Tree number - G1 Tree type - x2 Hazel (Corylus avellana) Approx Height - 5m Location - Front garden Right hand boundary Service - Prune Work required- reduce height down to approximately 3m, cut back to provide approximately 1m clearance from clients house Reason - as part of continued maintenance Tree number - T1 Tree type - Laurel (prunus laurocerasus) Approx Height - 1.5m Location - Rear garden left hand boundary near house Service - Prune Work required- remove dead section (see photos) Reason - section is near to dead Tree number - G2 Tree type - Laurel (prunus laurocerasus) Approx Height - 4m Location - Rear garden Rear boundary Service - Prune Work required- reduce height down to approximately 2.5m (gutter height of adjacent shed/garage Reason - as per clients wishes Tree number - T2 Tree type - Plum (prunus spp) Approx Height - 6m Location - neighbours tree, overhangs clients Rear garden Right hand boundary and clients Apple tree Service - Prune Work required- cut back to boundary the overhang to clients garden Reason - to reduce encroachment

Details of Condition 4. Tree protection as required by planning permission 22/AP/2987 dated 25/11/2022 for construction of a single storey rear extension with integrated canopy. Demolition of the existing shed and construction of a new shed building and bike store to the side. Facade alterations to replace the existing windows and cladding. Renovation of the existing porch/garage to include a new roof, cladding and glazing. Installation of two rooflights to the rear roof slope. Boundary alterations to continue the existing hit and miss brick wall. Excavation works to create a lower patio level linking the new shed building to the main house and minor landscaping works to reform the front and rear gardens.

Remove existing car port, erect single storey integral garage to side, convert existing integral garages to guest bedroom and gym, alterations to existing roof of workshop/storage shed to raise roof height and include flat roof to rear to include various internal and external alterations to include new tree planting following the removal of existing trees (Amended Plans Received 19/06/2023 showing replacement trees adjacent to the north east side boundary).

Erection of 1no dwellinghouse with attached garage to include air source heat pump and photovoltaic panels together with associated landscaping, boundary treatment, car parking and widening of existing entrance. Erection of detached summer house and shed. Removal and minor works to trees

G2 Cypress, holly, hawthorn trees (excluding horse chestnut) - Cut back to boundary line between properties in the form of a hedge, reduce back from garage/shed to give approximately 1m clearance. Fronting property (eastern boundary) 1. Willow tree, remove tree 2. 10 leylandii, reduce to approx. hight of 3m from ground level, crown lift by approximately 2m 3. Holly hedge maintain at approx. 2m Rear boundary (western boundary) 1. Cypress growing into neighbours property - remove tree 2. Cherry, crown thin to a max. 30%, crown clean 3. Cypress 3 trees- etiolated - remove trees 4. Cypress 3 trees - reduce by 3m Southern boundary Yew - reduce by 30% Laurel, holly elder hedge maintain at approx. 2m (see notification documents saved under 23/00750/TPO)

Extension 1. The application is for a renewal of an identical application that was approved in 2016. 2. The site currently accommodates a small house and two sheds. It is bounded by residential property on two sides, a paddock to the rear and is on the residential fringe of Westleton. The prevailing scale in the neighbourhood is varied with traditional one and two storey dwellings with one much larger property next door. 3. The existing house is to be extended to provide a single storey garage and an additional bedroom and ground floor bathroom to make the accommodation more modern and flexible. 4. The proposed dwelling will have no openings onto neighbouring properties and is screened by hedges and fences with the principal trees and boundary hedging and fencing being retained. 5. Highway access, bin and oil storage will be unchanged. 6. The exception is to increase the height of the existing perimeter willow fence to up to 3 meters (to graduate up after a minimum of 4 meters from the roadway) along the boundary between the cottage and the new building next door to improve privacy for both buildings following the new build increasing the land elevation in their back garden and increased scale of overlooking windows. 7. External materials are limited to brick and tiling compatible with local styles. 8. No biodiversity issues are presented by the proposals. 9. The site has been checked for contamination in 2017 and 2019 with no issues being found. 10. The site is not within a Conservation Area and the building is not listed.

Construction of a stand-alone shed for the purpose of timber drying and storage of timber, kayaks and garden equipment. The shed is rectangular in plan, 8.0 m by 3.0 m, with a pitched roof, overall height 2.97 m. In the interests of sustainability and economy, it will reuse the roof tiles and A-frames from an old garage elsewhere on the site, due for demolition. The roof is supported on timber columns. The timber columns and timber edging to the roof are painted black. The proposal includes continuing an 800 mm high earth bank along the boundary with the road, topped with a hedge.

MAIN APPLICATION TREE WORKS 1 1, T1 & T2 - Copper Beech trees - in front garden next to the road. Aim - to lift the crown - clean and clear dead wood with a reduction of 10% 2, T3 - Norway Maple - drive way. Aim - to lift the crown, reshape/balance (currently lopsided) crown clean with a reduction of 10% 3, G1 - rear garden area 2 poor quality Fir trees next to the garage, west side of garden Aim - remove. 1 poor quality Fir tree beneath the Holm Oak, west side of garden Aim - remove Unidentified Evergreen tree - between Holm Oak and Silver Birch - west side rear garden. Aim - Crown reduction to reduce the overall size and shape thus allowing more light to the Silver Birch Tree. A reduction of 5ft. Silver Birch Tree - rear garden Aim - Crown clean to remove dead and dying wood to prolong life of the tree. Eucalyptus Tree - east side of garden Aim - Crown reduction by 10-15% its height and proximity to our eastern boundary. It's height has become a concern to our elderly neighbour at no 76a. Elder tree - east side of garden adjacent to neighbour no 78 fence and shed. Aim - remove as dead. We intend to plant new trees once the works have been completed. Currently we have 2 new apple trees and a Persian Ironwood tree to be added to the garden in G1. We are liaising with our arborealist about sourcing suitable trees.

T1. Fell and grind out stump of first conifer within hedge row due to poor form T2. Cut back to boundary line one silver birch over garage/shed - this will involve a maximum laterall reduction of 0.5m to maintain historic trim line