Variation of Condition 1 (Approved drawings) for full planning permission 21/AP/2183 dated 27/08/2021 for 'Extensions and alterations to the existing building to facilitate the reconfiguration of two existing self-contained flats to form 2 x 2 bedroom flats alongside a loft conversion and roof extension' to allow: i) The former shop frontage at ground floor which was previously proposed to be repaired and redecorated is now being replaced with a more suitable entrance to both dwellings. ii) Ground floor rear fenestration has been simplified. iii) Layout of flat 2 kitchen updated and area schedule updated. iv) Rear access path removed in favour of better internal environment to flat 1. v) Materials key updated to reflect changes proposed elsewhere.

Variation of Condition 1 (Approved Plans) pursuant to planning permission 21/AP/1122 for 'Demolition of the existing buildings and construction of a new part four, part three and part two storey building facing Alice Street, a three storey terrace with mansard level and re-use of existing basement facing onto Tower Bridge Road, to provide 9no. residential dwellings (Use Class C3) and a retail unit (Use Class E(a)).' The amendment includes the following: - propose infill between house 2 and 3 set back from courtyard elevation to provide walk-in closet; - relocate ASHP in house 1 onto the flat roof in concealed location besides the consented brickwall; - position consented south-facing 2/F window 835mm to the right for house 1; - reduce perimeter wall adjacent to Capacity House and Nos. 87 & 89 TBR to nominal 2-3m from proposed site datum level

Details of condition 19 (biodiversity (green/brown) roof(s) identified on approved plans) required by planning permission 19/AP/7564 'Minor-material changes to planning permission 17/AP/3910 [Approved: 19.12.2018] for: "Demolition of the existing building and construction of a part 13 storey/part 9 storey block fronting onto New Kent Road and a part 6 storey/part 4-storey block fronting onto Munton Road, to provide a mixed-use development, with basement, providing 81 residential units, 1361sqm of flexible business floor space/non-residential institution (Use Class B1/D1) and 448sqm of retail floor space (Use Class A1) with associated cycle parking, servicing, refuse and recycling, landscaping and private and communal residential amenity space" Changes comprise: - Changes to detailed architecture and external appearance, including to the size and configuration of windows, balconies/terraces and to the roofline - Increase in overall height from 46.8m AOD to 49.0m AOD (i.e. +2.2m) - Changes to the internal layout to some residential units, resulting in changes to the approved dwelling mix, habitable rooms and bedspaces but no change to the total number of dwellings - Increase in the number of Affordable Housing units from 22 to 39 units (52% affordable housing by habitable room) - Reconfiguration of commercial space at basement and ground floor levels, including an extended basement area - Landscaping changes to the first floor residents' terrace, including the relocation of rooflights to serve the commercial space below - Changes to design of forecourt area fronting New Kent Road, including the relocation of two disabled parking bays

Details of Condition 5 -Domestic refuse Storage as required by planning permission 20/AP/1750 dated 24/08/2020 for Construction of an extension to the rear outrigger at first and second floor level, dormer window to the rear roof plane and addition of three roof lights to the principal roof plane, to facilitate the subdivision of the existing three bedroom dwelling into two self contained flats (1 X 1B2P and 1 X 2B4P), complete with alteration to the existing shop front to include the residential entrance.

Details of Condition 3- Facing Materials as required by planning permission 20/AP/1750 dated 24/08/2020 for Construction of an extension to the rear outrigger at first and second floor level, dormer window to the rear roof plane and addition of three rooflights to the principal roof plane, to faciliate the subdivision of the existing three bedroom dwelling into two self contained flats (1 X 1B2P and 1 X 2B4P), complete with alteration to the existing shop front to include the residential entrance.

Construction of an extension to the rear outrigger at first and second floor level, dormer window to the rear roof plane and addition of three rooflights to the principal roof plane, to faciliate the subdivision of the existing three bedroom dwelling into two self contained flats (1 X 1B2P and 1 X 2B4P), complete with alteration to the existing shop front to include the residential entrance.