Crown Lift (to 3.5m) of 1no. Silver Birch Tree (T1) within Tree Preservation Order 24/2014. Crown Lift (to 5m above the car park), Lateral reduction (to north towards no.21 by 1m and retaining 4m radial branch spread), Crown Lift (to 5.5m above Waterside) and Crown Lift (to 2m above garage roof) of 1no. Sycamore Tree (T4) within Tree Preservation Order 86/2008.

Works to 1 no Hornbeam of Tree Preservation Order No. 37/2019 Reduce the lateral branch spread extending over the parking area by 3 meters (to retain 4 meters) and lift above the neighbouring garage roof to 1 meter vertical clearance

Works to various trees within Harrogate Conservation Area. The schedule of work proposed is as follows: T1 Oak - crown lift to 5 1/2 meters. T2 Plum - remove the branches supporting purple coloured foliage to retain the 'type' green foliage. T3 Silver Birch - crown lift to 5 meters. T4 Silver Birch - reduce back lateral branch spread by 2 meters to boundary to clear the garage roof. T5 Crab Apple - reduce canopy dimensions by 2 meters height and spread to retain 3 meters height and 2-3 meters radial branch spread. T6 Oak - reduce back lateral branch spread by 2 meters to east to retain 3 meters radial spread. T7 Silver Birch - reduce height by 3 meters and reshape retaining 6 meters height and 3 meters radial branch spread . T8 Hazel - coppice to 0.5 meters.

1 no. Lime tree (T1): crown lift over footpath to give clearance of 2.5m and reduce laterals by 0.5m to give clearance over highway. 1 no. Lime tree (T2): crown lift over footpath to give clearance of 2.5m, reduce laterals by 0.5m to give clearance over highway and prune limb over garage roof by 1m to give 1m clearance of roof. 1 no. Conifer tree (T3): fell. Within Tree Preservation Order 17/1987

Beech (T1) crown lift to clear garage roof by 1.25m with Maximum pruning cuts 50mm. Within Tree Preservation Order: 10/1991

T1 (Ash) - prune low hanging branches to create a 2.5m ground clearance over site T2 (Sycamore) - prune low hanging branches to create a 2.5m ground clearance over site T3 (Sycamore) - prune low hanging branches to create a 3m ground clearance and 2m clearance from garage wall and roof T4 (Walnut) - prune low hanging branches to create a 2m clearance from garage / outbuilding walls and roofs T5 (Ash) - prune low hanging branches to create a 5m ground clearance for vehicular access

T1 Leyland Cypress - reduce branches that extend over garage roof back to the main stem T2 Lawson Cypress - reduce in height by 4 meters to 6 meters

T1: Birch, reduce extended leaders all the way around by 1.5m no cuts bigger than 40mm. T2:Mapple, lateral reduction from garage roof by 2m to give clearance. T3: Rowan, remove to ground level. remove stump and replace like for like new tree. T4 :Cherry, reduce extended leaders to help reduce wind load. reduction of 1.5m maximum cut 35mm. T5: Copper Sycamore, 3m clearance from the property and 2.7m crown lift to allow foot traffic past in the garden.

Prune 3 Cherry trees: Crown lift all round by 2.5 meters from ground level so the hedge is fully visible and good clearance over lawn area. Crown thin the canopy by 15% to let light and air penetration through canopy. Reduce in height and spread by about 2-3 foot to contain and shape. Prune Cherry x 3 group located at the side of house according to the following specifications: Crown lift all round by 3 meters from ground level to clear road/drive/path. Remove dead wood and snapped branch stubs throughout the canopy. Pruning Crown thin the canopy by 10% to let light and air penetration through canopy. Reduce away from house side by 1.5 meters to give good clearance to house and reduce away from garage roof to give 1 meter clearance. Reduce in height by 1-1.5 meters to contain.