Variation of a condition 1-Approved plans for full planning application 21/AP/3422 dated 16/11/2021 for loft conversion with gable end and rear dormer roof extension and 2no rooflights to front elevation Amend the dimensions of the exterior windows and introduce some new ones to optimise interior light and layout. External dimensions will not change. Condition Number(s): 1 Conditions(s) Removal: Amend the dimensions of the exterior windows and introduce some new ones to optimise interior light and layout. External dimensions will not change Change the drawings to the new ones. Currently there is a single layout sheet including all the drawings. Add to approved plans the revised elevations and roof plan

Variation of Conditions 1 'Approved Plans' of planning permission ref. no. 22/AP/1797: Minor Material Amendment for full planning permission 20/AP/1119 dated 11/06/2020 for Conversion of the existing first and second upper floors to 2 x 3 bedroom residential self-contained flats with associated refuse storage and the erection of a rooftop extension to form additional 1 x 1 bedroom flat: - Square off the diagonal corner to the front elevation; - Extend the proposed structure to the rear by 0.48m; - Increase the internal floor to ceiling height by way of raising the structure's height; - Internal reconfiguration to provide x1 additional bedroom - Re-organisation of front and side elevation to correspond with internal reconfiguration. Proposed s73 amendments include to: - Increase the height of the approved roof extension by 0.3m - Extend the footprint of 1m (width) x 4.5m (depth) to the northern elevation of the roof extension to utilise the existing staircase and internal reconfiguration; - Relocate the roof extension southwards by 0.3m with increases in depth and width from 13.8m to 14.5m and 5m to 5.8m respectively - Reorganise fenestrations to correspond with internal reconfiguration - Amend external material finishes from the aluminium framed glazing system and fibreglass resin roof to squared edge larch timber cladding, membrane roof and pine timber window frame

Minor material amendment to the planning permission with ref. no. 21/AP/4585: Construction of a side infill extension in front of the existing garage; conversion of garage into a habitable space; the installation of new rooflights and alterations to the existing fenestration. The proposed changes are as follows: - Revised rooflight facing the front elevation of the garage; - Revised design details above the new garage doors on the front elevation; and - Revised roof form of the single storey rear extension to feature a pitched roof.

Variation of condition 1 (Approved Plans) pursuant to planning permission 21/AP/4724 for Construction of a part single, part two storey extension and lower ground and ground floor levels, and the enlargement of the existing front lightwell. Conversion of two flats into one dwellinghouse. The amendment includes the following: small amendments to the scheme including raising the floor heights and parapet heights. The parapet height is to match the neighbours extension raising it circa 150mm from the approved drawings. Condition Number(s): 1. The development shall be carried out in accordance with the following approved plans: 2129_010 P5 PROPOSED FLOOR PLANS; 2129_011 P5 PROPOSED ELEVATION AND SECTION PLAN; 2129_020 P2 FIRE STRATEGY 2. The development hereby permitted shall be begun before the end of three years from the date of this permission. 3. The materials to be used in the implementation of this permission shall not be otherwise than as described and specified in the application and on the drawings hereby approved unless the prior written consent of the local planning authority has been obtained for any proposed change or variation. 4. All windows on the side elevation of the ground floor extension, facing number 128 Grosvenor Terrace, shall be obscure glazed and fixed shut and shall not be replaced or repaired otherwise than with obscure glazing. The side wall of the ground floor extension facing 124 Grosvenor Terrace shall be of solid construction. Conditions(s) Removal: The client would like to make small amendments to the scheme, including raising the floor heights and parapet heights slightly for drainage reasons. The parapet height is to match the neighbours extension, which raises it circa 150mm from the approved drawings. Update condition 1( approved plans condition ) to include updated drawings

Minor material amendment to planning permission 16/AP/3075 [Approval date: 29.03.2019] 'Redevelopment comprising the removal of the Peckham Arch and redevelopment and part conversion of the southern part of the square (including 91-93 Peckham High Street) to provide a mixed use scheme comprised of two buildings of 4 and 6 storeys to provide 19 residential (Class C3) units, 255 sqm of gallery (Class D1) space, 201 sqm of co-work (Class B1) space, and 82 sqm of office (Class B1)/retail(Class A1) space with ancillary covered cycle storage and enclosed refuse storage' consisting of: - Changes to the design of Site/Block 1, including: - Reduction in the floor area of the consented gallery and associated facilities; - Reconfiguration of the residential core at ground floor level to incorporate a refuse store off Peckham High Street; - Addition of rooftop plant; - Alterations to the south, west and north elevations (fenestration, materials, parapet levels, rainwater goods etc.); - Transfer of sedum roof from roof of Level 02 to roof of Level 03; - Changes to the design of Site/Block 2, including: - Reduction in floor area of the co-working space; - Enlargement of building footprint; - Increase to the building's height; - Creation of separate bin store for co-working space; - Addition of rooftop plant; - Alterations to the west and north elevations (fenestration, materials, parapet levels, rainwater goods etc.); - Changes to landscaping and refuse strategy.

Minor material amendment to planning permission 16/AP/4018 [Approval date: 15.11.2019] 'Redevelopment of the site to provide four buildings to deliver 168 residential dwellings (Class C3) and flexible retail floor space (247m2) of flexible A1/A3/A4; The works include the conversion and extension of Sumner House (Block A) from office use (Class B1-c to provide 44 no flats and 4 no townhouses and partial demolition of boundary wall; the erection of a part 4, part 6 storey block to provide 39 no flats on Sumner Avenue (Block B); part 4(Block B); a part four, part 6 storey building to provide 72 no flats on Jocelyn Street (Block C); and a four storey block providing 9 flats on Melon Road (Block D), with 247m2 of flexible A1/A3/A4 use at ground floor level together with car parking, hard and soft landscaping, and other associated works incidental to the development' consisting of: - One change to the design of Flaxyard Block B: - Switching the balcony/terrace balustrades from glass to solid panels; - Changes to the design of Flaxyard Block C, including: - Enlargement of building footprint on floors 04 to 05; - Small number of fenestration changes; - Reduction in size of the external cycle store, but with a separate supplementary store to now be provided; - Changes to the design of Flaxyard Block D, including: - Enlargement of building footprint on floors 01 to 03; - Reduction of floorspace of the commercial unit from 247m2 to 224.5m2; - External door changes; - Changes to landscaping and car parking arrangements.