A limb of a multi-stemmed Lime tree failed and fell on the garage roof of a residential house. I have cleared the fallen stem but would like consent to coppice the remainder of the tree to ground level as I am concerned from a safety perspective due to decay in the base.

T1. Crable Apple, Fell. T2, Dead Scotts Pine, Fell T3, Sycamore, Fell T4 Crown Lift to to alow 1m clearance from Garage Roof. Clear limbs from phone cable

Acacia and Sycomore as seen on plan cut back low branches over garage to give 2metres clearance to prevent roof damage (Map attached).

Willow tree (T1) on land behind swan public house, between garage and back of no4 chapel square. Tree is possibly in preservation area. Now needing up to 50% reduction to crown, including height, as it is over hanging roof of no4 so potential risk of storm damage. See location plans and photos attached.

1. Large fir trees along boundary to business park drive (coloured blue on sketch). These are part of a double row - the other half is owned by the business park and the trees were reduced in height around 2 years ago. Following last years' storms two trees on the other side of our boundary fell and we should like to reduce the 14 on our side by approximately half their height (still leaving them around 15 ft tall, to prevent risk of breakage in high winds in future and also to improve lighting to our property 2. Fir trees coloured green on sketch and leylandii (not coloured but running in line to garage). These were reduced in height two years ago but only by a small amount. High winds last year created some damage with falling branches breaking fences on both sides and we are concerned that future storms may bring whole trees down. In addition, the owners of the business park say that the branches on their side are potentially causing damage to vehicles parked there. We propose to reduce height by 15-20 ft (the trees are around 45ft high) and also to reduce thickness of growth on the far side. 3. Poplar trees coloured in dark blue. These were reduced two years ago but the contractors did not remove as much as requested (or granted) at the time and we are still concerned by the prospect of trees falling in high winds. We should like to do additional work , reducing height to just below the level of the roof of the main house 4. Mulberry Tree (coloured pink) -to reduce it in height by probably 2-3m so that it is slightly higher than what is left of the firs behind, allowing it some additional light. 5. Eucalyptus tree (purple) - lost some high branches in high winds - to be reduced and re-shaped for safety (about 10ft removed, leaving it at around 20ft high) 6. Fir tree at edge of garden (yellow). The reduction would be approx. 4m, in line with the above, potentially with up to 15% thinning of the lower

. Walnut (T4) - the lower limbs / branches are now sagging to the extent that in a number of cases the ends touch the ground. We requesting approval to crown lift up to 3 metres from the ground 2.Copper Beech (T7 ) - one limb has grown to the extent if now significantly overhangs the garage ( actually touches the garage roof so risk of damage) and a second limb is extending towards the house . Request approval to prune back by 2 metres the limkb overhanging the garage and prune back by 2 metres growing towards the house