Felling of 1 no. Cypress tree (T1) and crown lift 2 no. Horse Chestnut trees by 4metres to garden side only (T2 and T3), felling of 1 no. Laburnam tree (T4), felling of 1 no. Ash tree (T5) and felling of 1 no. Maple tree (T6), lateral lift above the garage of 1 no. Conifer and 1 no. Ash tree (T7 and T8).

T1 (Ash) - prune low hanging branches to create a 2.5m ground clearance over site T2 (Sycamore) - prune low hanging branches to create a 2.5m ground clearance over site T3 (Sycamore) - prune low hanging branches to create a 3m ground clearance and 2m clearance from garage wall and roof T4 (Walnut) - prune low hanging branches to create a 2m clearance from garage / outbuilding walls and roofs T5 (Ash) - prune low hanging branches to create a 5m ground clearance for vehicular access

Crown reduction to 1no. Willow Tree up to 2 metres, with a trim and removal of dead wood all round of up to 3.5 metres, and top crown 1no. Cedar Tree by 2 metres and trim out any dead wood and branches that touch the garage and other trees. Within Knaresborough Conservation Area.

Lateral draw back to boundary of Conifer (approx. 1m) no. 1 (T1). Lateral draw back to boundary of Yew (approx. 0.5m) no. 1 (T2). Crown lifting over garage of Alder (approx. 1m) no. 1 (T3). Crown reduction of Laburnum (approx. 1m) no.1 (T4).

T1 Leyland Cypress - reduce branches that extend over garage roof back to the main stem T2 Lawson Cypress - reduce in height by 4 meters to 6 meters

T1: Birch, reduce extended leaders all the way around by 1.5m no cuts bigger than 40mm. T2:Mapple, lateral reduction from garage roof by 2m to give clearance. T3: Rowan, remove to ground level. remove stump and replace like for like new tree. T4 :Cherry, reduce extended leaders to help reduce wind load. reduction of 1.5m maximum cut 35mm. T5: Copper Sycamore, 3m clearance from the property and 2.7m crown lift to allow foot traffic past in the garden.

Prune 3 Cherry trees: Crown lift all round by 2.5 meters from ground level so the hedge is fully visible and good clearance over lawn area. Crown thin the canopy by 15% to let light and air penetration through canopy. Reduce in height and spread by about 2-3 foot to contain and shape. Prune Cherry x 3 group located at the side of house according to the following specifications: Crown lift all round by 3 meters from ground level to clear road/drive/path. Remove dead wood and snapped branch stubs throughout the canopy. Pruning Crown thin the canopy by 10% to let light and air penetration through canopy. Reduce away from house side by 1.5 meters to give good clearance to house and reduce away from garage roof to give 1 meter clearance. Reduce in height by 1-1.5 meters to contain.

Crown lift (on garage side only by 2m) of 1 no. Horse Chestnut Tree (T2), Re-pollard to previous pollarding points (approximately 3m reduction) of 2no. Eucalyptus Trees (T3) and (T4), Crown Reduction (by 2.5m) of 1 no. Lleyandi (T5), Lateral reduction (by 1m) of 1no. Pine Tree (T6) and 1no. Conifer Tree (T7) within Harrogate Conservation Area.

Pruning of 1 no. Eucalyptus tree. Remove low limb and reduce lateral spread of extended branching over garden by 2.5 - 3 metres. Selective prune to clear upper crown of adjacent lime by 2 metres. Crown clean to remove dead wood. Prune the Walnut (ID4) located at the back of the property in the left hand corner according to the following specifications: Reduce low limb over neighbouring garage by 1=1.5 metres to suitable secondary branch.