G1 - Woodland Tree Line - Located on boundary, to rear/side of No. 64 Boundary Way. Consisting of 2x Mature Sycamore shown as T1 & T2, located close to the boundary line, with considerable overhang to property and garden area of no.64. Reduce overhanging laterals to reduce overextended limbs of Sycamore tree by 4.5M. Remove or carry our end-weight reduction to lower limbs in close proximity to house roof line, to provide suitable crown clearance from roofline of property block. To alleviate crown encroachment and light filter issues to property and garden, while reducing end weight to crown, reducing risk of limb failure to over extended limbs. Fell X1 Self-set Sycamore T3, located close to fence boundary. height approx 6/7m Fell and remove due to low value and poor siting growing under established trees. Further crown growth will likely cause continual conflict to adj property and boundary.

Tree number - G1 Tree type - x3 Lime (Tilia cordata) and x1 Sycamore (Acer psuedoplatanus) Approx Height - 20m Location - in rear garden of property Clearburn left hand boundary which overhangs clients Rear garden Right hand boundary beside house Service - Prune Work required- prune back the growth over the client's property to provide a clearance of approximately 3m Reason - to provide clearance from property as it is believed pests/rodents are using the trees to get into the roof of clients property

a) T15 Oak tree ( Quercia robur) , located in the rear garden, right hand boundary. Work required : All round reduction of 2 metres to balance the tree, removal of deadwood and cutting back of branches touching the roof and house, removal of epicormic growth up to lower branch. Reason : as part of continued maintenance to control and contain overall size of the tree due to close proximity to the house. b) T18, White Willow ( Salix Alba): located in the rear garden right hand boundary. Work required : All round reduction of 3 metres to balance the tree and removal of deadwood and removal of epicormic growth up to lower branches and removal of a hanging broken branch Reason: continued maintenance and to reduce wind loading and sail area of the tree as large branches break and fall in the wind.

The application relates to work needed to 3 trees under a general TPO. The follow plan identifies the trees T1, T2, T3 T1 Willow - Fell to level where there is no further rot to allow to grow back This is beautiful weeping willow which was made up of two main trunks. During September this year, one of these trunks fell and crushed our green house. A tree surgeon removed the fallen tree and during their assessment confirmed that this had been caused by rot in the main trunk of the tree. Their assessment is that there are 2 remaining risks 1) its likely the rot will exist in the remaining trunk and 2) significant imbalance increasing the risk of the fall. The advice was to unfortunately cut back the remaining trunk down to a level where the rot stops to try and let it regrow. T2 Plum Tree: Fell to ground level due to fungus, no recent growth clearing to give other trees and bushes space to grow T3 Spruce: Fell to ground level as increasingly leaning into neighbours, routes now above ground of lawn, and damaging walled boundary

T275 - Walnut Tree on the boundary of 79 and 77 Valley Road at the front. To trim the tree to avoid contact with the house and gutters where branches currently overhang. Reduce by 1 metre all round to create a reduced crown.

T1 sycamore (Acer pseudoplatanus) Approx Height -22mApprox Crown Spread Diameter - 12m Work required- Reduce height by 5-6m and lateral growth by 3-4m and a 25% crown clean Reason - to contain and control as per clients instructions T2 multi-stem sycamore (Acer pseudoplatanus) - rear garden top right hand corne Approx Height - 20m. Approx Spread -12m Work required - Fell as close to ground level as possible and treat with one application of glyphosate only, to prevent regrowth Reason - tree has totally outgrown its location as per customers instructions T3 sycamore (Acer pseudoplatanus) - centre of rear garden Approx Height - 19m Work required - Crown lift to (8m) above ground level to crown break and Remove major deadwood over 40mm diameter or 1m in length Reason - as part of continual maintenance T4 sycamore (Acer pseudoplatanus) - rear garden right hand side Approx Height - 18-20m. Approx Spread - 10m Work required - Fell as close to ground level as possible and treat with one application of glyphosate only, to prevent regrowth Reason - trees have totally outgrown its surroundings as per clients instructions T5 multi-stem sycamore (Acer pseudoplatanus) - rear garden right hand side near house Approx Height - 18m. Approx Spread - 7-8m Work required - Fell as close to ground level as possible and treat with one application of glyphosate only, to prevent regrowth Reason - Tree is preventing other various species to grow as per clients instructions T6 Oak (Quercus Robur) - rear garden right hand side of garden close to property Approx Height - 17m. Approx Crown Spread Diameter - 6-8m Work required- reduce height by approx 3m and later growth by 2-3m to match Reason - as per customer instructions T7 multi-stem sycamore - left hand boundary Approx Height - 18-20m. Approx Spread - 8m Work required - Fell as close to ground level as possible and treat with one application of g...

T1 - Lawson cypress (Chamaecyparis lawsoniana) Approx Height - 8m Location - right hand corner of rear garden Work required- To reduce height by approx. 3m in line with with neighbouring hedge line Reason - as per customer request T2 - Scots Pine (Pinus sylvestris) Approx Height - 12m Location - right hand boundary of rear garden (neighbouring tree of No. 5 The Beeches WD3 5DT) Work required- reduce height by approx. 6m to main crown break and remove remaining Ivy to reduce sail within the tree Reason - Heavily leaning tree - Client would like to add "As clearly visible in the photos taken during Scott's visit to my property, the tree in question is leaning quite substantially (more so following the heavy wind a few months back). With our young children regularly playing in the garden and indeed proximity to our house, we feel the tree poses a serious safety concern for us"

T1 - Ash (Fraxinus excelsior) Approx Height - 20m+ Location - Rear garden near left hand boundary just behind client small outhouse (bar) Work required - Pollard tree to second set of unions at approximately 12m Reason - tree recently had a very large limb fail which made up approximately a third of the trees crown, remaining crown now open to new wind exposure. The failed limb has created a slight longitude crack at the main union junction for the remain x2 stems at approximately 9m, crack susceptible to worsen through continuous wind loading. Multiple wood pecker holes up along remaining stems with clusters of fungal fruiting bodies believed to be Inonotus hispidus surrounding, possible cause of the major limb failure. T2 - Ash (Fraxinus excelsior) Approx Height - 20+m Location - Rear garden in middle (adjacent to tree T1), right hand side to clients small outhouse (bar) Work required- remove x1 large dead branch overhanging clients small outhouse (bar) Reason - to remove potential hazard T3 - Spruce (Picea spp) Approx Height - 14m. Approx Spread - 6m Location - Rear garden left hand boundary near house Work required- Fell as close to tree's current ground level as possible and leave the stump in the ground Reason - tree is dead

T1 Beech (fagus sylvatica) Approx Height - 20-22m. Approx Crown Spread Diameter - 12m Location - rear garden left hand boundary (Tree belongs to The Russell Primary school in Chorleywood) Work required- crown reduce all overhanging lateral branches by 2-3m to good growth/branch fork junction Reason - Tree is completely overshadowing client's garden and house and significantly reducing natural light into the property as per customers request G1 - Beech Approx Height - 16-18m. Approx Crown Spread Diameter - 10m Location - rear garden rear boundary Work required- Crown reduce 2 x trees by approx 2.5-3.5m all round to create a more manageable and compact crown Reason - Trees within G1 are outgrowing it's surroundings and are beginning to encroach onto property as per customers request T3 - Birch (betula) Approx Height - 12m. Approx Spread - 2m Location - front garden- right hand corner Work required - Fell as close to ground level as possible and treat with one application of glyphosate only, to prevent regrowth Reason - dead/dying dangerous tree P.N Due to the dangerous nature of this tree, use of MEWP will be required to carry out works at an additional fee

Tree number - G1 Tree type - X1 Sycamore ( acer psuedoplatanus) & X1 Beech (Fagus sylvatica) Approx Height - 16-18m Location - Rear garden left hand boundary Service - Crown Reduction Work required- >Sycamore- Crown reduce by removing approximately 2.5-3.5m (back to previous growth points) from all over > Beech - crown reduce all over by removing 2-3m (back to previous growth points) also to sever Ivy at base of tree Reason- as part of continued maintenance to allow more light to the house/garden