T1 Hornbeam x 2 - Crown lift to provide 4m clearance from adjacent shed. T2 Hornbeam - Remove major deadwood throughout whole crown area (Deadwood > 25mm in diameter - exempt).

Laurel tree (No. 1) at front of driveway, bordering No. 30 - Raise canopy to allow sufficient access for vehicle on to driveway. Prune overall to regain shape, reducing by approximately 2m all over. Laurel tree (No. 2) on left hand side of front garden, bordering No. 34 - Remove. Apple tree (No. 1) in middle of rear garden - Prune entire canopy to reduce by approximately 2m all over. Apple tree (No. 2) at bottom left of rear garden next to garden shed, bordering with No. 34 - Prune entire canopy to reduce by approximately 2m all over. Wisteria by front door - Remove.

T2 Prunus domestica (Damson) in rear garden, near shed - Prune to reduce crown on all dimensions to the vicinity of previous reductions points.

T1 Oak on left hand side in rear garden of No. 57 - Option 1: Remove 3-4x lowest horizontal limbs overhanging garden of No. 55. Option 2: Reduce back overhang from garden of No. 55 to edge of lawn/path line by approximately 1.8-2m of branch length. T2 Oak on right hand side of rear garden - Reduce back upper crown overhanging lawn area by 1.5-1.8m of the branch length. Remove epicormic growth on garden side. T3 Multi-stemmed Sycamore on right hand side of back boundary in rear garden - Remove epicormic growth and 1x lowest horizontal limb overhanging shed roof.

x6 very tall Conifers on the area directly behind the green keeping sheds and area backing onto the public footpath in Imperial Road - Cut down the trees to half height and reduce remaining Conifers in the same area by 40%.

T1 Magnolia on rear boundary - Reduce in height and lateral spread by no more than 1m. T2 Leylandii (two stems over extending hedge on rear right hand side) - Reduce by 8m to height of trimmed hedge. G2 Lilacs x3 on rear left hand boundary behind shed - Fell.

T1 Silver Birch tree next to shed in rear garden - Section fell to ground level.

T1 Ash on front left boundary - Section fell to ground level. T2 & T3 Leyland Cypress on front boundary - Section fell to ground level. T4 Oak adjacent to shed - Reduce lateral spread by 1m to reduce leverage and reduce height as appropriate to leave a rounded form. T5 Lombardy Poplar - Reduce in height by 6-7m. T6 Cobnut on front boundary behind shed - Reduce in height by 0.5m and reduce sides as appropriate to leave a rounded form.

T1 Sycamore - Fell tree. T2 Cherry - Fell tree. T3 Laurel - Prune crown to allow 2m clearance of building and prune back by 2m from height and 2m from lateral limbs. T4 Hazel - Thin crown by removing the 10% largest stems. T5 Apple - Fell tree. TG6 - 1 x Laurel, 5 x Holly and 1x Sycamore group (smaller trees along fence line at boundary) - Fell trees. T7 Ash - Prune back by 4m from height and 1m from lateral limbs. T8 Ash - Prune back by 4m from height and 1m from lateral limbs. T9 Maple (Norway) - Prune back by 3m from height and 1-2m from lateral limbs. T10 Maple (Norway) - Prune back by 3m from height and 1-2m from lateral limbs. T11 Sycamore - Fell tree. T12 Yew - Prune back to boundary line to stop contact with shed roof.

T2 Ash (tree has significant area of dead bark at base north approx. 35% of circumference) - Remove branch at 5m south west over shed and reduce branch at 5.5m west to first growth point. Reduce crown by a maximum of 3m height and maximum radial crown spread by 1.5m-2m. (Remaining tree to be approximately 12m tall with radial spread of approximately 4.5m). T3 Ash - Crown lift west to 3.5m (light growth). Remove 3 x small branches west (towards shed) between 4m - 7m above ground level.