4 x Sycamore trees - Crown reduction to achieve clearance from property at 16 The Boundary of 10m due to excessive shading, over reaching property, external garage, fence/property, damage to fence due to branch falling and crown lift to 10m

Oak T1: trim 2m away from garage as it is touching Oak T2: trim 3 metres away from the boundary Oak T3: trim3 metres away from the boundary on oak tree up to 6m high

T1 Common Lime - Tree is leaning heavily towards the rear of neighbouring properties - Reduce down to union at approximately 25ft to reduce sail affect. T2 Horse Chesnut - Post Mature - Tree is showing decline with large dead branches over hanging neighbouring garden and garage (This tree is on the boundary) Fell/Remove (replant away from boundary)

T1 Beech (approximately 17m in height) in front garden - Reduce length of lower lateral branch extending over garage of No. 38 back to near boundary to a suitable union (one cut approximately 250-300mm). Reduce branches on the south-east side of tree by approximately 3-4m and remove similar amounts at the top (numerous cuts approximately 50-75mm). Reduce branches on the west side by 1m (one cut approximately 50mm). SUBJECT TO TPO 2760 (22.12.2021)

Oak tree on the boundary . Our neighbour( 52 Motcombe Road) has asked for this application to fell the tree. Neighbour has complained that the root is causing lifting of one slab and cracking of another slab on a drive leading up to a stand alone detached garage. There is no damage to the main drive or the foundation of the garage. Their concern is for damage that may occur in the future. They have provided a report which suggests either felling of the tree or root reduction by trimming ( we have spoken to several tree surgeons who have refused to do any work on the roots as this could affect the future stability of the tree). TPO#: T2 - 31W

Poplar T1 - 18m tall, 18m spread. Retrenchment prune by up to 4m all over to suitable growth points to result in a tree 14m tall and 10m spread. Tree has thrown several large limbs in recent years. Heavy pruning is required to reduce weight on the remaining limbs to help prevent further limb loss. Beech T2 - Reduce over extended laterals all over by up to 3m (to suitable growth points) to bring them in line with the main canopy. Works to reduce the encroachment towards the house and balance the canopy thereafter. Overall size of the main canopy will be unaffected. Chestnut T3 - 16m tall 16m spread. Re pollard to previous points. Tree has previously been pollarded. With pollard re growth being notoriously weak and regrowth encroaching on the house and garage, the tree requires re pollarding to remove the risk or regrowth failing and to allow regeneration at the previous points resulting in a tree roughly 8m tall and 8m spread. Pine T4 - Fell. Tree has moderate lean and is weighted into the lean. Historic excavations could have damaged the root structure further contributing to the lean over time and the path below is lifting which could indicate root heave. Tree has little protection from winds with a moderate target zone. Conifers TG1 - Re top to previously topped height (approximately 8m). Hornbeam TG2 - Reduce 3x hornbeam in height by up to 3m to suitable growth points (from 20m to 17m tall) to manage their size given their location along the boundary. To fell a 4th smaller hornbeam that has a lean due to suppression by the 3 larger trees.