T1. Sycamore RHS rear garden. Crown Reduction. Reducing the height and spread of the tree by up to 5 metres. (Back to previous points of reduction). Remove central (thinnest stem of 3). All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth. Height pre works 17m post 12m. Crown spread pre works 10m post 6m

T1. Beech (neighbours tree, tag no.0795) - Included main union at 3m where trunk divides into two co-dominant stems. Reduce the lateral spread of the canopy overhanging the rear gardens by up to 3 metres. No height to be taken out of the tree. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth. Any major deadwood (over 25mm diameter) above the gardens is to be removed too. T2. Sycamore (neighbours tree, tag no.0796) - Suppressed tree with squirrel damage. Reduce overhanging encroachment back to boundary line and raise canopy over rear garden of no. 11 Charlwood Place to provide 3m ground clearance. Reduction of lateral canopy spread over private gardens to allow more light into properties. 19x12m to 19x9m.

T1. Plum group front boundary - Crown Reduction. Reducing the height and spread of the tree by up to 2 metres. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth 8x7m down to 6x5m encroaching on drive entrance 11. Yew rear garden of 23 - Crown Reduction. Reducing the height and spread of the tree by up to 1 metre. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth

T2. Bay front boundary - Crown Reduction. Reducing the height of the tree by up to 2 metres and shape as necessary. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth 8x6m down to 6x4m to allow light into front of property T3. Maple in neighbours RHS - Clear phone line by 1 metre 14x7m tree - to clear phone line T4. Line of Thuja trees in neighbours RHS - Seasonal trim side only, removing one years growth 14x5m line of approximately 5 trees - works to reduce the encroachment over the driveway T5. Lime in neighbours RHS - Reduce encroachment towards building by 1.5 metres 18x9m tree - works to reduce encroachment towards building from the lower canopy. Ensuring 2 metres clearance T7. Damson rear garden of 25 - Crown Reduction. Reducing the height of the tree by up to 2 metres. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth 6x4m down to 4x4m works to tidy and balance the tree T8. Various in neighbours front LHS - Reduce encroachment to boundary line T9. Purple Plum rear garden of 23 - Crown Reduction. Reducing the height and spread of the tree by up to 2 metres. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth 8x6m down to 6x4m works to reduce the encroachment towards the building and garage T10.Thuja rear garden of 23 - Crown Reduction. Reducing the height of the tree by up to 6 metres and laterally by 1 metre. Various works to allow further light

-1. Cypress trees (LHS, neighbours trees) - Reduce encroachment to boundary line down length of garden and all the way up to the top of each tree. Including self seeded sycamore.12x7m pre work. 12x3.5m post work. To allow more light into garden and distance between trees and dwelling. -2. Purple leaf plum x2 (rear garden) - Reduce the height and spread of each tree by up to 1.5m and reduce laterals to shape and balance accordingly. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth.7x3m pre work. 5.5x2.5m post work. Young tree maintenance and to allow more light into garden and property. -3. Acuba & Holly hedges (front garden) - Seasonal trim top and side, removing one years growth. Try to trim as individuals with rounded tops. -4. Cypress x2 (front garden) - Fell to as close to ground level as possible and grub out stumps.4x1m. To create more space at driveway entrance -5. Portuguese laurel (front garden) - Reduce the height and spread of the tree by up to 2 metres to achieve a rounded 'ball' shape, ensuring canopy overhang over path and pergola is removed. Reduce back from gate to improve access. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth 5. Portuguese laurel 6x8m pre work. 4x6m post work. To create more space at driveway entrance; remove overhang from adjacent footpath; and to allow more light into property. -6. Yew (front garden) - Seasonal trim side that overhangs footpath, removing one years growth

1. Larch rear garden - Ganoderma at base and decay at 4 metres on main stem, Carefully dismantle to as close to ground level - 20m Tree extensive decay at base. 2. Yew rear garden - Crown Lift to provide 3 metres clearance from ground level on eastern canopy and reduce the low branches to the east and south by half a metre 9x7m Tree lift works to allow light underneath. 3. Oak rear garden - Crown Lift to provide 5 metres clearance from ground level - 18x16m Tree. Works to allow light underneath 5. Old Chestnut stump - Coppice at ground level and remove basal growth on adjacent Chestnut Regrowth from an old stump. 6. Sycamore rear LH corner - Remove basal growth - 18m tall tree. Works to allow access underneath. 7. Hazel rear garden LHS - Coppice at ground level 4m stool. Works to regenerate old coppice. 9. Beech rear LHS - Reduce the northern canopy by 1-2 metres and crown lift to provide 5 metres clearance from ground level. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth - 18x15m Tree works to reduce shadowing over lawn. 10. Hazel rear LHS (dead tree) - 7m stool dead. 12. Yew rear LHS - Crown Lift to provide 3 metres clearance from ground level 9x7m works to allow light underneath

T1. Mixed species-Reduce encroachment over road to boundary line up to Cypress hedge. Remove self-set Sycamore from behind garage.Various species ranging from 6-8 metres tall. Approx. 1 metre to be removed. Works to allow light to adjacent road to prevent moss on the tarmac T2. Cypress hedge-Reduce height of hedge by up to 2 metres to previous points and trim both sides 7-metre-tall hedge down to 5 metres tall T3. Lime x 2 - Remove major deadwood greater than 20mm diameter and raise crown to provide 6 metres clearance from ground level 18x12m trees works to clear garage roof and lift over road T5. Bay - Reduce height 2 metres and trim garage side 8x5m down to 6x4m encroaching on garage T6. Beech - Crown Reduction. Reducing the height and spread of the tree by up to 2 metres. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth 14x8m down to 12x6m works to maintain size due to location on top of wall T8. Field Maple x 2 -Remove major deadwood greater than 20mm diameter and raise crown to provide 6 metres clearance from ground level, sever Ivy at base 15x10m trees lifting works over access drive and road T9. Mixed species - Reduce / trim all over to previous points (all to be varied in height) and remove dead trees from within Various ranging from 7-9 metres tall. Works to maintain size due to location on top of wall T10. Hornbeam x 2 and Beech - Crown Reduction. Reducing the height and spread of the tree by up to 2 metres. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth 18x12 down to 16x10m to allow light into the garden T11. Dead Elms - Fell to as close to ground level as possible 6m tall dead Tree T13. Apple - Prune by up to 2 metres 7x6m down to 5x4m pruning / maintenance works T14. Mixed species rear boundary-Reduce encroachment towards garden by up to 1 metre 8x7m down to 8x6m encroaching on house.

AMENDED SPECIFICATION FOR T3 SEE CONDITION 2 T1. Chestnut front boundary - Crown bias to the north. I would recommend a Crown Reduction. Reducing the height of the tree by up to 2 metres and the northern canopy by up to 1 metre and reduce the protruding limb to the west by 2 metres. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth. 17x12m down to 15x11m works to balance and tidy the tree following the loss of the adjacent tree in previous storm. T2. Lime front boundary - Historically been reduced with approximately 6-7 metres regrowth from old points with obvious decay at these points, I would recommend a Crown Reduction. Reducing the height and spread of the tree by 3-4 metres. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth. Raise crown over road to provide 5 metres clearance from ground level by the removal of secondary and sub-branches. 20x15m down to 16x12m works to alleviate the stress on the old decaying pruning points and allow light into the front of the property. T3. Cedar front boundary - Crown Thin. Removing selected branches in the upper canopy to reduce current density by up to 15% remove broken / damaged branches and major deadwood greater than 20mm in diameter. Raise crown over road to provide 5 metres clearance from ground level by the removal of secondary and sub-branches. 18x12m tree. works required to prevent further storm damage

T1 Common Horse Chestnut Crown Reduction - Reducing the height and spread of the tree by up to 8 metres. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth. To be reduced substantially due to decay to base of stem to South. Height pre works 17m post works 9m. Crown spread pre works 8m post 8m

T1 Lime x 2. Crown reduce to the previous crown reduction points removing approximately 3 metres and remove major deadwood greater than 20mm in diameter. Remove basal growth parking side only. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth and shall not exceed beyond the previous crown reduction points 18x13m down to 15x10m to allow light in to property.