Proposed Loft conversion and raising of the roof ridge height with the addition of 1no. dormer to the rear (north) elevation and 1no. dormer to the front (south) elevation. Erection of single storey and first floor rear extensions and conversion of existing detached garage into a playroom. Alterations to the front access to include erection of a 1.8m high close-boarded fencing to the southern boundary, and widening of the existing front openings with new pillars and the existing steel gates to be removed and replaced with new timber and steel gates.

Conversion of the first and second floor to 2 self-contained flats, ground floor to commercial unit, alterations to windows/doors, cycle store, installation of lift, and terrace with glass balustrade to second floor, and erection of rear wall and gates (existing single storey extension, fence and fire escape to be demolished)

Application submitted under Section 73 of the Town and Country Planning Act 1990 for the variation of condition 3 (approved plans) attached to planning permission 21/00081/FUL dated 07 May 2021 (Conversion of basement bar and part ground floor (Use Class Sui Generis) to 1 no. two bed flat and retail storage area (Use Class C3/E) including demolition of side and rear outbuildings, removal of rear external staircase, erection of 2m boundary fence, alterations to windows and doors and associated works) to permit alterations to layout to accommodate a 3 bed flat instead of a 2 bed flat

Loft conversion, replacement windows, internal works, landscaping, erection of new boundary fence and other associated works

Part-retrospective application for the conversion of the single dwellinghouse into two 3-bed self-contained flats, together with the erection of a single storey ground floor rear/side extension and the provision of refuse/cycle stores and installation of a fence/ gate to the front.

DEMOLITION OF LEAN-TO AT REAR OF STABLE BLOCK.  EXTERNAL WORKS INCLUDING REPAIRS TO CHIMNEY STACK (INCLUDING REPLACEMENT POTS); RIDGE TILES / SLATES; TIMBERS AND GABLE WINDOW OF STABLE BLOCK AND PART CONVERSION TO FORM OFFICE AND TOILET ACCOMMODATION.  ERECTION OF LEAN-TO STORE AREA; SITING OF SHIPPING CONTAINER TO PROVIDE KITCHEN, BAR AND CELLAR FACILITIES; ERECTION OF PERGOLA AND TIPI COVERED AREA WITH ASSOCIATED HEATER ENCLOSURE AND PROVISION OF ACCESS RAMP AND STEPS IN ASSOCIATION WITH THE PROVISION OF AN OUTSIDE DINING / DRINKING AREA.  ERECTION OF BOUNDARY FENCING AND INSTALLATION OF GATES WITHIN EXISTING WALLS TOGETHER WITH ASSOCIATED WORKS AND LANDSCAPING.

Extension to and addition of two floors to garage and conversion to separate dwelling, new garage and entrance to existing house and new fencing to northern boundary

Erection of a bin store and provision of cycle parking in the front garden; formation of a roof terrace with the erection of screening to the rear elevation at upper ground floor level on top of the existing back addition; erection of an external timber staircase with a timber balustrade to the rear elevation from upper ground floor to rear garden; installation of French doors to replace the existing window to the rear elevation at upper ground floor level, to provide access to the rear garden via proposed staircase; erection of timber fence in the rear garden; conversion of the existing single dwellinghouse into 2no. self-contained flats (comprising of 1 x 3 bedroom maisonette at ground and first floor level and 1 x 1 bedroom at lower ground floor level).

Erection of single storey extension to rear, conversion of existing garage into additional living accommodation, construction of double garage extension to the front with accommodation above, erection of 2.0m high boundary wall following removal of existing concrete post and timber panel fence

Change of use from a former post office into a funeral directors. Conversion of existing garage to a mortuary, replacement of an existing window in the south elevation of the main building into an access door and provision of 1.8m high close boarded fencing between the main building and garage to provide privacy screening