Variation of Condition 2 of Planning Permission 19/00200/FULL (Demolition of former commercial buildings; conversion of listed barn into B1 offices; conversion and extension of stable (inc workshop) and former granary to create new dwellings; rebuilding and remodelling of Dutch Barn as a dwelling; erection of a terrace of three dwellings with associated parking, landscaping, cycle and refuse stores) - Approved plans

Partial demolition of existing two storey workshop bay incorporating ground and first floor admin and office suites and remodelling to create new office and administrative support areas. Alterations and re-roofing of attached factory and service bays. Removal of single storey later addition to existing workshop and service bay building. Associated landscaping reinstatement and operational development. Application follows earlier part implemented scheme under 21/03147/FUL.

DEMOLITION OF BUILDINGS AND THE ERECTION OF 2 NO. INDUSTRIAL UNITS TOGETHER WITH THE PART DEMOLITION/PART EXTENSION AND REMODELLING OF EXISTING INDUSTRIAL BUILDING TO FORM 7 NO. UNITS (USE CLASSES E (G)(II) (III), B2 AND B8) WITH ANCILLARY OFFICE SPACE. RECONFIGURATION OF CAR PARKING INCLUDING SERVICE AND VEHICULAR CIRCULATION AREAS, LANDSCAPING, INFRASTRUCTURE WORKS AND OTHER ASSOCIATED WORKS.

Partial demolition, alteration and extension to provide office and flexible office/restaurant floorspace (Class E) at ground, lower ground and basement level and office floorspace (Class E) on upper levels comprising (i) demolition of level 7 and plant enclosure above; (ii) creation of new office floorplates at levels 7, 8, and 9 and plant enclosure above; (iii) retention of lower ground and basement level and concrete frame at ground to level 6 with replacement front and rear facades; (iv) remodelling of office entrance, associated external alterations at street level including creation of new entrance; (v) creation of external terraces and associated hard and soft landscaping; (vi) provision of ancillary cycle parking and associated facilities; and (vii) other ancillary works.

Change of use of building (currently Class E Offices) to become Class C (Dwellinghouse) to form 4no apartments with associated internal remodelling and external improvements

The scope of works includes converting the loft of the bungalow to relocate the bedrooms to the new first floor and remodelling at the ground floor with new open plan living, kitchen and dining space, a gym and office accommodation.

1) Change of use of office space to 14 self contained apartments including internal remodelling. 2) Installation of new window on second floor of the building

(i) Change of use of the upper floors from office (Class E) to residential (Class C3) to create four residential units; (ii) Remodelling of third floor and erection of an additional storey to roof; (iii) Replacement of existing entrance to provide separate entrances; and (iv) installation of door and balustrades to rear first floor terrace.

Remodelling of existing dwelling: Proposed loft conversion; forming bedroom, office and ensuite, internal 1st floor alterations; forming new master bedroom, ensuite and dressing, internal GF alterations and front single storey extension; forming new kitchen, dining, sitting, utility, WC and front porch.

Alterations and extensions including erection of first floor extensions to each building, erection of a two storey link extension between and single storey extensions to existing Carlyle and Millside/Ambassador buildings, with remodelling and revised internal layout to provide 19 bedrooms with en-suite facilities at first floor, and shared multi-purpose room and facilities at ground floor, plus additional staff facilities at first floor of office building, with associated works