Works to trees in a Conservation Area: T1 - Self-sown triple stemmed Ash tree, approx 9m in height, very close to right hand boundary and growing through a prunus which we would like to preserve for its fruit. Works - Remove by felling at ground level T2 - Self-sown Ash tree similar in height, again very close to the boundary fence and the garden shed at the bottom of the garden. Roots pushing up paving, and potentially the foundation of the shed. Works - Remove and the stump either removed or poisoned.

T1 - Raise trees over road & driveway - T2 - Remove branch over shed roof - T3 - Remove overhanging branch over boundary fence

T1 - Yew - Reduce tree by 3.5 - 4 metres, and reduce retained lateral limbs to balance canopy (1.5-2.5 metres) to maintain at a reasonable size for location T2 - Cypress - Large twin stem conifer by corner of shed - remove thin upright stem between two main stems (leave the stem close to shed for now) and crown raise the canopy by 2 metres to allow more light underneath T3 - Cypress - Multi stem conifer, crown raise to match twin stem conifer in front (1-1.5 metres) T4 - Cypress - To left of shed, reduce canopy height by a third (1.5-2.5 metres), to allow more light to surrounding trees and garden T5 - Prunus - Rear boundary - dismantle and remove twin stem prunus leaning on fence over neighbours, poor form and causing damage to fence T6 - Yew - Remove two or three low select branches, and check and remove if necessary any small branches that are significantly fouling phone line, to clear services and left canopy away from cars

This application is for ONGOING CONSENT to the trees listed below T1- Twisted Willow. Pollard annually (or bi-annually depending on annual rate of growth) down to a height of between 4 and 5 feet. This work will manage the size and retain the ornamental value/feature of the twisted branches. T2- Plum tree. This is a fan-trained tree and needs annual pruning to retain the shape, size and ensure production of fruit T3- Greengage tree. This is a fan-trained tree and needs annual pruning to retain the shape, size and ensure production of fruit. T4 - Apple tree- this is a small, old apple tree that requires annual pruning to retain shape, size and ensure production of fruit T5 - Apple tree- this is a small, old apple tree that requires annual pruning to retain shape, size and ensure production of fruit. T6a and T6b - 2 Yew trees planted & trained to form an arch, height and width reduction on an annual basis. T 7 and T8 - 2 small Apple trees fan trained. Need annual pruning to retain shape, size and ensure fruit production. T9 and T10- 2 Sycamore trees in 78 Station Road up against the boundary fence. 2 years ago these trees were reduced significantly by the tree owners. In the 2 years since pruning re-growth has been rapid from the main trunk. These hang over into 86 Station Road, significantly reducing sunlight reaching the established fruit and vegetable beds in 86 Station Road reducing productivity. The branches will soon be over/touching/leaning onto the roof of the potting shed in 86 Station Road and could damage the roof. This application is for annual (or bi-annual depending on the rate of growth) removal of re-growth (to the boundary) coming from the main trunk up to a height of approx 10 feet from ground level

1 .Remove dead/dying weeping Ash to approximate ground level 2. Fell 4 small Yew trees close to house to approximate ground level to make way for shed. 3. Prune plum tree away from house and reduce in height approx 1m and crown clean 4. Repollard contorted willow tree to previous reduction points 5. Pollard Goat Willow in rear corner of garden by fence/wall, over-hanging neighbours garden with heavy over extended limbs. 6.Thin one Elder at the rear of the property by 30% and reduce by approx. 1m and remove crossing branches. 7.Trim Yew ( fastigiata) tree/hedge to the right of back garden gate. 8.Remove tall skinny Ash tree with dieback next to fruit trees. 9.Remove apple tree to approximate ground level. 10.Crown lift apricot (over gateway and allow for parking) and reduce longer limbs by approx 1m 11. Crown lift magnolia and reduce(no more than 30%) where possible away from the house 12. Remove young Ash tree with dieback symptoms on boundary between Yew tree and Contorted Willow

1.Mixed group - Fell large Conifer, reduce large Holly to a height of 3m, reduce all remaining woody shrubs to height of 3m and trim sides to shape/re-establish group boundary 2. Birch X 2 - Remove stem and prune to clear overhead phone lines by 1m 3. Bird Cherry - Remove stem encroaching roof/guttering, prune back branches overhanging neighbouring garden to the boundary 4. Mixed group - Fell Elder closest to Bird Cherry, reduce remaining woody shrubs to 3m and trim back sides to shape/re-establish group boundary 5. Elm - Finish off reduction started from neighbouring garden - to balance on garden side (by upto 1m) 6. Mixed group - Fell Elder in centre of collapsed Willow, tidy stubs from Willow and prune back from neighbouring garden. Fell large Conifer. Crown reduce and reshape Cherry tree by 3m 7. Willow - Remove large bows overhanging the shed, crown reduce and reshape the reminder of the tree by 3m to shape. Remove several low secondary stems which are damaging the boundary fence 8. Elder - Pollard at a height of 3m

Tree No 1. Magnolia - medium pollard trunk located 32cm away from front porch, causing potential foundational damage to property. Work to be done: cut to ground and grind out stump. Tree No 2. Yew - located between our house and adjoining property No 13. Work to be done: reduce to level of house guttering and shape all round. Tree No 3. Beech hedging - located front of house at public pavement. Work to be done: reduce to 6-7ft height and trim all round. Works at rear of house. These trees are all covered by a large overhanging Sycamore tree from our neighbour's garden: Tree No 4. 2 beech trees - located at boundary fence near neighbour's large, oversized Sycamore tree. Work to be done: cut to ground. Tree No5. Holly - small tree located 4ft away from Beech trees - see 4 - Work to be done: cut to ground. Tree No 6. Holly - large tree located near garden shed. Work to be done: cut to ground. Tree No 7. Sycamore tree located in neighbour's garden but branches dangerously overhanging into garden - approximately 30ft. To prevent risk of falling dead wood branches, and for safety reasons, the arborist noticed and recommended the removal these dead branches and cutting of a few limbs on the tree.

T1 Sycamore - Fell tree. T2 Cherry - Fell tree. T3 Laurel - Prune crown to allow 2m clearance of building and prune back by 2m from height and 2m from lateral limbs. T4 Hazel - Thin crown by removing the 10% largest stems. T5 Apple - Fell tree. TG6 - 1 x Laurel, 5 x Holly and 1x Sycamore group (smaller trees along fence line at boundary) - Fell trees. T7 Ash - Prune back by 4m from height and 1m from lateral limbs. T8 Ash - Prune back by 4m from height and 1m from lateral limbs. T9 Maple (Norway) - Prune back by 3m from height and 1-2m from lateral limbs. T10 Maple (Norway) - Prune back by 3m from height and 1-2m from lateral limbs. T11 Sycamore - Fell tree. T12 Yew - Prune back to boundary line to stop contact with shed roof.

G1 Coppice the small Hazel located directly in front of the small Yew tree on the front boundary. Prune and trim (by up to 1m) the 3x Yew located in the front corner of the garden to produce a more compact and symmetrical shape. G2 - Section dismantle 2x Sycamore (southern side of garden) - 2x smaller trees located adjacent to the shed and competing with the crown of the larger Beech. G3 Overhanging Sycamore (northern boundary) - Cut back to the boundary 2-3 branches overhanging the garden room to provide clearance. G4 - 3x Sycamore - Section dismantle the tree located on the fence line adjacent to the car port. Reduce the crowns of 2x trees located to the rear and western side of the car port (stem damage and decay evident on all 3x trees). To maintain healthy tree stock and manage the associated risks.

x7 Trees at 65A: T1 and T3 Sycamore trees; Clean out deadwood, reduce canopy spread over driveway. T2 Evergreen Oak: Fell, leans out over highway. Conifer trees T4,T6 and T7: Fell Cedar T5: remove lowest branch over shed and reduce canopy spread to 3m radius minimum, reshape. x2 trees at 65 Bargate: 65T1, 65T2; Yew trees, reduce canopy back to boundary fence x4 Trees at Fryston House FT1, FT2, FT3, FT4: Holly and Yew trees; cut back to boundary fence. ,