mature ash tree adjacent to the garage and driveway,all over reduction back to the previous points, approximately 3metres. T10:- mature ash tree in the garden area,stem bifurcates at 1-2.5 metres with poor attachment,no natural bracing. Dieback at extremities of the crown,suspect ash dieback infection, deadwood and stubs throughout the crown, overall condition is poor with no low growth points for reduction,fell to ground level T11:-English oak, overall condition and vitality are good.reduce back to previous points by approximately 3metres all round to prevent failure of branch attachments. Would recommend repeating this every 5 years