Demolition of an existing shed, single garage and rear extension, erection of two storey front, rear and single storey side extension. Hip to gable roof extension with 3nos front dormer, rear dormer and balcony. Erection of a single storey rear outbuilding double garage, front boundary with pillars, railings and gates. Formation of drop kerb, new pedestrian and vehicular access. Fenestration alteration.

Redevelopment of the site to create the Hillingdon Watersports Facility and Activity Centre including demolition of existing Broadwater Lake Sailing Club (BSC) clubhouse at the north of the lake and erection of a building to be occupied by HOAC and BSC including changing facilities, meeting rooms, storage, Workshop and seasonal worker accommodation (sui generis), activity shelters; installation of pontoons and concrete slipways; boat shed; equipment storage huts (north of lake and at entrance); boat parking and racking areas; camping area; outdoor activity areas; ecological enhancement throughout the site; new pedestrian routes through the peninsula; landscaping including new woodland, dense vegetation screens and boundary treatment; new access and access road; localised dredging and land reclamation; relocation of existing sailing area and creation of floating and fixed islands within the lake; coach drop off and turning area; vehicle parking; cycle parking; and associated works. Hillingdon Council - application number 2382/APP/2023/2906

Removal of existing front boundary hedge and erection of brick wall with timber fence panel infills; erection of shed in front garden

S19 to vary condition 2 (Approved plans) of listed building consent 23/02281/LBC (Unification of Nos 4 and 6 Church Way into one single dwelling together with internal alterations, replacement of external chimney stack flashing with lead flashing. External works to remove boundary fence between No 4 and 6, removal of dilapidated sheds and erection of new single shed) to increase area of removed/replaced tile floor from just the Bathroom in No 6 to also include the adjacent Entrance Hall.

Remove a dead hawthorn tree that partially collapsed into nearby trees and is overhanging the rear garden of 5 Briar Mead. In addition clear over hanging branches up to 2.5 metres from ground level that are overhanging the fence line to allow the installation of a new boundary fence and to protect the roof of the garden shed that sits underneath the trees as the felt is being ripped and damaged.

Tree number - G1 Tree type - x2 Hazel (Corylus avellana) Approx Height - 5m Location - Front garden Right hand boundary Service - Prune Work required- reduce height down to approximately 3m, cut back to provide approximately 1m clearance from clients house Reason - as part of continued maintenance Tree number - T1 Tree type - Laurel (prunus laurocerasus) Approx Height - 1.5m Location - Rear garden left hand boundary near house Service - Prune Work required- remove dead section (see photos) Reason - section is near to dead Tree number - G2 Tree type - Laurel (prunus laurocerasus) Approx Height - 4m Location - Rear garden Rear boundary Service - Prune Work required- reduce height down to approximately 2.5m (gutter height of adjacent shed/garage Reason - as per clients wishes Tree number - T2 Tree type - Plum (prunus spp) Approx Height - 6m Location - neighbours tree, overhangs clients Rear garden Right hand boundary and clients Apple tree Service - Prune Work required- cut back to boundary the overhang to clients garden Reason - to reduce encroachment

Construction of garden shed and new boundary fence to rear garden.

Application for the approval of details reserved by conditions no. 3 (Details of materials/samples to be submitted), no. 4 (Construction Environmental Management Plan [CEMP]), no. 5 (Boundary Treatments), no. 6 (Soft and Hard Landscaping Scheme), no. 7 (Arboricultural Method Statement), no. 8 (Surface Water Drainage), no. 10 (Submission of Highways Details) and no. 14 (Details of Sheds) of planning permission ref. 23/00263/CV (Application for the variation of condition nos. 2 (plans) of plann...

Reconfiguration and refurbishment of existing retail unit (Class E) comprising external alterations, including new shop front and customer entrance feature, trolley corral, revised parking layout, external display area, secure compound with forklift truck shed and associated works without complying with conditions 2, 3, 7, 9, and 14 of planning permission 22/01235/FUL to amend the building footprint, site layout, external materials, boundary treatments, external lighting and hard surfacing

Works to TPO trees: Rear of Car Park - Bay No.7 T1 - Ash in Decline Fell to ground level and remove hanging limb from adjacent Sycamore. - The tree is located on the front boundary to the rear of parking bay No7 - The tree is in decline due to Ash Dieback and has shed a limb which is hung up in the adjacent Sycamore Tree ? T4 - Due to Ash Dieback the tree has not long term future - Risk of further limb or branch shedding or complete failure if retained - Replacement panting has been agreed. Rear of Car Park - Bays No. 8 & 9 T2 - Dead Poplar Fell as close to ground level as possible. - The tree is located on the front boundary to the rear of parking bay?s No?s 8 & 9 - The tree is dead and risk of branch or limb shedding or complete failure if retained - Replacement tree has been agreed Side of Car Park - Bay No.11 T3 - Leaning Sycamore in Decline Fell as close to ground level as possible. - The tree is located on the front boundary to the side of bay No7 - The upper crown is completely dead - The tree is leaning towards parking bays - The tree is at risk of branch or limb shedding or complete failure if retained - Replacement tree has been agreed Right Hand Side of Car Park Bay No.7 T4 - Sycamore Remove major dead wood. Client to monitor. - The tree is located to the left hand side boundary line - Removal of deadwood - exempt works