Variation of Condition 1 (Approved drawings) for full planning permission 21/AP/2183 dated 27/08/2021 for 'Extensions and alterations to the existing building to facilitate the reconfiguration of two existing self-contained flats to form 2 x 2 bedroom flats alongside a loft conversion and roof extension' to allow: i) The former shop frontage at ground floor which was previously proposed to be repaired and redecorated is now being replaced with a more suitable entrance to both dwellings. ii) Ground floor rear fenestration has been simplified. iii) Layout of flat 2 kitchen updated and area schedule updated. iv) Rear access path removed in favour of better internal environment to flat 1. v) Materials key updated to reflect changes proposed elsewhere.

Details of Condition 5 (Internal Noise Levels) pursuant to planning permission ref: 22/AP/2989 granted on 18/10/2022 for: (Variation of condition 1 (approved Plans) of planning permission ref: 19/AP/0084 granted on 26/11/2021 for (Retention of public house (Sui Generis use class) at the basement and ground floor, conversion of the upper floors to provide x1 two-bed flat and x2 one-bed flats (Use Class C3) (total: x3 residential units), including a second and third floor rear extension and minor alterations to existing window and door openings to side elevation, and provision of associated refuse facilities) -to allow the change in the material of the rear extension from clad timber slate to Zinc.

Details of Condition 4 (Validation test regarding the sound reduction and level of insulation) pursuant to planning permission ref. no. 22/AP/2989: Variation of condition 1 (approved Plans) of planning permission ref: 19/AP/0084 granted on 26/11/2021 for (Retention of public house (Sui Generis use class) at the basement and ground floor, conversion of the upper floors to provide x1 two-bed flat and x2 one-bed flats (Use Class C3) (total: x3 residential units), including a second and third floor rear extension and minor alterations to existing window and door openings to side elevation, and provision of associated refuse facilities) -to allow the change in the material of the rear extension from clad timber slate to Zinc.

Construction of L-shaped rear dormers extensions at the second-floor level, alteration to the existing fenestration, and internal alterations to 8 existing flats

Variation of condition 2 (Approved Plans) of planning permission ref: 19/AP/1375 granted on 26/07/2019 for: (Variation of condition 2 of planning permission 18/AP/0475 granted on 19/10/2018 for: "Retention and refurbishment of the existing front main part of the building except its main roof. Removal of all the rear parts and main roof of the existing building. Erections of 3-storey rear extension and mansard style roof extension to the existing building. Rationalise, deepen and extend the existing basement area. Change of use of the basement in the main building from storage to commercial (B1) unit of 130m2 and first floor offices to residential (C3). Reduction of existing ground floor offices from 110m2 to 74m2. Provision of five residential units (comprising 3x2B4P and 2 studio flats) in the proposed first, second and third floor with associated amenity space and separate cycle and bins storage area for both residential and commercial units. Installation of 8 solar panels on the main roof top of the building." to allow: - Alterations (including replacement of windows) to the ground floor shopfront on both Grange Road and Grigg's Place elevation) To allow the following: - a new staircase from the stair core in the centre of the building to the roof -a new glass dome over the proposed staircase and lift shaft

Details of condition 3 (Material Samples) pursuant to planning permission ref: 22/AP/2989 granted on 18/10/2022 for: (Variation of condition 1 (approved Plans) of planning permission ref: 19/AP/0084 granted on 26/11/2021 for (Retention of public house (Sui Generis use class) at the basement and ground floor, conversion of the upper floors to provide x1 two-bed flat and x2 one-bed flats (Use Class C3) (total: x3 residential units), including a second and third floor rear extension and minor alterations to existing window and door openings to side elevation, and provision of associated refuse facilities) -to allow the change in the material of the rear extension from clad timber slate to Zinc.)

Conversion of two flats to one single family dwellingouse; demolition of an existing rear extension and the construction of a new ground floor rear side extension; alteration to the existing dormer over the main roof and the construction of a new dormer over the outrigger; and alterations to the fenestration on the side elevation.

Change of use of part of the first and second floors (and roof terrace) from C3 residential to F1 non-residential, to form part of the Fashion and Textile Museum; changing the existing three bedroom duplex apartment on the first and second floors to a single level two bedroom apartment on the first floor only; and external alterations to the second floor and roof terrace, including infilling the existing window and door on the northern elevation and installing a hinged opening rooflight within the northern terrace and trellises to the southern and western roof terraces.

Details of Condition 4 - details of the secure and covered storage of cycles attached to planning permission 21/AP/0941 [dated 18.02.2022] for 'Construction of a part three and part two storey extension to the rear, comprised of a three storey rear extension to the main building and two storey side extension to the outrigger, to facilitate the conversion of the existing residential dwelling into three selfcontained flats (2 x 2B3P & 1 x 1B2P), with associated access, refuse and cycle storage arrangements complete with alterations to the fenestration at the rear'.

Details of Condition 5 - details of the arrangements for the storing of domestic refuse attached to planning permission 21/AP/0941 [dated 18.02.2022] for 'Construction of a part three and part two storey extension to the rear, comprised of a three storey rear extension to the main building and two storey side extension to the outrigger, to facilitate the conversion of the existing residential dwelling into three selfcontained flats (2 x 2B3P & 1 x 1B2P), with associated access, refuse and cycle storage arrangements complete with alterations to the fenestration at the rear'.