Details required for Conditions 6 (Boundary Treatments), 11 (Nature Conservation Scheme) and 21 (Boiler Information) of planning permission 22/02689/FUL (Partial Demolition, erection of side and roof extension and alteration to existing detached dwelling house. Erection of new dwelling house with off street car parking and landscaped garden).

Compliance with condition 5 (Details), 6 (Windows and external doors) and 7 (Boundary wall) re permission 20/03621/FUL and conditions 5 (Details), 6 (Windows and external doors), 7 (Boundary wall), 10 (Fireplace), 11 (Floor investigation and works) and 12 (Internal doors) re permission 20/03622/LBC - Alterations to the north entrance including the new stone walling, rooflight and parapet to the north entrance. Internal alterations to the main house to alter layout, floor levels and insulate roof structure

Erect single storey rear extension and relocate house entrance, solar panels to extension roof, replace existing window with sliding doors and install balcony to side elevation at first floor level, alterations to landscaping, erect masonry boundary wall to side elevation and alter elevations

Two storey and first floor side and single storey front and rear extensions to dwelling house (living room/dining area, shower room, bedroom and en-suite), installation of a rear dormer to form rooms in the roof space and erection of boundary wall

Erection of a single-storey rear/side extension following demolition of existing rear conservatory and detached shed The proposed extension will extend out 5 meters from the existing rear external wall and will also wrap around the right hand side (north facing) of the house with a 1m gap to the boundary to allow for side access to the existing front side access gate. The entire length of the new rear extension including the side on it's rear elevation will be 8088mm which is longer than half the the original width of the existing house. The construction of the proposed extension will consist of timber, conventional masonry construction (brick and blockwork) a flat 'warm deck' roof with two lights and structural steels to support the existing rear masonry wall of the house to allow a spacious opening into the proposed floor area. The proposed 'wrap around' extension will accomodate a new utility room, kitchen and dining area which will integrate into the existing footprint of the house.

Non-Material Amendment to permission 95/00275/FUL granted 31.05.1995 for: Retention of existing house with extension and erection of 5 No 3/4 bedroom detached and terraced dwellings, garages/carports and associated ground works - renewal of 90/00323/FUL. Amendment would allow for Plot 2: - Reconfiguration of ground and first floor layouts. - A 65mm increase in the width and depth of the building to reflect Building Regulation requirements in relation to increased wall/insulation thicknesses, and the minimum width of the ground floor cloaks. - Provision of a level wheelchair approach and wheelchair accessible front entrance door. - Extend to the Eastern Boundary to accommodate 7.3 meter depth garage to Essex Guidelines and standards. - The replacement of two casement windows to the front elevation with 3 single casement windows. - Increase of narrow casements to standard with casements. - The removal of a three casement ground floor window and rear French doors and replacement with two tri-fold patio doors. - The inclusion of solar panels (as required to comply with building regulations). - Addition of 4 No Velux roof lights (3 to rear and 1 to front elevation.)

Change of use from Use Class C3 (dwelling house) to Use Class C4 (house in multiple occupation), retrospective works involving single storey rear extension, rear dormer, outbuilding, replacement roof tiles, replacement front boundary wall and front paving.

Demolition of existing bungalow and erection of five bedroom two storey replacement dwelling with accommodation at roof level including front and rear dormers, attached double garage with roof level accommodation to side, attached single storey pool house with pump room and raised terrace at rear. Alterations to existing access, formation of wider vehicular access to provide in/out driveway, construction of front boundary wall with sliding gates and installation of 1.8m high fencing to side boundary.

Removal of conditions 10, 11 and 12 of planning permission ref: 2017/03503/FUL granted 3rd November 2017 for the 'Conversion of a single family dwelling house into 1 x 3 bedroom self-contained flat, 1 x 2 bedroom self-contained flat and 1 x 1 bedroom self-contained flat; erection of a rear roof extension; erection of a single storey extension to the side of the main building and to the side and rear of the existing back addition; alterations to the rear elevation to include the installation of new windows, Juliet balconies and bi-folding doors; installation of new railings to the front boundary wall, and installation of a refuse and bike store in the front garden area' to allow the occupiers of Flats 2 and 3 to apply for street parking permits.

1) Erection of single storey ridged roof lounge/playroom side extension (5.1m long x 3m (max) wide). 2) Conversion of half of double garage to home office. 3) Erection of 1.8m high boundary fencing/wall and gates. (Revised Proposal)