Application for a non-material amendment (reduction in 2 storey rear extension) of 22/1261/HOUS - Erection of two storey extension to side and rear and new boundary wall

Prior approval notification for the erection of a single storey rear extension. The proposed extension would extend 8.0 metres beyond the original rear wall, have an eaves height of 2.2 metres and height to the ridge of 3.67 metres. Maximum height = 4m. Maximum eaves height = 3 metres (as extension would be within 2 metres of boundary). Footprint = 108 sq.m. All materials to match that of the existing dwellinghouse.

Erection of a single storey rear extension, car port to side and reinstatement of northern boundary line and former driveway encompassing existing gate access & change of use of section of field to increase residential curtilage (Application to vary condition 2(approved plans) of planning approval 19/01737/FUL to alter the design of the extension)

Erection of first floor extension to rear, extend the ground floor to the side boundary wall on the West side approx 2m and add 4 number Velux windows to the front of the property.

Erection of single storey rear extension to the full width of the property giving a kitchen extension and 3rd bedroom. The maximum extended distance from the original existing rear wall will be 5 metres externally. (There was an existing wooden structure at the rear of the property which is included in the extent of the property shown on the Ordnance Survey plan but which has since been removed). The hipped part of the original roof will be extended forwards and is not higher than 4m with an eaves height of 2.5m. The highest part of the roof is not this hipped part. The rest of the extension will be flat roofed and at the boundary will be 2.5m high.