1 - Reduce bay laurel -2 - Cut back overgrown fig- 3 - Reduce laurel to 3ft- 4 - Reduce 1 x cotoneaster- 5 - Winter prune 5 x apple trees- 6 - Raise holly over shed- 7 - Remove line of small yew trees

Limes - Group 1 - Reduce over extending branches on east side of canopy to maintain clearance from garage. Crown raise to approximately 4m to maintain clearance over driveway. Limes - Group 2 - Reduce over extending branches on south side of canopy to maintain clearance from house. Crown raise to approximately 4m to maintain clearance from shed.

Common Walnut (T1) Co-Dominant Fork, Old Pruning Wounds, Stem Defect, Low Branches Cut back branches off shed. Raise to 3m.

MAIN APPLICATION TREE WORKS 1 1, T1 & T2 - Copper Beech trees - in front garden next to the road. Aim - to lift the crown - clean and clear dead wood with a reduction of 10% 2, T3 - Norway Maple - drive way. Aim - to lift the crown, reshape/balance (currently lopsided) crown clean with a reduction of 10% 3, G1 - rear garden area 2 poor quality Fir trees next to the garage, west side of garden Aim - remove. 1 poor quality Fir tree beneath the Holm Oak, west side of garden Aim - remove Unidentified Evergreen tree - between Holm Oak and Silver Birch - west side rear garden. Aim - Crown reduction to reduce the overall size and shape thus allowing more light to the Silver Birch Tree. A reduction of 5ft. Silver Birch Tree - rear garden Aim - Crown clean to remove dead and dying wood to prolong life of the tree. Eucalyptus Tree - east side of garden Aim - Crown reduction by 10-15% its height and proximity to our eastern boundary. It's height has become a concern to our elderly neighbour at no 76a. Elder tree - east side of garden adjacent to neighbour no 78 fence and shed. Aim - remove as dead. We intend to plant new trees once the works have been completed. Currently we have 2 new apple trees and a Persian Ironwood tree to be added to the garden in G1. We are liaising with our arborealist about sourcing suitable trees.

T1 Oak crown raise and clearance over shed

T1 - Scots pine - mature tree , reduce lowest branch back to closest pruning point to main stem. The low branch is getting close to power line and causes lots of shadow for area, the tree would also look good for the branch reduction as the overall form and stem could be appreciated more T2 - Goat willow- small tree, around 5 meters in height, previously pollarded . Remove tree to ground level. Tree is very close to shed and has/will soon outgrown its location, roots found in drains which may become a problem in the future as it matures T3 - Silver Birch- medium size tree - remove small lower branches of around up to 5cm dia . 2 branches to remove to crown lift to height of 4-5 meters

We wish to fell a Leylandii, approx height 25ft, approx spread 20 feet, shown in black on sketch. It is growing very close to and shading out established hazel trees and some fruit trees planted within the last 5 years. The lowest branches are less than 1 foot from the ground, preventing vegetation and providing dense cover for rats. There is no wildlife value, unless you count the rats. There are 40 other trees on the site, mostly established native deciduous species including oak; horse chestnut; lime; hazel; sycamore; ash; rowan; willow. We have also planted a range of fruit trees including apple, cherry, plum and walnut. The plot is on the other side of the A149 from our house. The sketch shows the approx 0.5 acre section in which the tree is growing. The remaining 0.2 acres consists of a parking area, shed and vegetable garden. There are no trees in this area. We will replace the felled tree with an appropriate native tree of higher wildlife value e.g. a rowan.

Removal of x1 Eucalyptus tree I have asked the permission of the next door neighbour, who currently has two "mechanically" broken vehicles residing directly under the trees overhanging branches, they have agreed and as long as the vehicles can be moved, I'd like to seek the permission of the local authority to remove this tree. Tree is not native to the UK and is prone to branches snapping and the array of branches look unsafe, and it would be sensible for the tree to be felled before replacement of the shed and using the drive for vehicles. the previous occupant parked her small smart sized vehicle right up against the front door. As a new occupier i need to use the driveway. There is no set off or parking available on the highway. I have included photos to show the trees position and the state of the branches. I do not wish to replant any tree as there are already substantial trees to the east and west of it's location along the rear and side property boundary, also this current tree within 5 meters of the neighbouring property.

Front garden: Pine tree; Reduce height to below telephone wire, Rear garden: 2 Sycamore trees on boundary in neighbouring property, Tree 1 beside the shed; Crown lift 2 lower limbs, Tree 2 beside the greenhouse; Crown lift storm damaged limb, Crown lift 4 small limbs over the greenhouse, Yew Tree on boundary in neighbouring property; Crown lift 4 limbs and Tree next to Eucalyptus tree (species unknown); Remove low large limb and dead wood the tree

T1 - Yew, reduce by 50% as first part of phased reduction. Currently trimmed as a hedge on west side, but allowed to grow out in all other directions. Phased reduction planned over two growing seasons to create normal form, T2 - Blackthorn, reduce from 6m down to 2m to allow regeneration, T3 - Holly, reduce from 6m down to 2m to allow regeneration, T4 - Cypress, 6m, fell, T5 - Blackthorn, 4m, fell. Leggy and in contact with shed roof, T6 - 2 x hazel stools, coppice, T7 - Sycamore, remove dead wood and crown lift to 4m, T8 and T9 - 2 x hollies, reduce from 7m down to 2m to allow regeneration.