Prior Notification (Householder) - Cavity wall construction, concrete pantile roof single storey extension.

Prior Notification (Householder) - Single storey flat roof rear extension to provide self contained annex. Construction methods will mirror existing house

Prior Notification - Enlargement of a dwellinghouse by construction of additional storeys - New upper first floor with flat roof

Application for prior notification for the construction of a steel framed roof/building to house cattle and store manure

Prior Notification for erection of two additional storey's to provide 14no. one bed flats on the existing detached building together with secure bicycle spaces and refuse storage and associated works proposed under Class AA(1) (a) Engineering operations reasonably necessary to construct the additional storey's and new dwellinghouses, (b) works for the replacement of existing plant or installation of additional plant on the roof of the extended building reasonably necessary to service the new dwellinghouses, (c) works for the construction of appropriate and safe access to and egress from the new dwellinghouses and existing premises in the building, including means of escape from fire, via additional external doors or external staircases, (d) works for the construction of storage, waste or other ancillary facilities reasonably necessary to support the new dwellinghouses. For its prior approval to: Transport and highways impacts of the development, Air traffic and defence asset impacts of the development, Contamination risks in relation to the building, Flooding risks in relation to the building, The external appearance of the building including the design and architectural features of the principal elevation, and any side elevation that fronts a highway, the impact of any works under sub-paragraph (1)(c) or (d) of Class AA as set out above, The provision of adequate natural light in all habitable rooms of the new dwellinghouses, Impact on the amenity of the existing building and neighbouring premises including, overlooking, privacy and the loss of light, Impacts of noise from any commercial premises on the intended occupiers of the new dwellinghouses, Impacts of the introduction of, or an increase in, a residential use of premises in the area on the carrying on of any trade, business or other use of land in the area.

Prior notification for the construction of an upward one-storey extension with roof access to the...

Prior Notification - Livestock winter quarters, rainwater harvesting equipment pad and small plant building to support water and electrical infrastructure. Livestock bulding: Agricultural building. BS 5502-Class 2. 30x12m proposed mono-pitch with a total height of 7.8m and eaves height of 5.2m. Pre-cast concrete panels at base of building to 1.8m high, with open Yorkshire boarding to eaves. Southern aspect of building open for 4/5 6m bays with eastern most bay enclosed with cladding as above. Building will be constructed to standards able to accept solar panel array on roof. Hardstanding: Included proposal for recycled aggregate hardstanding between unclassified road Butchers Lane and building to facilitate access in winter months, shown on plans alongside building, constructed of recycled concrete sub-base and recycled asphalt top, concrete apron to unclassified road to be included in access works. Rainwater harvesting equipment pad: Additional small concrete pad to west of building will house rainwater harvesting tanks, of black plastic construction 3.5mx3.5m cylinders shown on detail plan. Utility building: 4x5m grey blockwork construction mono-pitched building, 2.4m to low eaves and 15% roof pitch, insulated for condensation control with single pedestrian access to east, to north of livestock building suitable to house water distribution infrastructure to support livestock operation as well as electricity infrastructure to support solar panel deployment to roof of livestock building.

Prior Notification (Agricultural) - Livestock winter quarters, rainwater harvesting equipment pad and small plant building to support water and electrical infrastructure. Livestock bulding: Agricultural building. BS 5502-Class 2. 30x12m proposed mono-pitch with a total height of 7.8m and eaves height of 5.2m. Pre-cast concrete panels at base of building to 1.8m high, with open Yorkshire boarding to eaves. Southern aspect of building open for 4/5 6m bays with eastern most bay enclosed with cladding as above. Building will be constructed to standards able to accept solar panel array on roof. Hardstanding: Included proposal for recycled aggregate hardstanding between unclassified road Butchers Lane and building to facilitate access in winter months, shown on plans alongside building, constructed of recycled concrete sub-base and recycled asphalt top, concrete apron to unclassified road to be included in access works. Rainwater harvesting equipment pad: Additional small concrete pad to west of building will house rainwater harvesting tanks, of black plastic construction 3.5mx3.5m cylinders shown on detail plan. Utility building: 4x5m grey blockwork construction mono-pitched building, 2.4m to low eaves and 15% roof pitch, insulated for condensation control with single pedestrian access to east, to north of livestock building suitable to house water distribution infrastructure to support livestock operation as well as electricity infrastructure to support solar panel deployment to roof of livestock building.

Prior notification of demolition for The existing detached modular classroom of approx. size 60 sq metres, of timber frame construction with infill panels, pitched felt roof, timber doors and UPVC windows. Internally it comprises one classroom along with circulation space and small storage areas. One of these storage areas was previously a toilet, which was removed and the drainage capped off some years ago.

Prior Notification: Construction of Single storey flat roof extension with parapet and roof lantern with height to eaves of 2.75m, maximum height of 3.5m and total projection from rear wall of original dwelling of 3.75m