Submission of details to comply with condition 4 (tree protection) attached to planning permission 23/0665/FFU for the erection and relocation of stables and tack room following demolition of existing, for private equestrian use.

Variation of Condition 2 (Approved plans) of 19/01783/FULLN (Convert stable to ancillary accommodation to Bank Tree Farmhouse) to allow for existing rooflights to be changed to conservation type and 1 No. additional conservation rooflight

Trees T1, T3, T4 & T5 - Crown Lift to achieve a maximum clearance over the garden area and/or parking spaces of 3metres between the branch tips and the surrounding surface. No pruning wounds greater than 80mm in diameter to be generated as a result of the works. Crown Reduce tree canopies on the adjacent building sides only to achieve a maximum clearance of 2metres between the branch tips and the adjacent building structure. No pruning wounds greater than 80mm in diameter to be generated as a result of the works. Additional - Tree T1 Silver Pendant Lime - Prune back branches to create 2m of clearance from the telecoms cables. Tree T2 Silver Pendant Lime - Crown lift to a height of 3m to provide clearance over the car parking area. Tree T3 Copper Beech - Remove broken branch from lower crown. Tree T6 Copper Beech - Crown lift over the stable building and shed to provide 2m of clearance between the branch tips and the adjacent building structure - No pruning wounds greater than 80mm in diameter to be generated as a result of the works.

Compliance with conditions notification 23/00229/FUL (Construction of stable block) Condition 4 - Tree retention & protection. Condition 5 - Foul drainage. Condition 7 - Stable waste management. Condition 12 - Biodiversity enhancement strategy.

T1 Twin stemmed Maple - Fell to ground level. T2 Dead Sycamore - Fell as close to ground level as possible. T3 Oak - Reduce crown over stables by 2-3m to reduce overhang. T4 Beech in horse field - Fell due to hollow trunk . T5 Lime - Reshape, reducing targeted branches by 2-3m to rebalance crown and remove all deadwood. T6 Sycamore sapling - Reduce to 2-3m in height due to Squirrel damage . T7 Mixed (BT Line) - Clear BT line on both sides of front driveway, using MEWP. Reduce Ivy covered dying stem to a safe height. SUBJECT TO TPO BB & OUDC 1 (27.10.1952)

Hawthorn (x2) : reduce the weight at the top of both trees, to remove dead branches and to create a more stable and balanced shaped canopy. The overall reduction in height will be approx 0.5m.

Demolition of existing stables/garage and erection of replacement outbuilding (comprising garage and ancillary accommodation) to serve Elm Tree Farm.

1 Lime rear boundary RHS Re-Pollard back to previous pollard points at 6 metres from ground level, removing approximately 8 metres regrowth 14x6m down to 6x2m works to alleviate stress on old decaying pollard points 2 Chestnut rear boundary Re-Pollard back to previous pollard points at 6 metres from ground level, removing approximately 5 metres regrowth 11x6m down to 5x2m works to alleviate stress on old decaying pollard points 3 Beech rear garden LHS Multiple crossing stems and weak included union on main stem at approximately 4 metres. Crown Reduction - Reducing the height and spread of the tree by up to 2.5 metres. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth 12x9m down to 9.5x6.5m(reasons are within the spec)

T1 Horse Chestnut: Crown lift epicormic growth to 5m from ground level; Crown reduce secondary growth towards the dwelling to achieve a maximum space of 2m; Remove branch being damaged and causing damage by direct contact to stable roof.

Demolition of existing stables and erection of a garden house incidental to the enjoyment of the existing dwelling house. (Tree information, revised plans and updated Design and Access Statement received 29.09.2023)