T1 Beech- Crown Reduction 20%, remove overhanging branches from the garage and shed, and cut branches over the lawn by up to 10ft.

(1) Arbutus Unedo - Cut back from garage roof. (2) Thuya - Remove. (3) Dead Trees (Unknown) - Remove. (4) Dead Pine - Remove. (5) Conifer - Remove. (7) Flowering Cherry Tree - Remove, diseased. (8) Bay Tree - Cut back from boundary.

(1)- Lilac on the bottom corner adjacent to your neighbour's garage. Fell to near ground level. (2)- Lilac adjacent to item (1) running along from the corner towards the Beech hedge. Fell to near ground level

T1 Oak in the front garden close to the right hand boundary (20m in height x 6m crown spread) - Reduce in height by approximately 2m. Reduce lateral branches overhanging the garage by approximately 3m.

Reduce crown by 1.5-2m and crown thin by 10%, remove lower branches over garage, crown raise limb on south side and prune back to upright branches, crown raise/lift lower branches and east side neighbouring buildings to 1 Aesculus Hippocastanum (Application for works to trees in a Conservation Area)

T1 Conifer- Crown lift by approximately 2m. Reason: To clear garage roof. T2-3 Conifer- Section fell both trees to as close to ground level as possible. Reason: These trees have outgrown this space and have just become too big.

T1 Horse Chestnut - Crown reduce overhang on this half of the tree over Old Bull Mews to previous pruning points, removing approximately 2m of crown, including reducing low limb over neighbours garage.

NORTH FERRIBY CONSERVATION AREA - Crown reduce 1 no. Beech tree (T01) by reducing 1 no. south-west facing by 5m back to historical pruning point, remove 1 no. west facing subordinate stem at scaffold union, reduce west by north facing branches at 4m and 4.5m respectively by 5m back to historical pruning point, crown reduce north-west facing branches by up to 5m to tighten canopy profile and minimise canopy over-hanging garage roof, reduce west facing upper canopy by up to 2.5m to match new crown profile and to reduce the number and extent of overhanging branches shading garden structures, patio surfaces, and to move the canopy edge back towards the plot boundary

The Ash tree is located to the north east corner of my plot. I would like to reduce the height to 1m below the power cable giving a finished height of approx 5m. The tree currently overhangs my neighbours (3 Devonshire Cottages) garage and drive by approx 2.5m The tree currently overhangs the highway by approx 3m I would like to cut both of these overhangs back to my boundary line and reshape the crown to the south and east. Plum tree adjacent to the Ash. Reduce the height to match that of the Ash tree when cut. Large Pissin Plum to south of plot Request a 50% reduction to height and spread. Tree works as per schedule.

The trees are at the side of my garden and at the back of the garden the trees are causing housing issues for example the tree roots have spread to the drains and when we moved in the toilet was blocked which meant we had to hire a plumber and also someone that went into the drain system to remove the roots and allow the water to flow freely The trees at the side are also reaching our windows and garage and causing loud banging sounds when windy, they also reach over to the neighbours garden and on to their shed also causing noise. The trees are making the back garden very messy with its bark and leaves falling off. The trees is also lifting up our patio in the back garden making it not safe to have family and their kids in the back garden. The back tree has alot of things falling off it and making the garden unsafe as well.