T103 Lime. Old tear out wound approx 7m southern side main stem. Significantly elongated, wind exposed crown. Reduce height by approx 8m. Reduce radial width to south and east to balance. May need to pollard some scaffold limbs to return crown to stable dimensions when regenerates. T104 Lime. Elongated wind exposed crown will be even more so following works to adjacent T104/105. Reduce height by 5m, radial width to balance. T105. Significant basal decay. Fell. Replace with elm or lime, 12/14cm girth, approx 3m height. Containerised standard. Location marked on sketch map. T107 Lime. Elongated wind exposed crown will be even more so following works to adjacent T104/105. Reduce height by 5m, radial width to balance. T124 Birch. Fell. Significant basal decay. Replace with Sorbus sp. 12/14cm girth, approx 3m, containerised. Standard tree. Similar location to felled tree. T125 Oak. Reduce height from approx 12 to 10m. Radial spread to n, s, e, w approx 8 to 6m. T127 Laburnum. Basal decay - Ganoderma bracket present. Remove dead, reduce crossing limbs to south approx 1.5m. reduce end weight remaining limbs by no more than 0.5-1m sufficient to retain tree safely.

T1 Crimson King Maple - Reduce overhanging branches on Stable Close side by 1.5m. Height Reduction of 1.5m.

Beech (overhanging neighbours at 9 Fenton Rd) Reduce the height and spread of the tree by up to 2m and thin canopy by removing established epicormic growth. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected regrowth. Written consent from the neighbour is required before works commence. Reason: Good arboricultural practice to maintain reduced trees. The crown thinning element will remove the potential for future crossing and rubbing branches. Pre works 15x14m, Post works 13x12m

Remove basal and epicormic growth from main stem and reduce the lateral crown spread over the Stables driveway/property by around 2 metres x 2 Lime (T1 & T2) and remove basal and epicormic growth from main stem and reduce the lateral crown spread over the Stables driveway/property by around 2 - 3 metres x 1 Lime (T3)

Compliance with conditions notification 23/00106/FUL (Demolition of existing stables and outbuildings. Construction of a two storey outbuilding incorporating stables, garage and hobby room with solar panels.) Condition 6 - Stable waste management. Condition 8 - External illumination details. Condition 11 - Biodiversity Enhancement Strategy. Condition 12 - Tree Protection Method Statement. Condition 13 - Hard landscaping.

Fell Sycamore TPO 140 T1 and plant replacement tree 20m away from Rectory Stables.

T1. Bay rear garden RHS - Crown Reduction. Reducing the height and spread of the tree by up to 5 metres and remove major deadwood greater than 25mm in diameter. Reduce encroachment into neighbours to boundary line. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected re growth 14x10m down to 9x5m Dieback in upper crown T2. Variegated Holly rear garden RHS - Crown Lift to provide 3 metres clearance from ground level and clip round to shape and tidy, removing up to half a metres growth 10x6m. Works to clear pathway.T3. Beech x 2 rear garden RHS - Crown Reduction. Reducing the height and spread of the tree by up to 3 metres and remove major deadwood greater than 25mm in diameter. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected re growth 18x12 down to 15x9m Tight included compression fork at 3m. Works to alleviate stress on weak union.T4. Holm Oak x 3 rear boundary - Crown Lift to provide 3 metres clearance from ground level 9x7m. Works to allow light under trees.T5. Yew rear garden LHS - Crown Reduction. Reducing the height and spread of the tree by up to 2 metres. All pruning cuts shall be made to suitable secondary growth points and shall maintain a stable platform for the expected re growth 10x9m down to 8x7m. Works to reshape tree following the failure of an adjacent tree and to clear neighbours shed and boundary wall.T6. Leyland Cypress rear garden LHS - Reduce height by approximately 3 metres and shape laterally as required 16x10 down to 13x8m. Works to allow light to rear of property.

Tree Preservation Order application: T2 - Alder (TAG 891) - Reduce crown by 2-2.5 metres this will leave a spread of approx. 4 metres and height of 8 metres. Compacted Union, Stable at Time of inspection

Based on Simon Pryce report we would like to carry out the following works. Tree 1 Cut down to match other hedgerow trees Tree 2 Coppice to near ground level Tree 3 Coppice to near ground level Tree 4 Remove tree Tree 5 No works Tree 6 Remove Tree Tree 7 Remove Tree Tree 8 no works Tree 9 Collapsed tree remove Tree10 no works Tree 11 Collapsed tree remove Tree 12 Remove Tree Tree 13 No works. WE are sad that these trees have to be removed but having had an oak tree collapse in the winds last January demolishing 5 stables and a hay store we do not want a repeat. We have planted more than 120 trees on our property in 2021.

T.P.O No.26 of 1990, T1 - T21 - Crown lift the lateral limbs to appropriate growth points up to 8 metres height along length of the field and woodland boundary including over the stables.