Minor material amendment to planning permission 20/P/0861/FUL (Erection of 14no. dwellings, provision of access, public open space, drainage, landscaping and ancillary works) to allow for construction of retaining walls to the rear of plots 1-7; creation of maintenance buffer around the whole site; a gabion basket wall incorporated onto the southern boundary; reduce the overall ridge heights and slab levels of plots 1-6; with the exception of plots 1, 8 and 14 the replacement of walling to front of dwellings with estate railings and hedgerows; alterations to materials used on elevations; addition of dormer to front of house type C, changes to canopies, alterations to internal layouts and other minor external amendments to housetypes; alterations to design of car ports; width of footpath along northern side of the road increased by 0.5m and the 0.5m service strip along southern edge of road to be removed.

Details of Condition 5 'Noise Impact Assessment' pursuant to planning permission 22/AP/3014 dated 08/12/2022, which was an amendment to planning permission 22/AP/0103 dated 28/04/2022 for the 'Construction of a single storey side-rear extension with a pergola to the rear and an 'L-shaped' rear dormer extension, in conjunction with the raising of the roof ridge by 420mm and the installation of two rooflights on the front roof slope; the installation of an enclosed air source heat pump and photovoltaic panels on the roof of the dormer; the restoration of the original brickwork to the front of the property and the installation of horizontal tiled cladding to the rear; the installation of new aluminium framed windows throughout, including two Juliet balconies to the rear; and the removal of the existing front boundary wall and the addition of a timber bin store and metal planters to the front garden'.

Minor material amendment to planning permission ref. 22/AP/0673 (Conversion of two flats to one single family dwellinghouse; construction of a ground floor side infill and rear extension; a first floor side extension; an L-shaped rear dormer roof extension with a roof terrace at second floor level; and the installation of 1x rooflight to the front roofslope) to amend the design of the ground floor rear extension to consist of a pitched roof and to raise the party wall. The changes include: - To change the design of the ground floor rear extensions roof from a flat roof to a pitched roof design; and - to increase the eaves height on the boundary with No 37 from 2.5m to 3m and to increase the maximum height of the extension.

Variation of condition 14 (approved plans) relating to Planning Permission Reference 19/02720/FUL (Construction of a detached dormer bungalow and triple garage and access to the highway) to amend garage, add oak frame to sun lounge and alterations to boundary wall

Variation of condition 1 (approved plans) pursuant to planning permission 18/AP/3869 dated 11th April 2019 for 'Variation of Condition 2 'Approved Plans' pursuant to planning permission 17/AP/4450 for: (Conversion of existing 4 bed house into 2 x 2 bed houses; Demolition of existing single storey rear projections and construction of two storey rear extension incorporating an enclosed balcony area for both houses; Construction of rear dormer for both houses with one roof light to each front roof slope; Partial removal of front boundary wall; Provision of hard landscaping to front; Provision of two cycle spaces for each house.) to allow for (i) a full width two storey rear extension to both houses incorporating full width enclosed balconies above (ii) two additional roof lights to the flat roof of the proposed rear dormers (iii) retention of the first floor front middle window'. The amendment consists of the following: -Increase the gross internal area of the basement per dwelling by 24.5m2 -The previously approved dormer flat roofs to be replaced with sloping pitched roofs of 8-10 degrees.

Minor material amendment to 20/AP/0187 (Construction of ground floor side-rear extension and rear dormer to second floor) for proposed ground floor side-rear extension to be setback by 600-700mm from boundary and increase eaves height from 2.20m to 2.80m and increase in maximum height from 3.50m to 3.70m