Demolition of existing flat roofed garage and construction of new home office and ancillary annexe, comprised of two floors with the lower floor set below ground level, use of timber cladding to match the dwelling, and new stepped terracing in the garden to allow access to the lower level. Erection of a trellis along the north-eastern boundary.

Construction of a single storey, part two storey, dwelling house with basement level, associated alterations to the boundary walls and fences, provision of hard and soft landscaping, cycle parking and bin stores. (Following demolition of existing garage)

Single storey rear extension with terrace above, construction of shed, pool building and swimming pool in rear garden, garage, upgrade works to house frontage, new chimneys, solar panels and front and side rooflights, front and side porches, changes to windows and doors, new access gates, landscaping and boundary treatments - following recent planning approval reference number PL/21/1586/FA in order to re-position proposed air source heat pumps

Demolition of tractor barn on north side of house, shed to east of East Stable, cart lodge/garage to north-east of house, outhouse adjacent to north-east corner of East Stable and lean-to forming part east side of north range Widening of southern entrance gateway and formation of new parking and turning area on west side of Church Farm. (Details all as submitted with Planning Application Ref: PF/21/3355.) Construction/erection of boundary walls and railings.

Demolition of existing rear extension, construction of two storey rear extension, front rooflights, erection of a replacement garage, alterations to external materials and fenestration, reconstruction of front porch and associated external works including motorised gate, new stairs up to house and new boundary wall to front and new patio to rear

Proposed demolition of existing detached house and garage, and construction of 3no. three-storey, five bedroom residential properties (Use Class C3(a)), with associated parking, landscape and boundary treatments.

Listed building consent for the construction of a new oak framed timber garage, introduction of a new gable window to an existing stone clad garage to retain roof space as a home office and retention of a 2.7m high retaining wall to site boundary

1) Erection of garden room measuring (L) 6500mm x (W) 3500mm x (H) 2500mm in rear garden of property as indicated in plan, consisting of timber frame, uPVC framed glass doors/windows facing into garden - room will be insulated and there will be a partitioned W/C. Foul water removal to be connected into existing house foul water drain. Outside of building will be finished in composite and timber cladding. Room will be connected to house water and electrical supply. 2) Erection of shelter (A) measuring (L) 6000mm x (W) 3500mm x (H) 2800mm (max height of pent roof) in rear garden of property as indicated in plan. Shelter will be of timber construction with coated metal roofing. Shelter open on 3 sides facing into garden and enclosed to rear (adjacent to boundary wall). 3) Erection of shelter (B) measuring (L) 3900mm x (W) 3000mm x (H) 2500mm (max height of pent roof) in rear garden of property as indicated in plan. Shelter will be of timber construction with opaque toughened glass or polycarbonate/PVC roof. Shelter enclosed on 3 sides by existing buildings and open to front, facing into garden. 4) Works to existing workshop adjoining house to convert into living space. Work to be carried out to damp proof and insulate room and connect to existing central heating system and electrical supply. Current access door leading to neighbouring property to be blocked up from inside but existing timber door will remain to retain external appearance exactly as is now. Existing external door leading to applicants garden to be enlarged and replaced by uPVC doors. Internal personnel door to be re-instated between existing garage and barn room. 5) Replacement of all existing doors and windows with new double glazed uPVC doors & windows.