T1: Horse Chestnut - Crown reduce by up to 3m to previous pruning points. Crown thin 15% to reduce the risk of branch failure at previous reduction points. T2: Silver Birch - Crown reduce over extended lateral branches in top of crown by up to 3m. Reduce lateral branches by up to 1m to reshape. Crown thin 15%, risk management enabling the retention of this tree in a stable form. to allow more light into adjacent property.

Yard Area - Right Hand Side. T1 - Ash, Fell as close to ground level as possible. Works to be carried out with the use of a MEWP. Due to the cavity in dominant leader at a height of approximately 3.5 metres from ground level - cut and stack all logs. The tree is located to the front of the stables to the right hand side of the yard area. There is a large cavity at a height of approximately 3.5m from ground level and approximately 0.2 - 0.5m above the main crown break within the dominant stem which over hangs the stable building roof . Due to the size of the cavity the tree would require significant reduction to stabilize which would also include the adjacent dominant stem to balance leaving a Monolith trunk and removing all amenity and aesthetics value . This is a high load bearing limb with risk of complete failure if retained leading to significant damage to the stables building . The tree appears to becoming slightly stag headed which could be early signs of Ash Dieback

SEE CONDITION 2 FOR APPROVED WORKS .1 Lime LHS of drive Decay around historic reduction points. Crown Reduction - Reducing the height of the tree by up to 4 metres and laterally by up to 2 metres. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth. 20x8m down to 16x6m

1 Yew LHS Crown Reduction - Reducing the height and spread of the tree by up to 1 metre. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth 8m x 6m to 7m x 5m Works to allow light into flats

1 Yew rear garden : Crown Reduction - Reducing the height and spread of the tree by up to half a metre. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth. 3 Yew x 2 rear garden LHS : Laterally reduce by 1 metre to clear building and reduce protruding branches as pictured by 3 metres to match remainder. 4 Holly LHS of house : Reduce laterally by 2 metres. To allow light in to garden and to clear building. Stop squirrels entering the roof. 1- 8 x 5 down to 7.5 x 4.5. 2- 12 x 6 down to 12 x 5. 3 - 12 x 7 down to 12 x 5

AMENDED PRUNING SPECIFICATION SEE CONDITION 2 AND INFORMATIVE 2 FOR APPROVED WORKS AND GENERAL GUIDANCE. 1 Sycamore x 6 rear garden Crown Reduction - Reducing the height of the tree by up to 4 metres and lateral spread over garden by up to 3 metres. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth Approx 12m x 7m to 8m x 4m to allow light into garden and house. 2 Hawthorn rear bounday Tree slightly up rooted leaning over garden, reduce 2 stems by up to 5 metres to stabilise tree Approx 9m tall however angled - limb reduction to prevent tree falling - client wanted to keep for screening

1 English Oak Crown Reduction - Reducing the height and spread of the tree by up to 2 metres. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth Height pre works 23m post works 21m. Crown spread pre works 16m post works 14m 2 English Oak Crown Reduction - Reducing the height and spread of the tree by up to 2 metres. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth Height pre works 23m post works 21m Crown spread pre 8m post works 6m Works required to allow more light into garden and property and cut away from building.

1Beech #000368 Crown Reduction - Reducing the height and spread of the tree by up to 2 metres. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth (16M X 10M TO 14M X 8M) Cutting back from building

Beech rear garden- Crown Reduction - Reducing the height and spread of the tree by up to 1 - 1.5 metre. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth (Approx 14m x 12m to 12.5m x 10.5m) To reduce back and allow light.

SEE CONDITION 2 FOR APPROVED WORKS. Beech LHS of house. Crown Lift to provide 5 metres clearance from ground level all round by removal of secondary branches and reduce the northern canopy by up to 2 metres to clear building. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth. Works to reduce from building and raise above driveway and garages.