T1Cupressus macrocarpa - crown reduction by 1 - 1.5m to a final height of 9.5m and spread to 6m. T2 Cupressus macrocarpa - prune back the lower and mid canopy, up to a height of 6m above ground level on the southern sector of the crown, by up to 1m. T3 Horse chestnut - prune to give up to 1.5m clearance over the shed and carefully sever ivy at the base of the tree. T4 Maple - branch lift to give up to 4m clearance directly over the neighbours driveway at 12 Illingworth. T5 Silver Birch - branch lift to give up to 4m clearance directly over the driveway. T6 Leyland cypress - fell. S1 - Portuguese Laurel (1 Brudenell) - Cut back to hedge line (005/1960/TPO).

T1 Hornbeam Crown Lift to provide 4m clearance from ground level, G1 Hornbeam Crown Lift to provide 2.5m clearance from shed roof, T2 Oak Crown Reduction - Reducing the height and spread of the tree by up to 2-3m, T3 Oak Crown Reduction - Reducing the height and spread of the tree by up to 2m and remove deadwood, T4 Silver birch Crown Reduction - Reducing the height and spread of the tree by up to 2m, Works to maintain trees size, and to increase light into the woodland understory. (TPO1/1971)

G1- 2x Crab Apple- reduce in height and width by 1.5 meters, crown lift over shed by removing 1 meter. T2- Prunus- reduce and shape by removing 1 meter. To maintain these trees in their current location.

T1 - Removal of 2 Damson trees to hedge height as both trees are severely leaning over neighbours path (4 Main Street). T2 - 1 Ash tree - reduction of tree to below overhanging branch as tree grows sideways/down over neighbours shed. T3 - 1 Ash tree (3 trunks) - crown reduction back to main trunks T4 - 3 Ash trees - crown reduction (roughly 33%) to reduce height and encourage shape T5 - 1 Ash tree - crown lift to reduce weight in tree canopy T6 - 1 Ash tree - remove tree as conflicting with main ash tree next to it T7 - 1 Ash tree - crown lift (roughly 25-33%) Works to be carried out by DTC Forestry Ltd

Works to oak tree covered by LBE ORDER NO 66 1977:- crown thin by 20%, lift crown to 4m from ground level without removing any scaffold limbs and reduce low extraneous lateral growth towards the neighbouring gardens shed and fence line by up to 1.5m if required to balance the crown lift.

Remove a dead hawthorn tree that partially collapsed into nearby trees and is overhanging the rear garden of 5 Briar Mead. In addition clear over hanging branches up to 2.5 metres from ground level that are overhanging the fence line to allow the installation of a new boundary fence and to protect the roof of the garden shed that sits underneath the trees as the felt is being ripped and damaged.

Trees T1, T3, T4 & T5 - Crown Lift to achieve a maximum clearance over the garden area and/or parking spaces of 3metres between the branch tips and the surrounding surface. No pruning wounds greater than 80mm in diameter to be generated as a result of the works. Crown Reduce tree canopies on the adjacent building sides only to achieve a maximum clearance of 2metres between the branch tips and the adjacent building structure. No pruning wounds greater than 80mm in diameter to be generated as a result of the works. Additional - Tree T1 Silver Pendant Lime - Prune back branches to create 2m of clearance from the telecoms cables. Tree T2 Silver Pendant Lime - Crown lift to a height of 3m to provide clearance over the car parking area. Tree T3 Copper Beech - Remove broken branch from lower crown. Tree T6 Copper Beech - Crown lift over the stable building and shed to provide 2m of clearance between the branch tips and the adjacent building structure - No pruning wounds greater than 80mm in diameter to be generated as a result of the works.

Works to TPO trees: Rear of Car Park - Bay No.7 T1 - Ash in Decline Fell to ground level and remove hanging limb from adjacent Sycamore. - The tree is located on the front boundary to the rear of parking bay No7 - The tree is in decline due to Ash Dieback and has shed a limb which is hung up in the adjacent Sycamore Tree ? T4 - Due to Ash Dieback the tree has not long term future - Risk of further limb or branch shedding or complete failure if retained - Replacement panting has been agreed. Rear of Car Park - Bays No. 8 & 9 T2 - Dead Poplar Fell as close to ground level as possible. - The tree is located on the front boundary to the rear of parking bay?s No?s 8 & 9 - The tree is dead and risk of branch or limb shedding or complete failure if retained - Replacement tree has been agreed Side of Car Park - Bay No.11 T3 - Leaning Sycamore in Decline Fell as close to ground level as possible. - The tree is located on the front boundary to the side of bay No7 - The upper crown is completely dead - The tree is leaning towards parking bays - The tree is at risk of branch or limb shedding or complete failure if retained - Replacement tree has been agreed Right Hand Side of Car Park Bay No.7 T4 - Sycamore Remove major dead wood. Client to monitor. - The tree is located to the left hand side boundary line - Removal of deadwood - exempt works

T1 - Horse Chestnut - crown raise over shed to clear 1.5m.

(T1) Pear: crown reduction to most recent points by 30% reshape and crown thin by 25%. Height from 7.5m to 5.3m. Radial spread from 6.0m to 4.2m. Routine maintenance (T2) Corkscrew willow: crown reduction to previous points by 30% and reshape Height from 7.8m to 5.5m Radial spread from 4.5m to 3.2m Routine maintenance (T3) Corkscrew willow: fell to ground level Height 3.0m Radial spread 1.5m Self-seeded, very close to shed and brick wall, depriving other plants of light