Demolition of existing garage and conservatory. Erection of 1no. 1.5 storey, 1 bed dwellinghouse (Use Class C3). Formation of 2no. windows to side elevation and 1no. door to side elevation. Provision of bin and cycle stores and alterations to landscaping and boundary wall (Amended Description).

Erection of a two storey dwelling with rooms in the roofspace following demolition of the existing garage. Associated amenity space, new boundary fencing, refuse/recycling storage, cycle store and parking. Alterations to side elevation fenestration of existing house including removal of side bay window.

Demolition of existing garage and conservatory. Erection of a part single, part two storey rear extension to create 1 x 1 bed dwelling (Use Class C3). Removal and Insertion of 1no. window to rear elevation. Insertion of 2no. windows to side elevation. Insertion of 1no. door to side elevation. Provision of bin and cycle stores and alterations to landscaping and boundary wall.

Change of use of garage to self contained dwelling to include alterations to windows and doors, installation of boundary treatments and other associated works

Conversion of existing garage to habitable space. Erection of a single storey side extension. Subdivision of plot and conversion of existing annexe to create a 1 x 2 bed dwelling (Use Class C3). Alterations to fenestration. Provision of private amenity space and bin and bicycle storage. Partial demolition of boundary wall and erection of new boundary fencing. Lifting of dropped kerb. (Amended description and plans).

Change of use from offices to dwellings to provide 3 one bedroom and 2 two bedroom flats with associated cycle, refuse and parking area; alterations to front elevation of existing garage to include a new window; erection of single storey rear extension and boundary fence.

Demolition of rear extensions, front porch, and detached garage to rear, erection of two/single-storey rear extension, erection of front porch and replacement of 1no. front bay window, erection of detached outbuilding to rear of dwellinghouse, render to side and cladding and timber to rear, and alterations to front boundary to enlarge driveway access

Non-Material Amendment to permission 95/00275/FUL granted 31.05.1995 for: Retention of existing house with extension and erection of 5 No 3/4 bedroom detached and terraced dwellings, garages/carports and associated ground works - renewal of 90/00323/FUL. Amendment would allow for Plot 2: - Reconfiguration of ground and first floor layouts. - A 65mm increase in the width and depth of the building to reflect Building Regulation requirements in relation to increased wall/insulation thicknesses, and the minimum width of the ground floor cloaks. - Provision of a level wheelchair approach and wheelchair accessible front entrance door. - Extend to the Eastern Boundary to accommodate 7.3 meter depth garage to Essex Guidelines and standards. - The replacement of two casement windows to the front elevation with 3 single casement windows. - Increase of narrow casements to standard with casements. - The removal of a three casement ground floor window and rear French doors and replacement with two tri-fold patio doors. - The inclusion of solar panels (as required to comply with building regulations). - Addition of 4 No Velux roof lights (3 to rear and 1 to front elevation.)

Application under Section 73 of the Town and Country Planning Act 1990 to carry out development without compliance with Condition 1 (Approved Plans) of Planning Permission: 20/01769/FUL (Erection of single storey, single family dwellinghouse (following demolition of detached garage) with associated landscaping, amenity space, parking, cycle store and refuse enclosure Demolish Detached Garage, Erect One-Bedroom Detached Bungalow, Lay Out Parking Space and Garden, Lay Out Associated Hard and Soft Landscaping, Including New Boundary Treatments, and Construct Cycle Store and Recycling Bin Shelter) dated: 22/09/2020. Changes and alterations to roof design and fenestration to facilitate accommodation in loft space, amendments to internal layout and relocation of cycle store

New front boundary treatment including a sliding vehicular entrance gate, garage conversion, part first and second floor front/side extension with front undercroft, single storey side/rear extension, new roof over the existing dwelling, x1 front dormer, new front rooflights, x3 rear dormers and alterations to fenestration.