Details of Condition 4 Materials details as required by planning permission 20/AP/2164 dated 23/12/2020 for change of use and conversion from two units used as Houses in Multiple Occupation (Class C4) to 4 studio flats (C3) and 1, two bedroomed flat on the second floor, together with a rear second floor extension and ancillary amenity space, cycle and refuse area to the side and rear

Construction of ground floor rear extensions and conversion of existing ground floor flat to create 2x 1-bedroom flats and 1x 2-bedroom flat.

De-conversion from four self-contained flats to a single family dwelling, including addition of a single storey rear extension, two storey side extension and light well to provide a habitable room in the lower ground floor.

Non material amendment of planning permission ref. no. 20/AP/1119: Conversion of the existing first and second upper floors to 2 x 3 bedroom residential self-contained flats with associated refuse storage and the erection of a rooftop extension to form additional 1 x 1 bedroom flat. Proposed amendments include to: - Increase the height of the approved roof extension by 0.3m - Extend the footprint of 1m (width) x 4.5m (depth) to the northern elevation of the roof extension to utilise the existing staircase and internal reconfiguration; - Relocate the roof extension southwards by 0.3m with increases in depth and width from 13.8m to 14.5m and 5m to 5.8m respectively - Reorganise fenestrations to correspond with internal reconfiguration - Amend external material finishes from the aluminium framed glazing system and fibreglass resin roof to squared edge larch timber cladding, membrane roof and pine timber window frame

Construction of Infill extension and conversion to create separate Ground Floor and First Floor flats within the existing and extended property.

Non-material amendment following planning permission 21/AP/4724 (Construction of a part single, part two storey extension at lower ground and ground floor levels, and the enlargement of the existing front lightwell. Conversion of two flats into one dwelling house) to: Add skylights to the lower ground floor (LGF) and upper ground floor (UGF) extension to maximise natural light into the space; Increase the floor level of the lower ground floor by 200mm to reduce excavation works and aid with drainage issues; Increase the height of the LGF parapet to match the height of the neighbours ( No. 124) and help with the internal floor to ceiling height; Slightly increase the height of the UGF parapet by 150mm to help with floor to ceiling height; Change the layout of the front LGF courtyard to match No. 124s with a bike store and steps running parallel to the house.

Construction of a four storey side/rear extension and conversion of the rear of the ground floor and upper floors from a single dwelling to 4 flats: 1 x one bed one person flat and 3 x two bed three person flats.

Conversion of an existing single family dwellinghouse (Use Class C3) into 2x flats (Use Class C3); construction of a single storey ground floor extension with a first floor terrace; construction of a mansard roof extension.

Construction of mansard roof extension and conversion of upper floors (5 x room HMO) into 2 x self-contained flats (1 x studio, 1 x 2-bed flat) with the provision of the front entrance.

Conversion of three-bedroom dwellinghouse into two flats (1x1b2p and 1x2b3p) including erection of a ground floor single-storey extension rear extension and a mansard roof extension.