Details of Condition 4. Tree protection as required by planning permission 22/AP/2987 dated 25/11/2022 for construction of a single storey rear extension with integrated canopy. Demolition of the existing shed and construction of a new shed building and bike store to the side. Facade alterations to replace the existing windows and cladding. Renovation of the existing porch/garage to include a new roof, cladding and glazing. Installation of two rooflights to the rear roof slope. Boundary alterations to continue the existing hit and miss brick wall. Excavation works to create a lower patio level linking the new shed building to the main house and minor landscaping works to reform the front and rear gardens.

Demolition of existing rear extensions and shed, construction of new extensions and refurbishment of the dwellinghouse. Construction of detached garage with ancillary accommodation and removal of trees and sections of hedgerows.

The removal of the garage under the large Beech tree and the construction of a garden shed/office, replacement gate and removal of small section of wall at vehicular access.

The removal of the garage under the large Beech tree and the construction of a garden shed/office, replacement gate and removal of small section of wall at vehicular access.

Details of Condition 7 'Proposed Tree Planting' pursuant to planning permission ref. no. 22/AP/2129: Demolition of existing front porch area, rear outbuilding, construction of ground floor single storey extension, bin storage and bike shed to the front elevation and two storey sloped extension to rear elevation, re-construction of rear retaining wall, re-design and construction of fenestration, re-design and pavement of driveway and re-configuration of internal layout

Construction of side extension incorporating a car parking space; single storey side/rear extension with raised platform (following demolition of existing side and rear extension); installation of three solar panels to rear roofslope; ; alteration of roof from hip to gable end; rear roof extension incorporating Juliet balcony, and installation of two roof lights to front roof slope; demolition of garden outbuilding and shed at the rear; and removal of trees at rear

Construction of a garden room and relocation of the existing tool shed in the rear garden. Removal of two ash trees due to ill health, replaced with two Hornbeam trees (carpinus betulus).

Construction of a stand-alone shed for the purpose of timber drying and storage of timber, kayaks and garden equipment. The shed is rectangular in plan, 8.0 m by 3.0 m, with a pitched roof, overall height 2.97 m. In the interests of sustainability and economy, it will reuse the roof tiles and A-frames from an old garage elsewhere on the site, due for demolition. The roof is supported on timber columns. The timber columns and timber edging to the roof are painted black. The proposal includes continuing an 800 mm high earth bank along the boundary with the road, topped with a hedge.

Lower ground single storey extension and associated refurbishment and alterations including new crossover for driveway. 'Variation of Conditions 1, 3c, 3d, 3e, 3f, 3g, 4, 5 and 6 of permission 18/00251/HHOLD 1. Change - Change in construction and waterproofing method necessitated slight change in layout. Rooflight changes create lower visual impact, including house no longer obscured by rooflights from east elevation, and allow easier access around the site through the use of walk on glass. Introduction of structural planters to provide screening and privacy to the patio from the road, while integrating a hidden railing and softening the overall visual impact of the extension. 3c. Removal - Landscape design submitted showing replacement planting following excavation leading to loss of trees and shrubs. Replacement planting and design proposed, 3d. Removed - Railings have been safely removed and preserved, and will be placed in new location around the drive, as per plans. 3e. Change - Stairwell walls to be matching white render at and below the level of the white plinth of the existing house that surrounds the ground floor. Matching brickwork above the level of the existing plinth. All external walls facing the drive (and all other external walls) will be matching brick. Physical brick sample can be provided on request - Proposed brick - "All About Bricks - Straw blend" (As used (same batch) by Dunottar School in its recent development). 3f. Removed - Hard landscaping details included as part of landscape design submitted here. 3g. Removed - Landscape design shows position and size of proposed shed. Pent shed with single door and windows facing north. 4. Removed - As per 3c, Landscape design submitted showing replacement planting following excavation leading to loss of trees and shrubs. 5. Removed - Landscape design submitted.' As amended on 07/10/2021, 11/11/2021 and 06/12/2021.

In the rear grounds:1/erect a new wooden 9x1.5m (lxh) fence and a 2x1m (lxh) extension to an existing picket fence close off an area to assist with child safeguarding.2/ to provide more outdoor storage for church equipment. Add two sheds, 3x3x1.75m and 2.75x2x1.75m (wxdxh). DC/15/3361/FUL and DC/16/1077/AME previously granted permission for outdoor storage and an artificial turf area with associated fencing and hedging in the rear grounds. Note the area stated of 270 square meters in the application is the area of the affected portion of the rear grounds. Permission is required because the grounds lie within a conservation area and form part of a curtilage of a grade 2 listed building (listing is subject to ecclesiastical exemption and is the remit of the trustees). The long fence will provide a physical barrier to people from the street casually entering the rear grounds when we have children outside. It will prevent children straying into the front areas of the grounds where they have easy access to Quay Street. The short picket fence extension will complete the enclosure. Children are on our site from our community parent and child toddler groups and our church services/youth events. The long fence will extend from the rear of the church building to the holly hedging (see#1). It will be mostly hidden from Quay Street and it will be obscured from Crown Place Maltings residents by the 3m high holly hedge. The fence would be of a wooden construction, of a horizontal lattice type (see #2) with a gate on the existing path. The additional storage would be adjacent to the church car park. It will replace the existing compost areas with enclosed storage and add an additional shed next to the existing bike rack. These will be of metal construction and to 1.75m high consistent with the existing shed. Whilst the boundary wall is 1.2m high on our grounds side, there are existing shrubs behind the compost area up to 2m high and these will remain.