Remove young branches within 1000mm of house roof to stop growing into tiles and gutters x 1 Magnolia tree (A), remove as growing through staircase to allow staircase to be rebuilt x 1 Ewe tree (B)

Prune back 2-3 metres near boundary due to branches causing damage to roof tiles x 1 Lime (T1)

Crown thin by 10% to achieve a more uniform lighter crown density and minor tip reduction on lower growth extended towards house roof of around 1 metre to improve crown balance, work is designed to create a more even crown density x 1 Copper Beech (T1)

Reduce branches on the western side of the tree by a maximum 3m and these branches should be reduced in proportion (higher branches being reduced less) to a maximum height of 10m to reduce likelihood of damage to roof x 1 Sycamore (T1)

Crown reduction of approx. 2.0 -3.0m to clear branches from near roof x 3 Beech (T1 - T3), prune back overhang by 2.5 metres to create more light x 1 Beech (T4), x 1 Oak Tree (T5) and x 1 Willow Tree (T6)

Prune branches to 1 x Beech (T1) to clear the apex of the garage roof by 1-2 metres

Crown reduce 5 x Beech by approx. 1.0 - 1.5 metres to clear the branches from near the roof

Crown thin by 15% and raise lower branches to 4 -5 metres to Beech group (G2) to improve light and air penetration through crown and to improve clearance over road and drive, reduce crown spread by approx. 2 -3 metres to Oak (T1) to provide at least 3 meters clearance to roof

Crown lift to approximately 5-6 metres including the stems cleared of epicormic growth to Limes and Horse Chestnuts (T1 to T6) and Crown lift with side lateral reduction of the branch length away from the roof area and flank wall back to a suitable branch union not exceeding 2 metres Lime (T7)

Remove lowest limb back to stem of 1 x Cherry (T1) to increase the clearance over the garage roof and reduce crown spread by approx. 1.5-2.5 metres to improve the clearance over the garden and maintain size and prune back to secondary and tertiary points to 1 x Oak (T2)