(1) Arbutus Unedo - Cut back from garage roof. (2) Thuya - Remove. (3) Dead Trees (Unknown) - Remove. (4) Dead Pine - Remove. (5) Conifer - Remove. (7) Flowering Cherry Tree - Remove, diseased. (8) Bay Tree - Cut back from boundary.

NORTH FERRIBY CONSERVATION AREA - Crown reduce 1 no. Beech tree (T01) by reducing 1 no. south-west facing by 5m back to historical pruning point, remove 1 no. west facing subordinate stem at scaffold union, reduce west by north facing branches at 4m and 4.5m respectively by 5m back to historical pruning point, crown reduce north-west facing branches by up to 5m to tighten canopy profile and minimise canopy over-hanging garage roof, reduce west facing upper canopy by up to 2.5m to match new crown profile and to reduce the number and extent of overhanging branches shading garden structures, patio surfaces, and to move the canopy edge back towards the plot boundary

Conservation Area Application : T1 - To crown reduce Apple tree to previous points (maximum 1 metre in both height and lateral spread) and shape on rear side boundary leaving a 2 metre by 4 metre parasol crown - annual pruning. T2 - To prune and shape Apple trees opposite in rear garden by a maximum of 30 cms in both height and lateral spread leaving a 1 metre by 3 metre crown - annual pruning. T3 - To cut neighbours overhanging Fig tree back to boundary by a maximum of 2 metres laterally and away from garage roof in rear garden. T4 - To cut back Holly tree growing into neighbours garden by a maximum of 2 metres in lateral spread and shape in rear garden leaving a 3 metre tall by 2 metre pear shaped crown.

Line of trees T1 to T7 on rear property boundary, medium mature trees crowded out inhibiting lower growth and broader tree health. Owner and neighbour would like to remove T 2 and T6 in order to promote more balanced growth. Copper Beech T1 Crown lift to 4.5 removing secondary and tertiary branches only Copper Beech T7 Crown lift to 4.5 removing secondary and tertiary branches only Oak T2 Remove leaving 4m habitat pole Oak T6 Remove leaving 4m habitat pole Ornamental T8 remove as now over grown by Copper Beech above and interfering with lower branches of T1 Ornamental Tennis Court T9 remove as old and unhealthy Lawson Cypress T10 remove as planted too close to neighbouring identical Lawson Cypress and causing imbalance in growth. Remove straight stem T10 and allow remaining tree to fill out Hornbeam hedge remove first tree and re shape hedge end. Planted by owners in middle of rear garden but now excessively segmenting garden. Yew T11 next to house is growing into the property and telephone lines. Owner wishes to subtly take back the tree by 2m on the house side whilst retaining shape and height, smaller branches only max cut 75mm Ash T12 suffering die back, permission to remove limb over road at front of property Yew T13 lift off garage roof by 1.5m and subtly reshape T14 Ash in center of garden, medium large tree with die back needs to be removed to ground level T15 Oak by tennis court, remove lateral limb over court to trunk as long lateral with no suitable growth point to cut to. Remove dead stump where previous limb has fallen. Subtle crown lift of lateral lower limb over garden to allow access for machinery T16 small Ornamental, poor condition requires removal and replacement

Notice of intent to carry out works to trees in a Conservation Area: Trees 1&2 - Silver Birch Lightly prune/shape boundary overhangs. 1 meter removed Tree 3 Cherry Remove overhanging cherry tree branch to boundary line Tree 3 Bay tree/hedge to face back to boundary line Tree 4 Yew hedge to face back to boundary line Tree 5 Dawn redwood - to remove the lower 2 branches by 1.2 meters that rest on garage roof Tree 6 Acer - to lightly hand prune/shape the crown.

1: Sycamore Tree which is 3 meters from the garage and has damaged the boundary wall and is at risk of falling. The cracks on the boundary wall have been increasing recently. Concerned about high winds may cause it to fall over the garage roof and cars on the drive way. Been advised by the tree surgeon it is best to fell this tree and stops roots from spreading. 2: Ash Tree which is on the boundary and 3 meters from the garage. This tree has a large number of branches expanding over the garage roof and also a large number of roots expanding towards the garage foundation. The tree surgeon has advised that this tree should be trimmed and have a haircut. This will protect the garage roof and slow the expansion of roof and provide safety.

T1 - Large eucalyptus - To fell and stump grind. Reason: Too excessive for the area and is causing damage to the wall that is nearby and it is non native to this country; T2 - Group of sycamore trees X3 that over hang the garage boundary of 167 New London Road. Prune it back by 2m. Reason: So they do not over hang into her garden and garage as they are nearly touching the garage roof.

Tree number - G1 Tree type - Elder and Honeysuckle Approx Height - 8m Location - Left hand boundary, to side of garage Service - Crown Reduction Work required- Prune all overhanging growth hard back to clear garage roof. Reduce height to match neighbouring hedge removing approximately 2-2.5m. Reason - As per customers wishes, To clear structure and ease future maintenance

Notification of intention to remove 2 no. lowest laterals (10-15cm diameters) on the northern sector, reduce north sector to give a 2m gap from the adjacent garage roof and reduce east by 1m (back from wooden boundary fence line on the east side of the footpath) on 1 no. London Plane (T45). Reduce north sectors to give a 2m gap from the adjacent garage roof, crown lift by up to 3m (above ground level) and crown thin by 10% on 1 no. Lime tree (T62) and 1 no. Sorbus spp. tree (T63).

11 No. Conifers - reduce in height to match ridge height of adjacent garage roof, cut back sides upto 1m Goat Willow - reduce height by approx 2.5m and spread by 2m Contorted Willow - Reduce height by approx 2.5m and spread by approx 1m Flowering Crab-apple - Reduce to obtain an end height of 2.5m and spread by 0.5m Group of mixed variety trees - Reduce height as shown in photo and reduce sides back to boundary of lawned area Pine Tree - remove lower primary branch as shown in photo Laurel Hedge - trim height and sides as previously undertaken and illustrated in photo