Variation of condition 2 (materials) and 8 (Approved Plans) of application PL/20/3846/FA (Conversion of existing garage into living space and existing living space into garage, single storey, two storey bay window, porch and 2 gable end roof extensions to front, single storey rear extension, first floor rear/side extension, rear dormer window, 1 front, 2 side and 3 top rooflights, all new windows and doors, new rendering, front boundary fence, pillars, pedestrian and vehicle gates, new driveway and relocation of existing vehicular access) to allow for the amendments to the front boundary including relocation of pedestrian gate and confirmation of the pro

S73 variation of condition 2 (Approved plans) of planning permission S/1137/19/FL (Single storey side extension replacing lean-to two storey bay windows to side conservation roof lights to serve stair and en suite side extension to existing garage alterations to garden and parking layout and 1.8 metre boundary fence).

Variation of condition 2 (approved plans) of planning permission PF/21/3130 (Conversion of attached barn to annexe and insertion of roof lights) to allow changes to (1) kitchen roof, (2) chimneys, (3) west boundary fence, (4) permanent link between barn annexe and cottage & (5) permanent link between north and south sides of first floor

Variation of condition 2 pursuant to planning permission DM/19/03150/FPA for amendments to external staircase from upper balcony, garage side door omitted, boundary wall adjacent to garage door amended, amendments to drainage and external works layout around perimeter of building, garden room side extension added, circular sunken patio added, staircase to sunken patio added, garden room patio door increased in width, boundary fence added, roof windows added and amended, en-suite bathroom window omitted and TV shutter added in lieu, amendments to cladding layout and colours, garden room kitchen window added, external WC + washroom added to side elevation, amendments to ground levels, balcony balustrading amended, wall cladding to garage added.

Variation of condition 18 (approved plans) of planning application reference PL/22/1796/VRC that varied planning permission PL/22/0466/FA (Demolition of bungalow and garage and erection of detached dwelling with new access and drive position with surface parking and boundary fences) increasing the height of the roof, the width of building and width and depth of single storey side element, to allow a further variation to include roof lights on side and rear elevations and second floor windows in apex of rear projections

Variation of condition 17 (approved plans) of PL/22/0466/FA (Demolition of bungalow and garage and erection of detached dwelling with new access and drive position with surface parking and boundary fences) to increase roof pitch and width

Minor material amendment (S.73) to vary condition no.2 (approved plans), seeking to allow changes in the first floor design, in pursuant to planning permission reference 216171FUL dated 21/12/2021 for'' Conversion of the existing property into four self-contained residential units, with associated cycle storage, refuse storage facilities and amenity space; alteration of roof from hip to gable end; rear roof extension incorporating two Juliet balconies and installation of three roof lights to front roof slope; single storey side/rear (wraparound) extension (following demolition of existing outbuildings and front addition); first floor side/rear extension; alteration to side and rear fenestration; erection of boundary wall and fences alteration to front of property include involving hard and soft landscaping; alterations to the roof of front projecting element and partial demolition of single story front projection and chimney stack''

Minor material amendment (S.73) to vary condition no.2 (approved plans), seeking to allow changes in the first floor and roof design, in pursuant to planning permission reference 216171FUL dated 21/12/2021 for'' Conversion of the existing property into four self-contained residential units, with associated cycle storage, refuse storage facilities and amenity space; alteration of roof from hip to gable end; rear roof extension incorporating two Juliet balconies and installation of three roof lights to front roof slope; single storey side/rear (wraparound) extension (following demolition of existing outbuildings and front addition); first floor side/rear extension; alteration to side and rear fenestration; erection of boundary wall and fences alteration to front of property include involving hard and soft landscaping; alterations to the roof of front projecting element and partial demolition of single story front projection and chimney stack''

Part demolition of an industrial shed and the erection of a light industrial building (Class E(g) (iii)) comprising 7 units with associated parking and landscaping (revised scheme of 20/01497/FUL) (Removal of condition 5 (material and colour of the perimeter wire mesh metal fence) and variation of conditions 2 (approved plans), condition 6 (landscape details plan), condition 14 (parking layout plan) and condition 15 (cycle parking plan) to allow the retention of the existing 2 metre palisade boundary fence to the application site, to ensure that the reference is made to the revised plans, to amend the proposed roof pitch from mono-pitch to a duo-pitch roof, omission of the smoking shelter, correction to plans showing the position of the fire escape doors and retention of the existing concrete yard

S73 variation of condition 2 (Approved plans) of planning permission 21/00251/HFUL (Single storey garage extension, conversion of dormer roof to full gable to allow inclusion of Juliette balcony and masonry extension to create detail around gable, Single storey Porch extension. Front Elevation amended to Render and small amount of boarding. Adding of 0.6m Trellis to side boundary upon existing 1.8m fence) for Minor changes to the planned work including 1. To front porch remove tiles to roof area and replace with Millboard cladding - Limes Oak, 2. To the front gable elevation inset area, remove render and replace with Millboard cladding - Limed Oak, 3. To the new gable roof add 2no Velux roof windows, 1no. to both the south and north elevations, and 4. To the north elevation ground floor, move small window to the other side of the new side entrance door to the boot room.