Variation of Condition 1 'Approved Plans' of planning permission 20/AP/3131: Demolition of the existing ground floor single storey rear extension and the construction of a new single storey side/rear extension to the ground floor flat with the installation of a boundary wall with a maximum height of 1m to the front of the property. Variation sought: 1. Change in the roof height and angle. 2. New roof light configuration. 3. Reinstatement of the existing window and entrance door. 4. Change from render to brick on the party wall to match the neighbouring building.

Resubmission of detail of Condition 5 Part (i) (Disabled Access -to provide redefined design to the access lane) pursuant to planning permission ref: 21/AP/0200 granted for: 'Variation of Condition 1 (Approved Plans), 6 (Cycle storage), 8 (Materials) and 10 (Basement Impact Assessment) of the planning permission 18/AP/2912 dated 20/02/2019 (which was a 'Variation to Condition 1 (approved plans), to planning permission 15/AP/0912, dated 27.05.2016 (which was a variation to condition 1 (approved plans ) of the planning permission 13/AP/1662 dated 13.12.2013 for 'Redevelopment of site to the rear of 55-67 Upland Road involving the demolition of existing light industrial workshops (B1) and the erection of a 2 bed single storey dwellinghouse and detached habitable room (3rd bed), with access along the side of 67 Upland Road.') to allow the following alterations: - Revised basement and ground layout and roof geometry - Removal of Condition 6 (Cycle Storage) - The external materials similar to approved with green sedum roof, metal glazed facade with the addition of timber pergolas and - Screens, and painted masonry external walls around the boundary. - Revised Basement Impact Assessment'

Variation of Condition 1 (Approved Plans) of planning permission ref. no. 21/AP/0200 for: (Variation of Condition 1 (Approved Plans), 6 (Cycle storage), 8 (Materials) and 10 (Basement Impact Assessment) of the planning permission 18/AP/2912 dated 20th February 2019 (which was a 'Variation to Condition 1 (approved plans), to planning permission 15/AP/0912, dated 27.05.2016 for 'Redevelopment of site to the rear of 55-67 Upland Road involving the demolition of existing light industrial workshops (B1) and the erection of a 2 bed single storey dwellinghouse and detached habitable room (3rd bed), with access along the side of 67 Upland Road.') to allow the following alterations: - revised basement and ground layout and roof geometry - removal of Condition 6 (Cycle Storage) - the external materials similar to approved with green sedum roof, metal glazed facade with the addition of timber pergolas and - screens, and painted masonry external walls around the boundary. - revised Basement Impact Assessment) to allow the following changes: -Refinement of the design of the previously approved rooflights, reducing them in size, omission of a rooflight over staircase and addition of a small rooflight over the utility room.

Variation of Condition 1 (Approved Plans) pursuant to planning permission 21/AP/2528 for Demolition of existing rear two storey outrigger and construction of ground floor side and rear extensions and lower ground floor rear extension The amendment seeks the following: reduction of scope to the rear ground and first floor extension. The total area reduction in terms of GIA footprint at ground floor level is 13sqm and 3.9sqm at first floor respectively. The depth of the extension has been considerably reduced to 3.6m. - Boundary fence/wall with 321 Lordship Lane : The boundary wall/fence due to being in poor condition and at risk of collapsing is to be rebuilt. - As a result of the reduction in extension depth the flank wall of the proposed extension is to now be built astride to this boundary wall, as shown on the amended architectural plans. - First floor, rear elevation : Reduction in depth of the first floor massing, commensurate with the reduction at ground floor. Omission of the window to the splayed corner. - Side extension : Introduction of a rooflight within the flat roof of the side extension in lieu of the exposed timber rafters indicated on the approved scheme.

Details of Condition 5 (Disabled Access), as required by planning permission 21/AP/0200 dated 12/05/2021 for - 'Variation of Condition 1 (Approved Plans), 6 (Cycle storage), 8 (Materials) and 10 (Basement Impact Assessment) of the planning permission 18/AP/2912 dated 20th February 2019 (which was a 'Variation to Condition 1 (approved plans), to planning permission 15/AP/0912, dated 27.05.2016 (which was a variation to condition 1 (approved plans ) of the planning permission 13/AP/1662 dated 13.12.2013 for 'Redevelopment of site to the rear of 55-67 Upland Road involving the demolition of existing light industrial workshops (B1) and the erection of a 2 bed single storey dwellinghouse and detached habitable room (3rd bed), with access along the side of 67 Upland Road.') to allow the following alterations: - revised basement and ground layout and roof geometry - removal of Condition 6 (Cycle Storage) - the external materials similar to approved with green sedum roof, metal glazed facade with the addition of timber pergolas and - screens, and painted masonry external walls around the boundary. - revised Basement Impact Assessment'.

Details of Condtion 3 External boundary treatment and finishing materials as required by planning permission 19AP1788 dated 7/2/2020 for Variation of Condition 1 - Approved Plans - as required by planning permission 14/AP/3104 (Redevelopment of the site to include the demolition of all existing buildings (Use Class B2) and the excavation and removal of fuel tanks and associated supply lines and the construction of 12 dwellings (Use Class C3), 1 x 2 bed and 2 x 1 bed affordable dwellings, 1 x 3 bed house (affordable, wheelchair accessible dwelling), 4 x 4 bed houses and 4 x 5 bed houses with ancillary living accommodation and car parking at basement level accessed from Gilkes Place and landscaping.) Window section Drawing & Word Document containing itemised list of proposed finishes and materials

Details of Condition 3 - details of a Sustainable Urban Drainage System (SUDS) required by planning permission dated 12/05/2021 [LBS Ref 21/AP/0200] for 'Variation of Condition 1 (Approved Plans), 6 (Cycle storage), 8 (Materials) and 10 (Basement Impact Assessment) of the planning permission 18/AP/2912 dated 20th February 2019 (which was a 'Variation to Condition 1 (approved plans), to planning permission 15/AP/0912, dated 27.05.2016 (which was a variation to condition 1 (approved plans ) of the planning permission 13/AP/1662 dated 13.12.2013 for 'Redevelopment of site to the rear of 55-67 Upland Road involving the demolition of existing light industrial workshops (B1) and the erection of a 2 bed single storey dwellinghouse and detached habitable room (3rd bed), with access along the side of 67 Upland Road.') to allow the following alterations: - revised basement and ground layout and roof geometry - removal of Condition 6 (Cycle Storage) - the external materials similar to approved with green sedum roof, metal glazed facade with the addition of timber pergolas and - screens, and painted masonry external walls around the boundary. - revised Basement Impact Assessment'.

Details of Condition 4 (details of the means of enclosure for all site boundaries) as required by planning permission 21/AP/0200 dated 12/05/2021 for - 'Variation of Condition 1 (Approved Plans), 6 (Cycle storage), 8 (Materials) and 10 (Basement Impact Assessment) of the planning permission 18/AP/2912 dated 20th February 2019 (which was a 'Variation to Condition 1 (approved plans), to planning permission 15/AP/0912, dated 27.05.2016 (which was a variation to condition 1 (approved plans ) of the planning permission 13/AP/1662 dated 13.12.2013 for 'Redevelopment of site to the rear of 55-67 Upland Road involving the demolition of existing light industrial workshops (B1) and the erection of a 2 bed single storey dwellinghouse and detached habitable room (3rd bed), with access along the side of 67 Upland Road.') to allow the following alterations: - revised basement and ground layout and roof geometry - removal of Condition 6 (Cycle Storage) - the external materials similar to approved with green sedum roof, metal glazed facade with the addition of timber pergolas and - screens, and painted masonry external walls around the boundary. - revised Basement Impact Assessment'.

Details of Condition 6 - scale 1:5, 1:10 or 1:20 section detailed-drawings of the elements required by planning permission dated 29/11/2018 [LBS Ref 18/AP/2840] 'Variation of condition 1 (approved plans) of planning permission 15/AP/4337 (Creation of a new public square between Peckham Rye Station and Rye Lane following demolition of the arcade buildings currently located between the north and south railway viaducts; refurbishment of the railway arches facing onto the new square and refurbishment and erection of a two storey extension to the building at 2-10 Blenheim Grove / 82 Rye Lane, to provide A1 (retail), A2 (financial and professional), A3 (restaurant / cafe), A5 (hot food takeaway), B1a (offices) and D1 (non-residential institution) uses, together with hard landscaping, public WC and other associated works.) comprising Increase in the overall height of extension by 500mm; Reduction in plan size of Blenheim Grove extension; Provision of boundary fence along railway parapet wall; Alterations to elevations including location of windows, louvres and inclusion of fixed access ladder and boundary fencing; Modifications to internal layouts',

Variation of Condition 1 (Approved Plans), 6 (Cycle storage), 8 (Materials) and 10 (Basement Impact Assessment) of the planning permission 18/AP/2912 dated 20th February 2019 (which was a 'Variation to Condition 1 (approved plans), to planning permission 15/AP/0912, dated 27.05.2016 (which was a variation to condition 1 (approved plans ) of the planning permission 13/AP/1662 dated 13.12.2013 for 'Redevelopment of site to the rear of 55-67 Upland Road involving the demolition of existing light industrial workshops (B1) and the erection of a 2 bed single storey dwellinghouse and detached habitable room (3rd bed), with access along the side of 67 Upland Road.') to allow the following alterations: - revised basement and ground layout and roof geometry - removal of Condition 6 (Cycle Storage) - the external materials similar to approved with green sedum roof, metal glazed facade with the addition of timber pergolas and - screens, and painted masonry external walls around the boundary. - revised Basement Impact Assessment