Liquidambar : crown reduce height to 1.5m below lines; side of crown over pavement cut back to a 30cm inside roadside curb and other sides reduced to a tidier dome. Magnolia : reduce crown height to 4m to encourage lower growth to avoid wind damage and leave a 1.5m clearance from main house (around line of veranda).

T1, Strawberry tree : re-shape to leave a more compact form to leave a height of approximately 3m and a spread of approximately 3m. T2, Albizzia julibrissin : shorten back long branches into the crown to a suitable side branch to lessen the likelihood of breaking.

T1, Horse Chestnut: sectional feeling of the tree to leave as a 'monolith' at a height of 6m.

Pine : complete removal

Yew tree : pruning back from thatch by 2m or as per the annotated photo.

T3: Norway Maple - approximately reduce to upper previous pollard points at 3m above ground level, leaving multiple points to encourage a balanced crown formation and allow continued vascular connection. T6: Pittosporum - reduce to growth point approximately 1.5 metres above ground level. T8: Sycamore - remove southern stem and reduce northern stem by approximately 40%. T9: Plum - fell to near ground level. T12: Holm Oak- crown reduce by approximately 2m or further if permitted. Maximum diameter of cuts 50mm. T13: Cypress - dismantle to near ground level. T14: Goat Willow - pollard at existing pollard points, approximately 1.5 metres above ground level.

T001, Western Red Cedar: fell to ground level. (Located within 2.5m from the property.) T002, Western Red Cedar: Fell to ground level. (Located within 2m of the property.) T003, Scots Pine: Fell to ground level. (Located against garage/workshop.)

Bay: dismantle and fell to near ground level.

T1, Silver birch: 1. 1st order branch on the east side of the stem at 1.3m - reduce by 2m to a suitable growth point 2. 1st order branch on the west side of the stem at 1.7m - reduce by 1m to a suitable growth point 3. Crown lift by removing 3 small branches of < 2.5cm diameter 4. Reduce the height by up to 1.5m by tip pruning/thinning, maximum diameter cuts 2.5cm T2, T3 and T4 Himalayan birches: Crown lift up to 2m removing branches no larger than 4cm diameter T5, Silver Birch: 1. Crown lift up to 2m removing branches no larger than 4cm diameter to clear the adjacent shrubs 2. Reduce the height by up to 1.5m by tip pruning/thinning, maximum diameter cuts 2.5cm

T1: Holly - remove dead stems and re-shape remainder to encourage better form.