T.1 Walnut - Reduce overall crown height and spread by approx. 2-3m, back to suitable points around previous pruning points, removing any significant deadwood, crossing and rubbing branches. This will remove any risk of possible branch failure by reducing weight on large limbs and stress on main trunk unions and decaying stems; Group 'X' Apples - Reduce & reshape to previous pruning points; Apple Trees- Re pruning several trees as previously done; T.2 Sycamore - Reduce overall height and spread of crown by 1-2m, prune clear of roof and clean out crown; TG.1Silver Birch - Reduce height of overall group to a uniform level of smallest tree, reduce spread over driveway by 1-2m and prune clear of building by 2m, shaping overall group to suit. Also remove smaller Silver Birch standing forward of group close to summer house, this tree has a weak crown structure and is showing signs of crown dieback.

T.1 Cedar - Fell (dieback throughout crown) and replace with similar size tree; T.2 Ash - Remove deadwood and crown raise by removing lowest downward sweeping branches (below where main stem divides); T.3 - Sycamore (growing beneath crown of Ash - there are 2, the one to be felled is the one to the rear i.e. set back further from the garden, the closer one is to be retained); T.4 - Hawthorn (in hedge along front of property) - Fell; T.5 - Beech (growing up through crown of Ash - Fell; G.1 - Cherry Laurel x 2, Holly - Fell and Box - reduce & reshape as necessary (to show off the Yew behind); T.6 - London Plane - Crown raise to approx 5m, and prune back to give 2m clearance from roof and chimney; T.7 Sycamore - Crown raise by removing low growth from right hand stem (when viewed from garden looking back towards house) from around the location of a previously pruned branch (lowest branch, growing to the right), and removal of vertical growth from the pruned branch and 3 small branches growing to the right; G.2 Willow pollard and Lombardy Poplar x 2 - Fell (in poor condition within line of boundary trees).

T.1 Sycamore (yellow dot) - Raise crown to approx 5m above ground level (agl) to clear street light & highway. T.2 Robinia (red dot) - Remove two lowest branches, overhanging & touching roof of adjacent building. T.3 Yew (green dot) - Adj BT pole - Reduce and reshape crown accordingly, to clear BT pole & phone lines and raise crown to approx 3m agl. T.4 Yew (closest to house) - Reduce and reshape crown by approx 2-3m.

T.1 London Plane - Raise crown by removing a combination of selected low lateral, primary and secondary branches, and reduce selected branch endings to suitable secondary growing points to achieve an even height above ground level, equal to the gutter height of the house and ensuring at least 3m clearance of the roof, as discussed and agreed on site.