Details of Condition 4 (detailed drawings of new joinery) pursuant to planning permission ref no. 23/AP/0889 - Variation of Condition 1 'Approved Plans' of planning permission ref. no. 22/AP/3564: Alterations including amalgamation of existing studio flat back into single dwelling house; internal reconfiguration works; alterations to existing rear extension including addition of rooflights and changes to rear fenestration with formation of single large opening and new cladding; rendering of exposed brick lintel detail to first floor rear elevation, replacement of existing single glazing to windows with Mono Histoglass glazing. Variation sought: Minor changes as follows: -Omit a 750mm x 2200mm new rooflight, and install an approx. 750mm x 3300mm new rooflight to the modern flat roof extension. -Omit a 750mm x 2200mm new rooflight, and install an approx. 800mm circular rooflight and the location adjusted. -The new metal frame double glazed doors to the modern flat roof extension have been revised in opening method only, to be sliding instead of bi-fold doors. -Removal of a modern masonry wall beside hallway to be replaced with partition at upper ground floor level

Variation of Condition 1 'Approved Plans' of planning permission ref. no. 22/AP/3564: Alterations including amalgamation of existing studio flat back into single dwelling house; internal reconfiguration works; alterations to existing rear extension including addition of rooflights and changes to rear fenestration with formation of single large opening and new cladding; rendering of exposed brick lintel detail to first floor rear elevation, replacement of existing single glazing to windows with Mono Histoglass glazing. Variation sought: Minor changes as follows: -Omit a 750mm x 2200mm new rooflight, and install an approx. 750mm x 3300mm new rooflight to the modern flat roof extension. -Omit a 750mm x 2200mm new rooflight, and install an approx. 800mm circular rooflight and the location adjusted. -The new metal frame double glazed doors to the modern flat roof extension have been revised in opening method only, to be sliding instead of bi-fold doors. -Removal of a modern masonry wall beside hallway to be replaced with partition at upper ground floor level

Variation of Condition 1 (Approved Plans) pursuant to planning permission 21/AP/1122 for 'Demolition of the existing buildings and construction of a new part four, part three and part two storey building facing Alice Street, a three storey terrace with mansard level and re-use of existing basement facing onto Tower Bridge Road, to provide 9no. residential dwellings (Use Class C3) and a retail unit (Use Class E(a)).' The amendment includes the following: - propose infill between house 2 and 3 set back from courtyard elevation to provide walk-in closet; - relocate ASHP in house 1 onto the flat roof in concealed location besides the consented brickwall; - position consented south-facing 2/F window 835mm to the right for house 1; - reduce perimeter wall adjacent to Capacity House and Nos. 87 & 89 TBR to nominal 2-3m from proposed site datum level

Variation of Condition 11 (Tree Planting) pursuant to 19/AP/1941 [Demolition of the existing detached dwelling and construction of x4 houses (two pairs of semi-detached houses) comprising basement, ground, first and second floor attic levels and associated landscaping and parking for up to two cars per dwelling] The amendment seeks the removal of x 2 existing Dead Trees to be replaced with 1 x Holly (Ilex aquifolium Van Tol) and 1 x Golden Elm Tree ( Ulmus × hollandica 'Wredei') on the north western boundary.

Resubmission of detail of Condition 5 Part (i) (Disabled Access -to provide redefined design to the access lane) pursuant to planning permission ref: 21/AP/0200 granted for: 'Variation of Condition 1 (Approved Plans), 6 (Cycle storage), 8 (Materials) and 10 (Basement Impact Assessment) of the planning permission 18/AP/2912 dated 20/02/2019 (which was a 'Variation to Condition 1 (approved plans), to planning permission 15/AP/0912, dated 27.05.2016 (which was a variation to condition 1 (approved plans ) of the planning permission 13/AP/1662 dated 13.12.2013 for 'Redevelopment of site to the rear of 55-67 Upland Road involving the demolition of existing light industrial workshops (B1) and the erection of a 2 bed single storey dwellinghouse and detached habitable room (3rd bed), with access along the side of 67 Upland Road.') to allow the following alterations: - Revised basement and ground layout and roof geometry - Removal of Condition 6 (Cycle Storage) - The external materials similar to approved with green sedum roof, metal glazed facade with the addition of timber pergolas and - Screens, and painted masonry external walls around the boundary. - Revised Basement Impact Assessment'

Partial Approval of Details of Condition 4 (re: stone bay details) required by planning permission 19/AP/1788 Variation of Condition 1 - Approved Plans - as required by planning permission 14/AP/3104 (Redevelopment of the site to include the demolition of all existing buildings (Use Class B2) and the excavation and removal of fuel tanks and associated supply lines and the construction of 12 dwellings (Use Class C3), 1 x 2 bed and 2 x 1 bed affordable dwellings, 1 x 3 bed house (affordable, wheelchair accessible dwelling), 4 x 4 bed houses and 4 x 5 bed houses with ancillary living accommodation and car parking at basement level accessed from Gilkes Place and landscaping.)

Variation of Condition 1 (Approved Plans) pursuant to planning permission 18/AP/1603 for 'Redevelopment to create two levels of basement and the erection of five buildings ranging from seven to 34 storeys plus plant (heights ranging from 28.9m AOD 123.9m AOD) to provide: 341 dwellings (Class C3); 8,054sqm (GIA) of office space (Class B1); 1,436sqm (GIA) of retail floorspace (Class A1-A4); 904sqm (GIA) of cultural floorspace (Class D1/D2); 16,254sqm (GIA) hotel with up to 126 rooms (Class C1); new open space; reconfigured vehicular and pedestrian access; highway works; landscaping; basement car park for 107 cars (including 29 disabled car parking spaces), plus servicing and plant areas; and works associated and ancillary to the proposed development'. The proposed amendments include: increase in height to 15 (equivalent) storeys; increase in Class E floorpsace; amendments to detailed design, scale and massing; enabling works; servicing; public realm and other associated changes ancillary to the development.

Variation of Condition 1 (Approved Plans) of planning permission ref. no. 21/AP/0200 for: (Variation of Condition 1 (Approved Plans), 6 (Cycle storage), 8 (Materials) and 10 (Basement Impact Assessment) of the planning permission 18/AP/2912 dated 20th February 2019 (which was a 'Variation to Condition 1 (approved plans), to planning permission 15/AP/0912, dated 27.05.2016 for 'Redevelopment of site to the rear of 55-67 Upland Road involving the demolition of existing light industrial workshops (B1) and the erection of a 2 bed single storey dwellinghouse and detached habitable room (3rd bed), with access along the side of 67 Upland Road.') to allow the following alterations: - revised basement and ground layout and roof geometry - removal of Condition 6 (Cycle Storage) - the external materials similar to approved with green sedum roof, metal glazed facade with the addition of timber pergolas and - screens, and painted masonry external walls around the boundary. - revised Basement Impact Assessment) to allow the following changes: -Refinement of the design of the previously approved rooflights, reducing them in size, omission of a rooflight over staircase and addition of a small rooflight over the utility room.

Variation of Condition 1 (Approved Plans) pursuant to planning permission 21/AP/1567 granted on 12/08/2021 for: (Minor material amendment to plans of the previously approved planning permission ref: 20/AP/1103 granted on 10/06/2020 for: (Demolition of existing single storey studio and construction of a new 2-bedroom house; together with construction of a single storey ground floor side return extension to existing dwelling house) to allow the following changes: -Installation of eighteen photovoltaic panels on the roof and of the same colour as the Zinc roof -Omission of all 7 windows from the gable end (i.e. side elevation) -Change two separate windows at each level of the rear outrigger in to a single window.

Variation of condition 1 (Approved Plans) pursuant to planning permission 21/AP/4724 for Construction of a part single, part two storey extension and lower ground and ground floor levels, and the enlargement of the existing front lightwell. Conversion of two flats into one dwellinghouse. The amendment includes the following: small amendments to the scheme including raising the floor heights and parapet heights. The parapet height is to match the neighbours extension raising it circa 150mm from the approved drawings. Condition Number(s): 1. The development shall be carried out in accordance with the following approved plans: 2129_010 P5 PROPOSED FLOOR PLANS; 2129_011 P5 PROPOSED ELEVATION AND SECTION PLAN; 2129_020 P2 FIRE STRATEGY 2. The development hereby permitted shall be begun before the end of three years from the date of this permission. 3. The materials to be used in the implementation of this permission shall not be otherwise than as described and specified in the application and on the drawings hereby approved unless the prior written consent of the local planning authority has been obtained for any proposed change or variation. 4. All windows on the side elevation of the ground floor extension, facing number 128 Grosvenor Terrace, shall be obscure glazed and fixed shut and shall not be replaced or repaired otherwise than with obscure glazing. The side wall of the ground floor extension facing 124 Grosvenor Terrace shall be of solid construction. Conditions(s) Removal: The client would like to make small amendments to the scheme, including raising the floor heights and parapet heights slightly for drainage reasons. The parapet height is to match the neighbours extension, which raises it circa 150mm from the approved drawings. Update condition 1( approved plans condition ) to include updated drawings