1 Lime rear boundary RHS Re-Pollard back to previous pollard points at 6 metres from ground level, removing approximately 8 metres regrowth 14x6m down to 6x2m works to alleviate stress on old decaying pollard points 2 Chestnut rear boundary Re-Pollard back to previous pollard points at 6 metres from ground level, removing approximately 5 metres regrowth 11x6m down to 5x2m works to alleviate stress on old decaying pollard points 3 Beech rear garden LHS Multiple crossing stems and weak included union on main stem at approximately 4 metres. Crown Reduction - Reducing the height and spread of the tree by up to 2.5 metres. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth 12x9m down to 9.5x6.5m(reasons are within the spec)

T1. Bay rear garden RHS - Crown Reduction. Reducing the height and spread of the tree by up to 5 metres and remove major deadwood greater than 25mm in diameter. Reduce encroachment into neighbours to boundary line. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected re growth 14x10m down to 9x5m Dieback in upper crown T2. Variegated Holly rear garden RHS - Crown Lift to provide 3 metres clearance from ground level and clip round to shape and tidy, removing up to half a metres growth 10x6m. Works to clear pathway.T3. Beech x 2 rear garden RHS - Crown Reduction. Reducing the height and spread of the tree by up to 3 metres and remove major deadwood greater than 25mm in diameter. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected re growth 18x12 down to 15x9m Tight included compression fork at 3m. Works to alleviate stress on weak union.T4. Holm Oak x 3 rear boundary - Crown Lift to provide 3 metres clearance from ground level 9x7m. Works to allow light under trees.T5. Yew rear garden LHS - Crown Reduction. Reducing the height and spread of the tree by up to 2 metres. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected re growth 10x9m down to 8x7m. Works to reshape tree following the failure of an adjacent tree and to clear neighbours shed and boundary wall.T6. Leyland Cypress rear garden LHS - Reduce height by approximately 3 metres and shape laterally as required 16x10 down to 13x8m. Works to allow light to rear of property.

T.P.O No.26 of 1990, T1 - T21 - Crown lift the lateral limbs to appropriate growth points up to 8 metres height along length of the field and woodland boundary including over the stables.

T1 - PAULOWNIA Tree is almost completely dead. Fell. Replacement paulownia has been planted elsewhere in garden Ts2 - ELMs. Dead. Fell. A number of small elm trees along the boundary hedgerow with neighbouring property ?Partridges?. Other trees will grow to replace dead trees from within the hedgerow T3 - SYCAMORE. Remove lower branch. Single long branch extends out over wall and roof of stables. Remove in order to protect structures just below it.

- 1. Yew on rear boundary reduce and reshape LHS of tree To shape / tidy. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth and shall not exceed beyond the previous crown reduction points. 8x6m down to 7.5x5.5m encroaching on lawn area. - 2. Yew in rear garden behind Beech hedge / seating area. Crown Reduction. Reducing the height and spread of the tree by up to 4 metres, remove 1st low limb to crown lift over lawn. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth. Height pre works 15m post 12m crown spread pre works 15m post 12m 6x2m down to 4.5x2m to maintain size. - 3. Repair holes in lawn area by rose bed in top corner of garden behind garage created while felling ash in neighbours. supply grass seed and approx 1 wheelbarrow worth of topsoil. 3. 7x5m damaging path and patio area. -5. Oak on boundary with Gatton road - Reduce limb growing through and spoiling the visual appearance of the adjacent Yew tree (item 4) to in line with fence Low 7? limb to reduce by approximately 5 metres. -6. Yew on rear boundary reduce and reshape LHS of tree To shape / tidy and shorten 1 branch to the right. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth and shall not exceed beyond the previous crown reduction points. 8x7m down to 8x5.5m works to improve the visual appearance. -7. Holly rear boundary - Reduce / trim all over to shape 4x4m down to 4x3m works to improve the visual appearance. -8. Mixed species rear garden RHS - Reduce / trim encroachment over lawn and remove dead Cypress to ground level 6x5m down to 6x4m encroaching on lawn

1. (TB2) twin-stemmed (from ground level) beech tree - Removal of one bough from the one stem. largely on my neighbour's side of our boundary fence but with some of the trunk in my garden, and one stem leaning westwards towards my house and thus almost completely overhanging my garden. After taking advice from a tree surgeon I would like to remove one bough from the one stem, reducing the weight over my garden. Please be aware that my house is 10 years old and so far my property has been damaged three times by beech trees blown over by prevailing SW winds. Several years ago a mature tree fell over from the garden of 4 Elvetham Close causing significant damage to the roof of my house. In February 2022 two mature beech trees growing next to each other fell from the garden of Chase House, causing significant damage to my garden, fences and outdoor furniture and more minor damage to the house. I, and my wife in particular, are now concerned about the stability of any trees that are within striking distance of our house, lean our way, and share root balls with other trees. In this respect TB2 is our main concern. We would like to keep such trees pruned and stable. Please also note that my answer the question about tree ownership relates to TB2 only - TSC1 is mine.

Pin Oak (LHS side of property, close to boundary) - Reduce the height and spread of the tree by up to 2.5m. The lower SE, S & SW (overhanging neighbouring property) laterals have been reduced heavily in the past in an attempt to pull into shape - reduce regrowth back to suitable live growth in line with remaining canopy. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth. Remove any major deadwood over 20mm diameter. Suitable access for our tracked MEWP - take boards to protect lawn from track damage. Measurements: Pre works - 26x19m Post works - 23.5x16.5m.

Approval of details reserved by conditions 3 (the means of access into the site has been laid out as a shared private drive having a width of no less than 6.0 metres for a distance of 10 metres in rear of the highway boundary and constructed and surfaced in a stable and durable manner in accordance with details), 5 (Construction and Demolition Environmental Management Plan (CDEMP)), 8 (details of new nesting opportunities either integral to or mounted to the buildings or mounted on suitable trees) and 12 (details of a charging point for electric vehicles to be installed for each dwelling) of planning permission reference NW/22/00273/FUL

Gl. A group of overhanging Pear, Poplar and sapling Ash to rear of no. 140 and Maple, Holm Oak, variegated Holly and Yew to rear of no. 142. Works: Crown lift to 4m and back to boundary to suitable growth points, retaining overall height and form. Tl. Ash to the rear of No 140. Works: Crown lift to 4m retaining overall height and form. T2. A Lime tree to the rear of No 142. Works: Crown lift to 4m and back to boundary to suitable growth points, retaining overall height and form. G2. A group of two multi-stemmed Cherry Laurel approximately 2.Sm in height adjacent to disused stable block. Works: Fell to ground and treat with ecoplugs to prevent re-growth. Reason: To abate damage. G3. A group of Ash and Sycamore overhanging disused stable block retaining overall height and form. Works: Crown lift to 4m and back from roof to suitable growth points, retaining overall height and form. G4. A group of boundary Ash and Sycamore overhanging disused stable block. Works: Crown lift to 4m and back from roof to suitable growth points, retaining overall height and form.

T1. Bay front RHS - Reduce height to previous points of reduction just below BT lines and clip round to shape 5x4m down to 3x2m encroaching on phone lines and building. T3. Hazel rear LHS - Reduce height to 3 metres tall and shape 6x5m down to 3x3m encroaching on building. T5. Cherry rear garden RHS - Crown Reduction. Reducing the height and spread of the tree by up to 1-1.5 metres. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth 7x6m down to 5.5x4.5m to allow light underneath. T8. Holly rear boundary - Reduce encroachment over shed by 1 metre 5x4m down to 5x3m.