T192 Sycamore - reduce in height and spread by 4m; ; Gp 6 Willow - re-pollard to near previous; Gp 7 Willow and Maple - coppice Willow stem over fence; T200 Common Hazel - coppice.

Ash Trees to be cut back to within boundary fence.

Fell Lawson Cypress by sections to fence height as it is becoming too large for it's location

Sycamore (T1) - remove tree. Group of Hawthorn/Dogwood (T2) - trim back branches by 1.5mtrs overhanging the fence & roadside to form a hedge, remove 2mtrs to leave 3.25-3.5mtrs tall. Sycamore (T3) - remove. Hawthorn (T4) - reduce by 2.5-3 mtrs to leave 3.25-3.5 mtrs to form & maintain as a hedge. Hawthorn (T5) - reduce by approx 1mtr to leave 3.25-3.5mtrs to form & maintain as a hedge.

(1) Holly - reduce its height & spread by approximately 30% to leave it approximately 5 - 6m tall with a radial crown spread of approximately 2.0m. (2) Hawthorn - remove Mistletoe completely. Reduce in height to approximately 4.5m with a radial crown spread of approximately 1.75m & remove the lowest branch over the fence. (3) Silver Birch - Fell to near ground level. (4) Silver Birch - reduce to approximately 6.0m tall (approximately to previous) and shape. (5) Group of 3 Birch - remove the 4 small branches overhanging the boundary. (6) Mirabelle plum - remove 3 branches over boundary.

T1 - Lawson Cypress in front garden to fell to ground level. T2 - Holly in boundary fence line to fell. T3 - Reduce Maple on the rear boundary by up to 3 metres leaving a height of approx. 7-8 metres and a radial spread of approx. 5-6 metres

(1)T1 Ash - Fell (2) T186 and T187 Crack Willow - Coppice to near ground level. (3) T3 Apple - Cut back the overhang to the boundary. (4) Sever Ivy (5) Cut to the fence and up to a height of approximately 4.0m.

1. 1x multi-stemmed hazel remove approx. 5 stems from fence side of stool. Reduce remaining stems by 2m in height. Selective lifting of branches over garden to 2m above ground level. 2. 2x yew trees (growing as one canopy) prune clear of building by 1.5-2m and lift canopy to eave height on house side only (measurement from ground level unusable due to sloping group).

Purple Crab Apple (T1) crown thin by 30% & reduce by 45 -50% leaving a height of 2.5-3 mtrs & a radial spread of 2 mtrs, below previous pruning points to reduce away from roof & gutter of garage. Birch Tree (T2) - reduce by 30-40% to leave a height of 6 mtrs & a radial spread of 1.75-2 mtrs. Cotoneaster (T4) - reduce by 25% to leave 3.5 mtrs high & 2 mtrs radial spread; remove lowest limb over neighbours fence. Cypress (T5) - reduce by 20% to leave 4 mtrs high, reduce skyward lateral growths to 3-3.5mtrs to balance height to pyramidal shape.

T-1 3 x Ash trees, stage 2 Ash dieback. Fell trees, trees are close proximity to car park. T-2 Horse chestnut, dead standing. Fell - Tree is dead standing and leaning over fence and close to public footpath. T-3 Ash Tree, stage 2 Ash dieback. Fell tree, tree is within castle grounds, fell due to safety concerns. T-4 Beech tree, Crown clear and deadwood, substantial deadwood within crown, clear as footpath runs underneath tree. T-5 Hornbeam, crown clear and deadwood, substantial deadwood within crown, clear as other out house and close proximity to footpath.