T1 Hornbeam Crown Lift to provide 4m clearance from ground level, G1 Hornbeam Crown Lift to provide 2.5m clearance from shed roof, T2 Oak Crown Reduction - Reducing the height and spread of the tree by up to 2-3m, T3 Oak Crown Reduction - Reducing the height and spread of the tree by up to 2m and remove deadwood, T4 Silver birch Crown Reduction - Reducing the height and spread of the tree by up to 2m, Works to maintain trees size, and to increase light into the woodland understory. (TPO1/1971)

Remove a dead hawthorn tree that partially collapsed into nearby trees and is overhanging the rear garden of 5 Briar Mead. In addition clear over hanging branches up to 2.5 metres from ground level that are overhanging the fence line to allow the installation of a new boundary fence and to protect the roof of the garden shed that sits underneath the trees as the felt is being ripped and damaged.

Tree 1 - Elm reduction by 25%, to bring canopy into the same shape as the elm behind (they share canopy shape). This is to allow more light to the plants and shrubs below, south Tree 2 - Eucalyptus, pollard to reduce height, straighten growth and bring away from shed roof, north

1. Buddleia- Fell and grind out stumps 2. Prunus species Fallen- Fell and remove stump, including all loose cuttings. 3. Laurel Neighbours- reduce overhang back by approx. 2m or to midway on shed roof. Tree Height 7m and crown spread 6m (Leaving as crown spread of 4m) 4. Goat Willow x 2 Repollard to previous points. Tree Height 9m and crown spread 5m. ( Leaving a height of 6m and spread of 4m).

SECTION 211 NOTIFICATION FOR WORKS IN A CONSERVATION AREA G1, Mixed Species - Remove dead stems from ivy clad hazel to approx. 500mm from ground level; maintain clearance of lower branches over the driveway to a height of approx. 4.5m from ground level and 0.5m from kerb line. G2, Mixed Species - Prune back low branches in contact with the wall, fence to maintain a clearance of up to 1.0m where possible; prune low branches over paths to statutory height of 2.5m from ground level; prune branches over property roof to achieve a clearance of approx. 1.5m, targeting secondary points of pruning (approx. 1.5m lateral growth); remove Elder growing close to the fence and treat stump. G3, Mixed Species - Reduce tops of the Yew by approx. 2.0m from highest apical tip; trim face next to the driveway; top Beech to points of previous pruning by removing approx. 3.0m in height to leave a finished height of approx. 2.5m from ground level; trim side lateral growth on the garden side. T1, Ash - Remove lowest x 2 branches growing over the vicarage roof to source; prune branches above the vicarage to maintain a clearance of approx. 2.0m from the roof by pruning back to secondary points of pruning. G4, Mixed Species - Prune back low branches in contact with the fence to source; prune overhanging branches back to party line along entire group, to the tops of the plants; remove Elder and rose growing on the vicarage side of the fence; prune back remaining Elders back to party line and away from the fence; prune Elder to clear BT cable. T37, Horse Chestnut - Remove chestnut growing next to the fence to approx. 50mm from ground level. T38, Ash - Remove major and moderate deadwood; prune secondary branch to reduce potential notch stress by drop crotch pruning longer lower branches (see photo). T39, Lime - Raise low branches to approx. 4.0m by removing branch over shed and x 2 over neighbouring fence to source; remove x 2 low branches towards the Ash to source; raise remaining branches to approx. 4.0m from ground level by targeting secondary points of pruning; remove basal epicormic and elder. T2, Indian Chestnut - Reduce limb to the Southwest growing towards the Lime, by approx 3.0m of lateral growth; remove elders from basal area. T45, Sycamore - Reduce regrowth where squirrel damage is compromising structural integrity; remove moderate and major deadwood; maintain statutory clearance over the tow path. G5, 8 x Yew, Hazel - Maintain statutory height clearance of 2.5m over the tow path; remove moderate and major deadwood over the tow path; remove cluster of hazel in the corner of the chain-link & wooden fence. T43, Sycamore - Remove major and moderate deadwood from over the footpath. T42, Sycamore - Remove major and moderate deadwood. G6, Laurel, Yew - Prune to maintain a clearance of approx. 1.0m from the fence where possible; this will not include whole tree removal unless stems are less than 75mm in diameter; maintain statutory height clearance over public footpath. T47, Sycamore - Remove some lower understory laurels to achieve a clearance of approx. 2.0m from the base of the tree. T3, Sycamore - Remove sycamore and identified laurel stem.

T1- row of Laylandi and cypress to crown raise to 2-3 meters at rear of garden which is not in a conservation area T2- Reduce cherry by 1-2 meters T3- Poplar crown raise to 3 meters to allow clearance from shed roof T4- Budlia reduce to fence line which would be a couple of meters

To prune back a bay from 4m to around 2m, prune back a fig tree as branches are now interferring with a shed roof and extension roof and prune a conifer which is currently 5m.

T1 - Cherry, 5m reshape and prune to 3m- T2 - Christmas tree, Remove - T3 - Plum, Trim approx 2m - T4 - Bay, Trim approx 2.5m - T5 - Apple Tree, Trim to approx 5m - T6 Hawthorn, Remove as dead- T7 - Rowan, 8m prune back to 7m and tidy - T8 - Cherry, 9m Trim to 5m and shape - T9 & T10 Lime - Trim 22m approx trim lower branches on top of shed roof

G13 removing dead branches from Ash tree. T37 lifting of crown of ash tree to stop lowest branches resting on roof of shed and garage.

Details of Condition 4. Tree protection as required by planning permission 22/AP/2987 dated 25/11/2022 for construction of a single storey rear extension with integrated canopy. Demolition of the existing shed and construction of a new shed building and bike store to the side. Facade alterations to replace the existing windows and cladding. Renovation of the existing porch/garage to include a new roof, cladding and glazing. Installation of two rooflights to the rear roof slope. Boundary alterations to continue the existing hit and miss brick wall. Excavation works to create a lower patio level linking the new shed building to the main house and minor landscaping works to reform the front and rear gardens.