Tree number - G1 Tree type - Elder and Honeysuckle Approx Height - 8m Location - Left hand boundary, to side of garage Service - Crown Reduction Work required- Prune all overhanging growth hard back to clear garage roof. Reduce height to match neighbouring hedge removing approximately 2-2.5m. Reason - As per customers wishes, To clear structure and ease future maintenance

T1 - Yew - Reduce tree by 3.5 - 4 metres, and reduce retained lateral limbs to balance canopy (1.5-2.5 metres) to maintain at a reasonable size for location T2 - Cypress - Large twin stem conifer by corner of shed - remove thin upright stem between two main stems (leave the stem close to shed for now) and crown raise the canopy by 2 metres to allow more light underneath T3 - Cypress - Multi stem conifer, crown raise to match twin stem conifer in front (1-1.5 metres) T4 - Cypress - To left of shed, reduce canopy height by a third (1.5-2.5 metres), to allow more light to surrounding trees and garden T5 - Prunus - Rear boundary - dismantle and remove twin stem prunus leaning on fence over neighbours, poor form and causing damage to fence T6 - Yew - Remove two or three low select branches, and check and remove if necessary any small branches that are significantly fouling phone line, to clear services and left canopy away from cars

T1: Ash (Fraxinus excelsior) located on the rear boundary of rear garden Fell to ground level. SG1: Stump grind T1. G1: Privet Box Hedge located in front garden - hedge is showing signs of box blight, grab/dig out approximately a 4m stretch of dead hedge.

Tree Number - T1 Tree Type - Field maple (Acer campestre) Approx Diameter at 1.5m - 550mm Approx Height - 15m Approx Crown Spread Diameter - 9m Location - rear garden rear boundary Service - Crown Reduction Work required - Crown reduce all over by removing 2.5-3m back to previous pruning points, remove all deadwood over 25mm in diameter and/or 0.5m in length Reason - as part of regular cyclical maintenance

Tree number - T1 Tree type - Oak Approx Height - 14m Location - Rear boundary Service - Cut Back Work required - Cut back over road only by removing approximately 2.5-3m pruning to suitable growth points Reason - As part of continued maintenance

The Cherry tree is located next to the front path, on the boundary of 5 Pembroke Road. The request is to remove the tree as it is old and does not grow/flower much at all. It is now overshadowed by the cherry tree on the road verge. I am replacing the tree with an alternative cherry tree on the same plot (but in a different location). The tree is being provided by Herts CC tree scheme later this Autumn. Please note that the tree is on the plot of 5 Pembroke Road and is NOT the substantial cherry tree on the roadside verge. This is owned by Moor Park 1958 and will not be touched in any way.

T1 - Self seeded Fir - Fell - rear of 174 T2 - Lilac - located in rear garden of 172 - cut overhanging branches back to boundary T3 - Apple - located in rear garden of 172 - cut overhanging branches back to boundary T4 - Apple - located in rear garden of 176 - cut overhanging branches back to boundary

T1 Cedar - front garden - (as shown on submitted map) overhanging from neighbour's garden. Reduce overhang from neighbours by 2m, back to boundary where possible to abate nuisance.

1 x Ash tree - fell. Overcrowding and it is impacting growth of adjacent conifers and substanial overhang onto front drive. Red Cedars at rear of property - reduce height by 3 - 4 m There are 4 cedars that need topping out on the rear of the property. One of them is bifurcated. The reduced height will be back to the point of previous cuts. The Ash is on the boundary with Miraflores, but all of the growth is towards our property. I have consulted with the owner of Miraflores they would also like the Ash removed as well which self seeded a few years ago and we have agreed to jointly cover the costs. I have included in this TPO since we were having the additional work done to the rear.

T1 - Willow - Rear garden, Left hand boundary Approx Height - 11m. Approx Crown Spread Diameter - 10m Service - Repollard Work required- Re-establish pollard at previous pruning points, remove large decaying limb back to source. Reason - As per customers wishes, to form a more compact crown and reduce debris and encroachment over adjacent properties