Tree 1: Evergreen Cypress/Chamaecyparis Glauca. This is approx 25 metres high and we would like to lop it to match the height of the surrounding trees at approx 6m. Tree 2: Evergreen Cupressocyparis Leylandii. This is approx 20 metres high and similarly we would like to lop it to match the height of 6m of surrounding trees. Both trees are in the rear garden of no 10 Chertsey Road and situated 4 metres apart from each other and block a lot of light for both ourselves, no 10 Chertsey Road and our adjoining neighbours no 14 Chertsey Road. They are positioned halfway down the garden away from buildings of no.10 and no.14. They are near to a mature 15m deciduous Walnut tree and a 15m deciduos Pear Tree. They are a nice addition to the garden and boundary but are becoming too high for light to reach the gardenand borders throughout the year.

T1- Sycamore, H 10m, S 8m. Uneven canopy due to historically pruned away from street light. Recommend a 20% crown reduction of the whole canopy to rebalance canopy, cutting branches by up to 2m from tips. Reduction on 10m height and 8m spread will result in 8m height and 6.5m spread post works. T3- Whitebeam- Crown lift to 3m above ground level to give clearance to large vehicles. T4- Cherry, Crown lift to 3m above ground level to give clearance for pedestrians. T5- Cherry, H11m S6m. Crown reduction of whole canopy cutting branches back by up to 3m from tips to previous cut points to clear the tree away from the neighboring tree. Reducing height to 6m and spread to 4m. T6- Walnut, H10m S8m- Branches touching building blocking street light. Recommend crown reduction of the whole canopy, cutting branches by up to 2.5m from tips. Reducing height to 6m and spread to 6m. T11- Whitebeam- Crown lift to 3m from ground level to make clearance for the path and parked cars. T13-Oak H9m S9m, Tree growing from railway and over boundary fence. Branches touching the building. Recommend a crown reduction away from the building, cutting branches by up to 1.5m from tips, reducing the spread of the tree to 7m. T14 Oak, Lower branches touching the building and over hanging road. Crown lift to 5m from ground level to clear away from garages and large vehicles.

Proposed removal of 2 trees close to our rear patio doors - 1 x Yew and 1 x Holly. The size of the trees have got a little out of control, with large amounts of debris / fallen leaves now falling on our living area. The trees grow inbetween 2 original large mature Scots Pine trees, which will not be touched. In addition to this, we have a large mature oak tree in a corner boundary, that while growing towards the light, is also growing predominantly over our garage/extension roof. We would like to ask for permission for a tree surgeon to take some of the weight out of the extremities of this tree, in addition to some heavy branches that are growing over our neighbour's boundary into No 9 Ferniehurst. Please find pictures and plan attached.

We are planning on carrying out some maintenance tree works to the MOD boundary trees adjacent to St Michaels church yard. we will be crown lifting over the road to 4m and 2m over the graves and grassy areas. we are also going to be dead wooding some trees over the roads, and removing of 2 dead trees and 1 hung up tree, and the removal of 2 top snap out trees. all locations and specs can be found within the attached document.

T1- Remove alder to ground level. There is a historical wound and rot evident at its base, the tree is also leaning away from the wound so there are fears it could fail. T2- Remove 2 conifers to ground level, to allow more light into the property. T3- Lift conifer by 5m to allow more light into the property again. The current height 15m tall 4.5m wide, no change for this work. T4- Remove limb off laurel which is resting on the fence to avoid further damage to the property. T5- Reduce hazel by 50%, this will reduce overly weighted branches and remove hazardous deadwood. The current height is 7.5m tall 4.5m wide and will be 4.5m high and 3m wide following the proposed work. T6- Reduce oak by 2.5m and remove lowest limb, this is to keep size maintainable in the future as it leans heavily over a public children's play area, and the client is aware of liability where safety concerns lie. Current height is 18.5m and 14m wide, and will be 16m high and 12m wide following the proposed work. T7- Cut back/pollard 3 alders back to the property boundary, this is to reduce weight as they lean very heavily toward the property. The current height is 7.5m tall and 2m wide, then will become 3m high and 0.5m wide following the proposed work. T8- Reduce Laburnum by 50% from 4.5m tall and 2m wide, to 2.5m tall and 1m wide to keep the size small and manageable for the client.

We propose to complete vegetation clearance of Rhododendron shrub on the Western boundary of the nearby cottage. We would like to clear a 3 metre strip of Rhododendron. There will be no work to any surrounding trees within the woodland specified within the TPO area. Woodchip will be laid into various seperate piles rather than spread evenly as per instruction from Arboricultural Officer previously.

T1 in the attached report. I am applying to fell the tree to ground level on my property per the recommendations of the report. The tree location is at the rear of my garden adjacent to the boundary with the public playground in the park opposite.

T1- re pollard large weeping willow tree, the tree was last pollard 10 years ago and is now starting to encroach on neighbouring properties T2- cut back silver birch tree to the boundary. the tree is over hanging number 42 from neighbouring property G1- cut back assortment of small willow trees away from the property

When looking at the property from the road, Oak 1 is a large American Oak tree which is situated to the right boundary of the property, branches extend over to our neighbour (number 4 Carlinwark Drive). This tree has a number of dead branches as shown in the Sept 22 photos, I'd like these to be removed as we do get a number of branches falling on the cars on the driveway. I would then like a crown reduction back to the original growth points e.g. where it had been reduced before which would be up to 2 metres. Some of the tree branches have now grown over the property. When looking at the property from the road, Beech 1 is a large Beech tree which is situated on the front boundary of our property, right in the middle and therefore branches extend over the road. This tree hasn't has any work completed on it for a very long time and would therefore like a crown reduction of up to 2 metres (more of it would be allowed), again removing any dead branches which there are a couple.

T1 - Qurcus robur located on the boundary between cherry tree cottage and 35 atfield grove. Proposed works are to reduce canopy all round by approximately 2-3 meters back to historical pollard points and pruning to growth where possible. Reason for the proposed works is due to concern from 35 atfield grove over the stability and integrity of the tree although there was nothing of any obvious concern that I could see when I viewed the tree.